Thermal CTP from CXK has fowllo features:
1)Superior: Used superior CTP specialized substrate.High sensitive,high resolution and rich tone.
2)Convenient:Okay to work under day light.Wide latitude achieved.
3)Stable:Fully automatic production and temperature controlling equipment,strictly quality supervised,plate consistency then secured.
4)Competitive:Speedy exposure process,pre-heated free,quick in-water balance,less water and paper waste,long run plate.
5)Compatible:Can be used in external Drum,internal Drum and Flat-bed plate setter.
plate-plastic cover-carton box(wooden stick edges)-wooden pallet-hard carton cover-plastic cover.
Plate type: taiyang thermal positive ctp plate Substrate: electro-chemically grained and anodized aluminum Gauge: 0.15mm, 0.25mm, 0.3mm Alloy: standard 1050 alloy Spectral sensitivity: 830nm Sensitivity: 120-140mj/cm2 Resolution: dot reproduction 1%-99% at 200lpi Coating color: blue Thermal platesetters: 830nm laser ctp platesetter Accredited developers: taiyang developer, kodak developer and agfa developer. Processing: Newly produced developer can be used for 35 seconds at 23 degree. With the aging of developer, developing temperature is raised, but better not extend developing time. For newly produced developer, it can have shorter developing time with higher temperature, such as 25 degree for 30 seconds, but better not higher than 30 degree. Baking: 230 degree for 2-5 minutes Run length: unbaked over 50, 000 Baked over 200, 000 Shelf life: 12 months Storage and handling: 10 ~ 30 degree, hold humidity below 65%. Do not store for more than 12 months. Being transported, with light transportation release, crash, break, and fall. Carton or pallet. Export standard packaging.
Artyong thermal 830 ctp, the advanced thermal ctp plate with great compatibility is specially designed for making plates in various platesetters, suitable for newspaper and commercial printing. Together with the great compatibilities, there are friendly plate-making, faster adaptations and more chemical alternatives. It will truly save your operation time as well as your plate cost. Artyong thermal 830 ctp, it needs less adjustment than the other thermal ctp plates that you are using now. By checking few factors and adjusting the linearity, you can use the artyong thermal 830 ctp with your existing systems freely. If you are tired of dealing with the sole supplier on pricing, service or stock issues, or you are not satisfied of being constrained by the vendors bundling strategy, why don't you just replace them by an advanced new plate? artyoong thermal 830 ctp will not only bring you freedom but also push you to move forward faster than ever. Artyong thermal 830 ctp, the new technology applied to the artyong thermal 830 ctp will generate the fine resolution as well as the good reproduction through various plate-setters. Moreover, the great cost-saving by using artyong thermal 830 ctp will advance you more room to compete against other competitors in both quality and pricing. You will enjoy the new experience...Gain more, pay less! Aluminum Thickness:0.15 , 0.20 , 0.25 , 0.30 , 0.40 (mm)( 0.20 & 0.40 only for quantity orders) Exposure Light source: infrared diode laser Exposure energy: 100 ~ 120( mj/c ) Dot reproductive range: 1~99 ( % ) ( at 450lpi ) Wavelength peak output: 800~850 ( nm ) (peak : 830m) Processing Developer: max dp-2 Replenisher: max dp-2r Processing temperature: 24í= 1 () Processing time: 30 (secs) Replenishment rate: 90 ( ml/ ) Working environment: daylight Press room Run length (normal status) baking condition Unbaked: 150000 impressions Baked: above 1000000 impressions Static: 5 minutes at 240
Gauge : 0.15/0.20/0.25/0.30/0.40mm Spectral sensitivity:830nm Exposure energy : 100~110 mJ/cm² Resolution: 1-99%@300 lpi Run length: 50,000 unbaked Recommended processing condition: Temperature: 24±1C, Speed:20-40s Safelights: Daylight Guarantee Period : 24 months under recommended storage conditions Packaging Details 0.15mm 100 pieces/carton 0.30mm 50 pieces/ carton 0.40mm 30 pieces/ carton Then 60 packages or 1.6 meters high on a pallet. One 20ft container can contain 30,000sqms. Shipping 1. Samples available, we often send 4-8 pieces plates to customers for testing. 2. Sizes of plates can be produced according to customers' demands. 3. We supply online technical support. If there is any problem, we will coordinate our engineers to help you solve the problem via e-mail/Tel/Video 4. We have a tracking service every month to care about our products, if any problem, we will help you and learn from you together to solve the problem.
