It is solid under room temperature and easy to be handled , usually used as cusion on the surface of heat -eliminating sheet or other components .It gets soft under the operating temperature ,so it can be perfect stuff and minimise the heat between the power -consuming electronic parts and thermal conducting sheets, perfects the performance of the thermal conducting sheets, improves the aliability of CPU ,DC/DC transformer.
Phase Change Materials(PCM)--------- To many thermal management engineers, Laird Tgard K52 and Bergquist Hi-Flow 300P are highly reliable, no matter the thermal performance, or electrical properties. domestic suppliers offered phase change materials too, but the problem is that most of PCM lacks of electrical insulation.GLPOLY is the only one released a phase change of XK-C16 with excellent thermal performance and electrical insulation. One customer applied a Laird Tgard K52 phase change materials to power supply, now they wanted to use a local PCM replacing Tgard K52 because of pressure of high cost. But they had tested many local products and found that all samples were unqualified. Power supply applications require excellent thermal performance and electrical insulation at the same time. GLPOLY is practical and realistic about performance of PCM, all parameters are consistent with performance, of course, test result will be the best proof. The end products will be sold in America, there is strict regulations there about electronic products, test must be rigorous too. Testing lasted for six months and test results satisfied customers requirement. Both GLPOLY XK-C16 PCM and Laird Tgard K52 have a thermal conductivity of 1.6W/mK, but XK-C16 provided a much lower thermal impedance of 0.23in2/W, it was two thirds of that of Laird Tgard K52, more important is XK-C16 phase change material offered excellent electrical properties for a withstand voltage of 3.5kV. GLPOLY XK-C16 was the only one that met customers application requirement. GLPOLY XK-C16 is a kapton reinforced, high performance, electrical insulation phase change material. When temperature rises beyond phase change temperature, it will soften or liquify and fill intricate voids and gaps fully. When temperature decreases, the liquid material will form into sheet for ease of maintenance or repair. If you can not find appropriate thermal management material , please come to GLPOLY, GLPOLY will design a pioneer and efficient thermal management solution for you to keep your devices performing stable.
Supplier: Thermal interface material , thermal conductive silicone rubber pads , thermal grease , thermal insulator , phase change material , thermal tap gap filler , liquid gel filling gap
Services: Manufacturer
Supplier: Products e.g. ice pack, cooler and insulation refrigerated box, cabormer, phase change materials
Services: Manufacturer
Supplier: Thermal conductive materials and thermal management solutions new energy vehicle : lightweight thermal conductivity pad, adhesive gel,structural adhesive gel, power battery , motor, electric control, charging pile, special materials for energy storage and heat conduction 5g telecom application materials : high thermal conductivity pad and gel, emi absorbing material, phase change material industrial electronics : thermal gel pad, insulation material, adhesive tape non silicon thermal conductive materials
Name: terminal block for single phase or three phase electricity meter Material: PBT+Fiberglass, PC+fiberglass Can be customized
Name: terminal block for single phase or three phase electricity meter Material: PBT+Fiberglass, PC+fiberglass Can be customized
6-35kv medium vollage power cable selection with cross-linked polyethylene insulation and plastic Sheath material, insulation layer USES the three co-extrusion technology, full automatic Change control. Such products, aging resistance, corrosion resistance, environmental stress not only electricity Gas properties and good mechanical properties, and has a simple structure and outer diameter Small, light weight, easy to use and elaborate divide not restricted, Public places such as crowed, place closed space.
A cable earthing connection box (Link Box) is a critical part of high-voltage underground cable systems.. Firstly, a Link Box provides a sealed, weatherproof enclosure for bonding cable earths at what is the weakest point in the system cable joints and terminations.Link boxes are used with cable joints and terminations to provide easy access to shield breaks for test purposes and to limit voltage building up on the sheath. Lightning, fault currents and switching operations can cause over voltages on the cable sheath. We also deal in distribution and control Pane box and We make customized as per the customer specification, Electrical Enclosure Type High Voltage (HV) Ingress Protection IP66, IP67. Material Stainless Steel Enclosure. Ambient Temperature Rating 20 C to +55 C. Maximum Number Of HV Cable Terminations 3 conductors per phase in & 3 conductors per phase out. Electrical Enclosure Type High Voltage (HV) Ingress Protection IP66, IP67 Material Stainless Steel Enclosure Ambient Temperature Rating 20C to +55C Maximum Number Of HV Cable Terminations 3 conductors per phase in & 3 conductors per phase out Number Of HV Cable Gland Plates 2,3,4 Suitable for 3.3kV, 6.6kV, 8.3kV, 11 kV Connector Size 6sqmm to 630sqmm Earthing Via studs on enclosure, door and gland plates Mounting Via 3mm thick external mounting straps, slotted upper strap for ease of installation Standard: -20 to +40C (-4 to 104F) Option: -50 to +65C (-58 to 149F)
System voltage 415 V +/- 10%, 3 Phase, 4 wire AC 2. Frequency 50 Hz +/- 3% 3. Fault level Shall be designed for fault level of 50 KA for 1 sec 4. Grounding Solidly grounded neutral system 5. Insulation level a) Power circuit b) Control circuit 2.5 KV / 1 minute 1.5 KV / 1 minute 6. Main bus bars Shall be designed to carry continuous current rating of 1.2 times of incomer ACB unitâ??s continuous current rating and STC of 50 kA for 1 sec. Temperature rise, short circuit design shall be as per IS 8623. Max. Current density for the material of bus bar shall be as follows: Copper: 1.6 Amp/Sq.mm Aluminum: 0.8 Amp/Sq.mm (For Sl. No. 12 PCC)
