ZG-D6MW Open Display For Mobile Phone
With alarm function, this ZG-D6MW is mainly designed for High-Theft Solutions of open merchandises such as Mobile, mp3/mp4, PDA, GPS, and etc..
Secure & neat displays of these merchandises, interactions between consumers and merchandises are also realized with this product. And thus better promote sales of open merchandises.
Technical parameters:
1) With alarm function
2) 13cm (standard) or customize
3) Aluminous stand, with adjustable top holder, Use for Mobile, mp3/mp4, PDA, GPS, and etc.. When the exhibit is separate from the sensor, or the sensor is separate from the stand, or the sensor is cut, or the stand is separate from the table, it will alarm immediately.
4) Retractor (pull box) inside the stand
5) Inbuilt battery type: 3.6V/ER14250
6) Exterior power adapter: DC-6V
7) Maximum battery standby: 1 year
8) Alarm volume: 85-105DB
9) Alarm indication: red LED light twinkling
10) Tamper indication: green LED light twinkling
11) Low battery indication: red LED twinkling with a "beep" given
12) Turn on / off alarm: sound & light indication
13) Alarm switch: Key (standard)
(If remote control is required, please make statement before ordering. Thus we can pre-design it for you!)
14) Adhesive base: T-shaped metal mounting base.
(If required, please make statement before ordering)
15) Shell material: ABS & aluminous stand.
36 sets per carton.
Zg-d6mwh2-c security display holders for mobile phones With alarm function, this zg-d6mwh2-c is mainly designed for retail security displays of live merchandises such as mobile phones, mp3/mp4, pda, gps, and etc.. Secure & neat displays of these merchandises, interactions between consumers and merchandises are also realized with this product. And thus better promote sales of open merchandises. Technical parameters: 1) with alarm function 2) stand height: 5.5cm (standard) or customize 3) aluminous stand, remote control, double protection, with adjustable top holder, use for mobile display, can charge for mobile phone. When the exhibit is separate from the sensor, or the sensor is separate from the stand, or the sensor is cut, or the stand is separate from the table, it will alarm immediately. 4) without retractor (pull box) inside the stand. 5) inbuilt battery type: 3.6v/er14250 6) exterior power adapter: dc-6v 7) maximum battery standby: 1 year 8) alarm volume: 85-105db 9) alarm indication: red led light twinkling 10) tamper indication: green led light twinkling 11) low battery indication: red led twinkling with a "beep" given 12) turn on / off alarm: sound & light indication 13) alarm switch: remote control . 14) adhesive base: t-shaped metal mounting base. (if required, please make statement before ordering) 15) shell material: abs & aluminous stand. 36 sets per carton.
ZG-D6MH2 With Alarm Function Mobile Phone Holder With alarm function, this ZG-D6MH2 is mainly designed for High-Theft Solutions of open merchandises such as Mobile, mp3/mp4, PDA, GPS, and etc.. Secure & neat displays of these merchandises, interactions between consumers and merchandises are also realized with this product. And thus better promote sales of open merchandises. Technical parameters: 1) With alarm function 2) 13cm (standard) or customize 3) Aluminous stand, Remote control, Double protection, Use for Mobile, mp3/mp4, PDA, GPS, and etc.. When the exhibit is separate from the sensor, or the sensor is separate from the stand, or the sensor is cut, or the stand is separate from the table, it will alarm immediately. 4) Retractor (pull box) inside the stand 5) Inbuilt battery type: 3.6V/ER14250 6) Exterior power adapter: DC-6V 7) Maximum battery standby: 1 year 8) Alarm volume: 85-105DB 9) Alarm indication: red LED light twinkling 10) Tamper indication: green LED light twinkling 11) Low battery indication: red LED twinkling with a "beep" given 12) Turn on / off alarm: sound & light indication 13) Alarm switch: Remote control 14) Adhesive base: T-shaped metal mounting base. (If required, please make statement before ordering) 15) Shell material: ABS & aluminous stand. 36 sets per carton.