Thermal CTP printing Plate Product Description Thermal CTP Plate TP-II 0.3mm is our self-developed high-quality printing plate specialized in thermal CTP platesetter. It is directly scanned by 830nm laser controlled by computer and put on press for printing after developing. The formulation designed by our own intellectual property and the unique manufacturing process. Model: TP-II Type: Positive 1. Thickness of aluminum base: 0.30mm 2. Application: High-quality commercial color printing 3. Specification: Sensitivity: 120-140mj/cm�²; Dot reproduction: 1-99% (200lpi); Safe operation in fluorescent light: 8 hours; Run length before baking: more than 100,000; after baking: 200,000+ 4. Recommended platesetter: Infrared laser thermal platesetter with 830nm 5.Storage and Unpacking a) Light and heat can cause the thermal CTP plate to chemical change easily; Recommended condition Temp: 15-26 centigrade, RH less than 65%. b) Unpacking the outer package should be in yellow light or room light; the recommended plate-making room light should be yellow. c) Carrying plate gently; avoiding striking, folding and falling. d) Palletizing height: less than 1.2m. 7. Guarantee Period 12 months under above recommended storage condition Product Feature a) Unique formation design The sensitive layer is a unique formulation structure and it makes the dot edge which is formed with laser scanning more sharp and suitable for high-end commercial color printing. b) High-quality substrate Fine aluminum plate with complex grain construction, dense oxidized layer as its substrate. Not only ensures the adhesion of the thermal coating to the aluminum plate, but also makes the plate possessing excellent runlength and exact dot reproduction to guarantee high quality printing. c) Convenient bright room operation Imaged and processed under room-light condition without additional dark room, easier and more comfortable to operators. d) Outstanding platesetter compatibility Compatible with various thermal CTP platesetters available in current market
HAOMEI is a professional manufacturer of Conventinal PS Plates, UV-CTP(CTcP) Plates and Thermal CTP Plates in China. HAOMEI brand printing plates are popular in mainland and oversea, widly used in prining market like newspaper, commercial print, etc. Thermal CTP plate is a high-quality printing plate specialized for thermal CTP platesetter. It is directly scanned by 830nm laser controlled by computer, and after suitably processed, such as developed etc, put on press for printing. The use of thermal CTP plate can make you omit conventional printing film and related film making procedures; it not only shortens platemaking time but minimizes mistake chance as in order to guarantee image exact reproduction. Thermal CTP Plate Technical Parameter: Product Type Thermal CTP Plate Application Type Commercial Printing,Newspaper Printing and Light Printing Plate Features Stable Quality, Good Compatibility,Fast sensitive speed, Excellent dot reappearance, Long Run Length Compatible Platesetter Kodak,Agfa,SCREEN,CREO,Heidelberg,CRON,KBA.Etc. Aluminum Substrate North China Aluminum Group, Mingtai Aluminum Group Plate Thickness 0.14~0.40mm Maximum Coil Width1500mm Spectral Sensitivity 830nm Exposure Energy 110-130mj/cm2 Developing Temperature 23~25°C Developing Time 25-30Secs Safelight 2 hours under white light Resolution 80,000 copies unbaked(Actually run length may vary according to printing machine, ink paper condition) Shelf Life 18 months Storage Conditions The recommended storage condition are 10~25°C, with 40%-60% humidity Away from sunlight radiations&direct sunlight, Anti-humidity, Anti-acid, Pack height no more than 1.5 meters.
Thermal CtP plates of 0.28 mm in various sizes.
Polyester offset ctp plates for mini offset printing machine for long run printing Legal, a3 and custom build size
¿ï first class aluminum substrate The first class aluminum base of ronseiní»s ctcp plate maintains an even surface, exact dimension and all kinds of physics and mechanical capabilities. ¿ï compound halftone frame and close-grained oxidation layer The multi-layer compound halftone frame and close-grained oxidation layer on the surface ensures exact dot-reproduction and excellent endurance. ¿ï hydrophilic managing substrate Uv-ctcp plate adopt hydrophilic managed substrate to not only ensure the firm combination between sensitive layer and substrate but also improve the balance between water and ink so that it prevent from scum when machine idle and during printing. ¿ï excellent coating component Uv-ctcp plate adopts excellent coating component to keep the plate well-proportioned coated, with high sensitive speed, fine dot-reproduction and long run length. These make ronsein ctcp plate fit for top grade commercial printing and newspaper printing.
Taiyang Coating solutions for CTP plate Viscosity: 1.3-10 c.p. Solid content: 8-15% Coating thickness gauge: 1.55-1.60g/m2 (On the PVPA well-treated Al substrate) Packging: Black PP or PE plastic barrels, 20kg Coating performance Coating temperature: 20-30 degree Coating condition: clean, non-blue or non-white defect Develping conditions Developing temperature: 23-28 degree Developer: Taiyang developer, Kodak developer or Agfa developer Developing time: 25-40 seconds Shelf life: 6 months Storage and handling: Liquid should be sealed stored at 5-25 degree, far away frrom heat and fire. Black PP or PE plastic barrel.