Impeller
Size: 155mm~225mm
pump impellers are interchangeable with AH/HH/LM pump impellers, The Impeller is one of the most important parts for slurry pump. Centrifugal slurry pumps need impeller to produce the centrifugal force which transfer the . The centrifugal force is produced by the impeller which rotates to a certain speed, As main rotating component which normally has vanes to impart the centrifugal force to the liquid, Usually, slurry pump impellers have a plain or a Francis type vane.
Impeller for 8AHF Pump
Description 11 inch Impeller 19121-70-30 is used for 6x5x11 Mission Magnum Centrifugal Sand Pumps. provides 19121-xx-30 impellers for Mission Magnum centrifugal pump 6x5x14: 19121-70-30 Impeller 6 x 5 11 inch 19121-80-30 Impeller 6 x 5 12 inch 19121-90-30 Impeller 6 x 5 13 inch 19121-A0-30 Impeller 6 x 5 14 inch Fully open impeller, best design for the chemical process industries services. Ideally suited for corrosives and abrasives, handles solids and stringy fibers with ease. Allows for simple restoration of clearances when wear takes place. Back pump-out vanes reduce pressure on the shaft seal, reduce axial thrust on the bearings. Part size cast into the impeller. This makes part identification easier. Impeller gasket in included with impeller All impellers are dynamically balanced Offered Hard iron and other materials upon request
OEM Andritz ACP series pump spares Impeller ACP 150-400.5 semi-open type in a highly wear-resistant design.
Interchangeable Pump Parts Impeller ACP 80-250 3+3 SO of EN.1.4474 are widely used for highest efficiencies in various industrial applications.
Impeller Material: 45# Weight:0.623kg Process:Investment casting Description: An impeller is a rotor used to increase (or decrease in case of turbines) the pressure and flow of a fluid.
Medium: flue gas with sintering dust Dust content: 100mg/Nm3 Flow rate: 550000m3/h Full pressure: 150mmH2O Speed: 580 rpm Working temperature: 280 degrees Maximum temperature: 350 degrees
Pump Body and Impeller of Precision Castings We produce all kinds of Pump body, Impeller and Housings using the world advanced founding technology for Various kinds of Pump under a whole line process of melting, casting and heat treatment. They can be Manufactured by the metal mold and use the way of Lost wax Precision Investment castings. It has the features of consistent fitting with matching surfaces in crushers and it is suit to different application. The material include: ASTM A240 - 329 = DIN X8CrNiMo27 5 (1.4460) Hastelloy C-276 Stellite UmCo50(DIN 2.4778) Duplex Stainless Steel ASTM A216 -WCB (J03002) ASTM 352- LCC = DIN GS-20Mn5 (1.1120) ASTM A351 -CF-8 (= DIN G-X6CrNi18 9 ) ASTM A351 -CF-8M (= DIN G-X6CrNiMo18 10 ) ASTM A351 - CF3M =(DIN1.4462 x2CrNiMoN22-5-3) AS 2027 (27% Cr) DIN1.4832 GX 25CrNiSi 20-14 DIN1.4837 GX 40CrNiSi 20-12 DIN1.4865 GX 40NiCrSi 38-18 And etc