High Quality Anti-theft Alarm Stand for Cellphones Features 1. Secure, charge different cellphones, tablets 2. Charge Alarm function 3. Sensor head locked to the base by screw to avoid false disconnection 4. Simple to Use, Attractive Display 5. Protect both cellphone, and accessory(headphone, speaker) at the same time
Item specifics Brand Name: COMER Model Number: KM-PA800 Compatible Brand: Other Has Speaker: No Charger: Yes Car Holder: No Material: ABS+ acrlyic function: alarm and charging operation: remote control use: security for display suitable for: mobile phones, tablets Packaging Details Unit Type: piece Package Weight: 4.00kg Package Size: 11.00cm x 7.00cm x 13.00cm (skype ID:7Karen_Li, www.alarmstand.com, WhatsApp / Mobile / WeChat / imo / LINE / Viber:+8613556776136) (Email: karen@holderprotection.com) Features: 1)Mobile phone Security display holder with alarm function 2)With sticker connecting the samples which effectively prevent showing products from being stolen in exhibition, supermarket and shops, 3)Allowing customers to take the sample on hands and try it freely 4)Mainly designed for secure displays of live merchandises like mobile phones, cameras, mp3/mp4, PDA, GPS, ang other valuable product 5)Secure&neat displays of merchandises, interactions between consumers and merchandises are realized with this product,thus better promote sales of open merchandises. The security alarm display holder will alarm in following conditions: 1) Circuit break resistance 2) Short circuit resistance 3) Other circuit-replacing resistance 4) Prying and cutting resistance 5) Remove the sensor 6) Cut the spring wire Product use 1. Product installation: Remove the adhesive tap, fix on the exhibition counter (or fix the product with screws) 2. Cell phone installation: Remove the adhesive tap, paste cell phone 3. Alarm indicator:Use the remote control to send signal to the host,press lock, and the host indicator light turn red, namely the alarm indicator. 4. Alarm solution: When alarm, use remote control to send signal to host, press unlock, namely solution 5. Alarm test: using remote control to send signal to host, press lock, and the host indicator light turn red, then press test to alarm test. Press unlock to finish alarm test.
Item specifics Material: alloy+ABS function: alarm and charging operation: remote control use: security display devices suitable for: 9", 10", 11" and 12" tablets or bigger tablets. Packaging Details Unit Type: piece Package Weight: 5.00kg Package Size: 16.00cm x 10.00cm x 14.00cm (skype ID:7Karen_Li, www.alarmstand.com, WhatsApp / Mobile / WeChat / imo / LINE / Viber:+8613556776136) (Email: karen@holderprotection.com) Features: 1)Mobile phone Security display holder with alarm function 2)With sticker connecting the samples which effectively prevent showing products from being stolen in exhibition, supermarket and shops, 3)Allowing customers to take the sample on hands and try it freely 4)Mainly designed for secure displays of live merchandises like mobile phones, cameras, mp3/mp4, PDA, GPS, ang other valuable product 5)Secure&neat displays of merchandises, interactions between consumers and merchandises are realized with this product,thus better promote sales of open merchandises. The security alarm display holder will alarm in following conditions: 1) Circuit break resistance 2) Short circuit resistance 3) Other circuit-replacing resistance 4) Prying and cutting resistance 5) Remove the sensor 6) Cut the spring wire Product use 1. Product installation: Remove the adhesive tap, fix on the exhibition counter (or fix the product with screws) 2. Cell phone installation: Remove the adhesive tap, paste cell phone 3. Alarm indicator:Use the remote control to send signal to the host,press lock, and the host indicator light turn red, namely the alarm indicator. 4. Alarm solution: When alarm, use remote control to send signal to host, press unlock, namely solution 5. Alarm test: using remote control to send signal to host, press lock, and the host indicator light turn red, then press test to alarm test. Press unlock to finish alarm test.
ZG-D6CMH Alarming Camera Display Stands With alarm function, this ZG-D6CMH is mainly designed for High-Theft Solutions of open merchandises such as SLR or camera or camcorder, and etc.. Secure & neat displays of these merchandises, interactions between consumers and merchandises are also realized with this product. And thus better promote sales of open merchandises. Technical parameters: 1) With alarm function 2) 13cm (standard) or customize 3) Aluminous stand, Metal stand, Remote control. When the exhibit is separate from the sensor, or the sensor is separate from the stand, or the sensor is cut, or the stand is separate from the table, it will alarm immediately. 4) Retractor (pull box) inside the stand 5) Inbuilt battery type: 3.6V/ER14250 6) Exterior power adapter: DC-6V 7) Maximum battery standby: 1 year 8) Alarm volume: 85-105DB 9) Alarm indication: red LED light twinkling 10) Tamper indication: green LED light twinkling 11) Low battery indication: red LED twinkling with a "beep" given 12) Turn on / off alarm: sound & light indication 13) Alarm switch: Remote control. 14) Adhesive base: T-shaped metal mounting base. (If required, please make statement before ordering) 15) Shell material: ABS & aluminous stand. 36 sets per carton.
