The parameters of the gypsum board production line are as follows: 1) Production capacity: 2 million ~20 million square meter per year. 2) Final product variety: common paper-covered, plasterboard fire resistance, paper-covered plasterboard, water resistance paper-covered plasterboard. 3) Product specification: thickness from 7mm ~ 15mm, length from 2400mm ~ 3000mm, width from 1200mm ~1220mm 4) Product quality: in conformity with standard of P.R.C gb/t9775-2008 paper-covered plasterboard. Wooden case packing /20 'container / 40 'container.
Paper gypsum board production line is the equipment which produces new building materials--paper gypsum board.Its production process is:ripe gypsum, water and all kind of ingredients that automatically precision measurement, by the continuous, automatic transmission system into the mixture into a homegeneous slurry spred to the continuous movement forward in the gypsum board surface of the paper, in advance process, after shock, the slurry was complete encapsulation of paper from top to bottom.And squeezed into the very rules slab, the slab continuous production line in the strict control of the speed and speed and stability to continue to move forward gradually formed a certain itensity, and shape the rules of wet gypsum board, the cut precision control system set by the precise cut into veneer.Veneer orderd by the control system topology, turning it over into the dryer.The drying temperature is strictly controlled, the board absorbed water lost to evaporation.Plate from the dryer, and advance the process of gradually cooling down the production line.After turns hostile every two stiff surface to fold once more gathers, saws after the reason the board both sides shuts off the regular size, transmits to the automatic hay stacker, piles up the end product waregousing.This prouduction line mainly by three major part is composed, namely.Material room, heating system, integral unit.
Supplier: Non - asbestos corrugated roofing sheet, cement, roofing tiles, colored roofing tiles
Services: Counseling and consultancy
Buyer: Concrete mixture
Supplier: Metal Roofing Panels
Buyer: Painted Matt Black 24 Gage Steel Coil 20 Wide And 4x10 Flat Sheets
Supplier: Gypsum powder production line, gypsum board production line, gypsum board lamination machine, gypsum board, PVC gypsum board, nail making machine
Supplier: Desulfurization gypsum plant, phosphogysum plant, lemon gypsum plant, fluorine gypsum plant, gypsum board plant, gypsum block plant, gypsum powder plant, painted gypsum plant, gypsum board pvc laminating machine, paper faced gypsum board plant, paper free gypsum board plant, high strength gypsum powder plant, gypsum cornice plant, gypsum paper faced cornice plant
Supplier: Gypsum board production line, gypsum board production line, machine tools, construction machine.
The paper faced gypsum board production line is the professional equipment for producing the new decorated material. The principal working process are as follows: first, we take certain amount of hemihydrate gypsum powder, water and other additives, through the automatic measurement device and automatic conveying system, they will be conveyed into the mixer and changed into the gypsum slurry which will be scattered on continuous moving faced paper evenly. Second, at the same time, with the continuous moving and vibrating, the slurry will gradually diffuse and even scattered. Then the slurry will go into the forming machine and compound with the top and bottom faced paper. By the process of extruding and forming, the slurry will be encased by the faced paper and the continuous pulpous gypsum boards are formed. Third, In the forming line, the wet solid paper faced gypsum board will be gradually formed after the process of recondition, natural coagulating, automatic cutting, etc. The wet board will be arranged according to the programmed control system. With the help of rollers, belt conveyer and overturner, they will quickly enter into the dryer. Fourth, the board will be strictly controlled in the separate temperature zone of the dryer. After blowing into different thermal hot air, the moisture of the wet board will be evaporated. Because of the reaction of the starch, the board will be attached to the faced paper, and then the dry gypsum board will form and exit from the dryer. Moreover, after passing though overtuner and the folding device (the front side is inside) for the second time, the board will be cut into certain specification by saw. Finally, the finished gypsum board will be conveyed to the automatic sealing device and the stacker. After the stacking, the board will be transported to the finished products warehouse by the forklift. 40 feet container for transportation.
1. PVC film lamination machine Usage and Characteristics The lamination machine is used to paste the decorative film and boards together. First, put the board on the rollers. After the dust collection process, coat the glue on the boards, the glue will be qualitatived after conveying on the guide rollers. Then it will be combined with the film and enters into the recombination mechanism. After passing and cyclic rolling of the two lines of press roller, pinch roller and forming roller, the recombination is finished. The machine is fit for the surface decorative materials, such as pasted and compound decorative film and decorative paper, etc of the PVC baseboard, profile, low foaming board and wood board, etc. Specification: Max lamination width: 1300mm Max lamination speed:2-15m/min The thickness of the laminated board: 2-50mm Transmit power: 4.50kw Power: 380V,50HZ(can be made according to the inquiry) Size: 12600*1950*1600. 2. aluminum film lamination machine Usage and Characteristics The lamination machine is used to paste the decorative film and boards together. First, put the board on the rollers. After the dust collection process, coat the glue on the boards, the glue will be qualitatived after conveying on the guide rollers. Then it will be combined with the film and enters into the recombination mechanism. After passing and cyclic rolling of the two lines of press roller, pinch roller and forming roller, the recombination is finished. The machine is fit for the surface decorative materials, such as pasted and compound decorative film and decorative paper, etc of the PVC baseboard, profile, low foaming board and wood board, etc. Specification: Max lamination width: 1300mm Max lamination speed:2-15m/min The thickness of the laminated board: 2-50mm Transmit power: 4.50kw Power: 380V,50HZ(can be made according to the inquiry) Size: 12600*1950*1600. It uses 40 feet containers to transport.