Technical Data:
1.Working pressure- 1.6 Mpa.
2.Material- Brass, Steel.
3.Handle- Long steel handle.
4.Body- Brass.
5.Handle nut- Brass.
6.Structure- Ball.
Sizes available- 1/2", 3/4", 1ö.
Weight- 170 Gms, 250 Gms, 370 Gms.
Packing- Standard.
MATIREAL - CAST IRON / CAST STEEL / STAINLESS STEEL 304/316/316L / WCB BALL - STAINLESS STEEL 304 / 316//316L STEAM - STAINLESS STEEL 304/316 GLAND NUT - 304 / 316 STAINLESS STEEL SEAT - PTFE/CTFE/GTFE SIZE - 1/4 INCH TO 4 INCH
MATIREAL - CAST IRON / CAST STEEL / STAINLESS STEEL 304/316/316L / WCB BALL - STAINLESS STEEL 304 / 316//316L STEAM - STAINLESS STEEL 304/316 GLAND NUT - 304 / 316 STAINLESS STEEL STUD NUT - STAINLESS STEEL 304 SEAT - PTFE/CTFE/GTFE
MATERIAL - CAST IRON / CAST STEEL / WCB / STAINLESS STEEL 3O4/316/316L BALL - STAINLESS STEEL 304 / 316 STEAM - STAINLESS STEEL 304/316/ GLAND NUT - STAINLESS STEEL 304/316 LEVER - STAINLESS STEEL 304 SEAT - PTFE / CTFE / GTFE STUD NUT - STAINLEES STEEL 304
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option