Zg-d6a1-w secure merchandise displays With alarm function, this zg-d6a1-w is mainly designed for high-theft solutions of open merchandises such as mobile, mp3/mp4, pda, gps, and etc.. Secure & neat displays of these merchandises, interactions between consumers and merchandises are also realized with this product. And thus better promote sales of open merchandises. Technical parameters: 1) with alarm function 2) 13cm (standard) or customize 3) abs stand, use for mobile, mp3/mp4, pda, gps, and etc.. When the exhibit is separate from the sensor, or the sensor is separate from the stand, or the sensor is cut, or the stand is separate from the table, it will alarm immediately. 4) retractor (pull box) inside the stand 5) inbuilt battery type: 3.6v/er14250 6) exterior power adapter: dc-6v 7) maximum battery standby: 1 year 8) alarm volume: 85-105db 9) alarm indication: red led light twinkling 10) tamper indication: green led light twinkling 11) low battery indication: red led twinkling with a "beep" given 12) turn on / off alarm: sound & light indication 13) alarm switch: key (standard) (if remote control is required, please make statement before ordering. Thus we can pre-design it for you!) 14) adhesive base: t-shaped metal mounting base. (if required, please make statement before ordering) 15) shell material: abs stand. 36 sets per carton.
Item specifics Material: ABS + acrylic function: alarm and charging operation: remote control use: security display devices Packaging Details Unit Type: piece Package Weight: 4.00kg Package Size: 11.00cm x 7.00cm x 13.00cm (skype ID:7Karen_Li, www.alarmstand.com, WhatsApp / Mobile / WeChat / imo / LINE / Viber:+8613556776136) (Email: karen@holderprotection.com) Features: 1)Mobile phone Security display holder with alarm function 2)With sticker connecting the samples which effectively prevent showing products from being stolen in exhibition, supermarket and shops, 3)Allowing customers to take the sample on hands and try it freely 4)Mainly designed for secure displays of live merchandises like mobile phones, cameras, mp3/mp4, PDA, GPS, ang other valuable product 5)Secure&neat displays of merchandises, interactions between consumers and merchandises are realized with this product,thus better promote sales of open merchandises. Product use 1. Product installation: Remove the adhesive tap, fix on the exhibition counter (or fix the product with screws) 2. Cell phone installation: Remove the adhesive tap, paste cell phone 3. Alarm indicator:Use the remote control to send signal to the host,press lock, and the host indicator light turn red, namely the alarm indicator. 4. Alarm solution: When alarm, use remote control to send signal to host, press unlock, namely solution 5. Alarm test: using remote control to send signal to host, press lock, and the host indicator light turn red, then press test to alarm test. Press unlock to finish alarm test.
Packaging Details Unit Type: piece Package Weight: 0.00kg Package Size: 0.00cm x 0.00cm x 0.00cm (skype ID:7Karen_Li, www.alarmstand.com, WhatsApp / Mobile / WeChat / imo / LINE / Viber:+8613556776136) (Email: karen@holderprotection.com) Alarming Mobile Phone anti-theft display holder Mobile security alarm display holder Charging and security alarm Rechargeable Mobile Phone Burglar Alarm Display Holder with Remote Control High Quality and Security Tablet PC Alarm Display stand with Charging Hot sale charging anti-theft shop exhibition display security mobile phone alarm holder Rotatable Design Universal Secure Display Cradle Stands For Cellular Phone Interactive Universal Display For Cell Phone security locking Devices mobile phone retail security display system Mobile Phone Anti Theft Alarm Interactive Universal Display For Mobile Phone security locking stands Mobile security alarm display Stand Mobile security alarm display Charging and anti-theft Security anti-theft display holder Charging and security alarm smart phone Features: 1)Mobile phone Security display holder with alarm function 2)With sticker connecting the samples which effectively prevent showing products from being stolen in exhibition, supermarket and shops, 3)Allowing customers to take the sample on hands and try it freely 4)Mainly designed for secure displays of live merchandises like mobile phones, cameras, mp3/mp4, PDA, GPS, ang other valuable product 5)Secure&neat displays of merchandises, interactions between consumers and merchandises are realized with this product,thus better promote sales of open merchandises. Alarm and charging for phone/tablet, floor stand Material: Alloy + ABS Optional Colors: silver, golden Optional charging cables: Micro cable, lightning cable, USB type C cable Size: 65*46*79mm Product use 1. Product installation: Remove the double-face adhesive tap, fix on the exhibition counter (or fix the product with screws) 2. Cell phone installation: Remove the double-face adhesive tap, paste cell phone 3. Alarm indicator:Use the remote control to send signal to the host,press lock, and the host indicator light turn red, namely the alarm indicator. 4. Alarm solution: When alarm, use remote control to send signal to host, press unlock, namely solution 5. Alarm test: using remote control to send signal to host, press lock, and the host indicator light turn red, then press test to alarm test. Press unlock to finish alarm test.
