Silicone rubber sheet for acf bonding or cushion sheet. High thermal conductivity and high performance
From low price to high price according to requirements.
Normal thickness is 0.2mmt ~ 0.5mmt with 1450mm width
Cushion sheet and release sheet and acf bonding of olb, cof, fog for lcd/tsp
Depends on quantity, use hard paper carton or wooden packing
We are scrap yard in Poland which specialize in dismantling transformers. We would like interest you with our crgo,hrgo 0,27-0,35mm sheets from used transfomers.
We can provide wholesale silicone sheets from used big transfomers. Please let me know if you are interested then I will send you our stock.
SILICON WAFERS are the building blocks of modern technology, they provide the substrate onto which circuits are constructed. We offer Prime, Test, Monitor, SEMI standard, and customized silicon wafers in all diameters from 2�¢?�³ to 300mm. Our Wafers meet the SEMI standards, along with customized options.
Silicon On Insulator (SOI) Wafers: Chips fabricated on SOI wafers achieve 30% faster speeds and 80% lower power demands compared to CMOS devices. The SOI structure consists of three layers: a top active device layer for transistor fabrication, a buried oxide (BOX) insulator layer, and a bottom handle wafer layer.
Silicon Float Zone Wafers: is a crystal growth technique that produces highly pure silicon wafers with fewer impurities than traditional methods.
Silicon Thermal Oxide Wafers: Has high quality silicon thermal oxide wafers in all diameters from 2�¢?�³ to 300mm.
Silicon Nitride Wafers: Has different option of film processing for your silicon needs, including LPCVD nitride.
On Insulator (SOI): Has high quality silicon thermal oxide wafers in all diameters from 2�¢?�³ to 300mm.
Fused Silica Wafers: is the amorphous phase of quartz (SiO2).
Borofloat 33 Glass Wafers: is used in a wide range of applications like micro-optics, sensors, microlithography, semiconductor engineering, lighting, medical technology.
Solid Silicone Sheet/ Silicone Rubber Sheet materials are inventoried by Seashore Manufacturing Limited from 0.5mm to 20mm thick and 30 to 70 durometer(hardness) Shore A.
Our Solid silicone sheeting continues to grow and is available in four standard colours white, translucent, red oxide and black.
The dimensions for silicon rubber sheet of our stock stardard is in the following:
1000mmx10mx from 1mm to 20mm
1200mmx10mx from 1mm to 20mm
1500mmx10mx from 1mm to 5mm
1800mmx10mx from 1mm to 5mm
2000mmx10mx from 1mm to 5mm
The specification of most standard silicone sheet we produce are as below:
Density:1.25 g/cm3
Handness:55 Shore A
Tensile strength:7.0 mpa
Elongation at Breakage:320%
Tension Set:8%
Tear Strength:20 KN/M
Heat Resistant: 200 C
Sizes Thinkness tolerance(+/-mm)
10mx1m or 1.2mx1mm 0.1
10mx1m or 1.2mx2 to 6mm 0.2
10mx1m or 1.2mx7 to 10mm 0.3
The above is silicone rubber sheet standard at Shore A Hardness 40,50,60. Other sizes, colours and hardnesses are available on request.
Beside standard ones,we supply FDA food grade silicone sheet,anti-static silicone sheet,anti-acid silicone sheet.
Special silicone sheet is use of wood/chipboard laminating,glass industrial,solar industrial.
Our Solid silicone rubber sheet is 200 degree centigrade temperature resistant as standard,but we also can do high temperature resistant up to 270 degree centigrade.
Sponge Silicone Rubber Sheet
100% closed cell Silicone Rubber material,double sides fabric impression or smooth finished.
Our sponge silicone sheeting is available in four standard colours white, red oxide,black.
The dimensions for sponge silicon rubber sheet of our stock stardard is in the following:
1000mmx1000mx from 3mm to 20mm
2000mmx1000mx from 3mm to 20mm
5000mmx1000mx from 3mm to 20mm
The above is sponge silicone sheet standard at Shore A Hardness 10,20,30. Other sizes, colours and hardnesses are available on request.
Our sponge silicone rubber sheet is 200 degree centigrade temperature resistant as standard.
Sponge silicon rubber sheet material is readily fabricated into gaskets and cushioning pads.
Honeywon»s silicone sponge is with high grade silicone rubber material and inimitable technique, with
Good character of high temperature resistant, aging resistant, ozone resistant, insulation property, fuel
Oil resistance, lubes resistance, no smell and wear well. High compressibility and low compression set
Over a wide temperature range, and good acoustic and thermal insulation properties. Apply to -50µ
~+200µ protect and heat insulation for long term continuous use and -70µ ~ +260µ for intermittent
Use on all kinds of machine.
Special size(mm)+minimum length:no limitation maximum length:no limitation, or in roll
Minimum width:no limitation maximum width:1200 minimum thickness:3.0 maximum
Thickness:30.0
Product color+ red¼grey¼natural, white¼black or any other required color
Application+ heat transfer print equipment, electronics and electrics, machine and sealcharacter+high temperature resistant, aging resistant, ozone resistant, insulation property, fuel oil
Resistance, lubes resistance, no smell and wear well, good acoustic and thermal insulation properties.
+ technical index¦
Style¦ open cell
Surface¦double fabric impression
Tear strength¦55kn/m
Press strength+30mpa
Elongation¦100%
Hardness¦8-50 shore a
Temperature range¦-50-220c continuously; -70µ ~ +260µ for intermittent use
Density¦0.55-0.9g/cm3
Flame resistance¦94v-0
Dielectric breakdown voltage¦>3kv
Dielectric constant¦5.5 khz
Tensile strength: 10-30psi
Volume resistance¦1.*1011 ohm-m
Thermal conductivity¦0.1 w/m-k
Thick tolerance: a0.05mm~0.1mm
Specification(sheets or rolls):
A. Sheets: 500*500*0.7-1mm
B. Sheets or rolls: 500*1.5mm above
C. Sheets or rolls: 1000*2mm above
D. Sheets or rolls: 914.4*2mm above
E. Sheets or rolls: 1200*2mm above.
F. Sheets or rolls: 1500*2mm to 10mm
Conforms to the national profession standard: hg/t2949
