Model
LSC-120
Battery Voltage
12V
Charging End Voltage
4.4V / 14.1V
Maximum PV Panel Open Circuit
25V
Maximum PV Panel Short Circuit
25A
Continuous Load / Charge Current
20A
No Load Current (No Load and PV)
10mA
Low Voltage Disconnect
11.5 ü} 0.1V
LVD Reconnect
12.5 ü} 0.1V
Temperature Compensation
-0.025V / ¯C
Dimension (L x W x H)
134.2mm * 58.4mm * 33mm
Weight
200g
24-48V Solar Charge Controller PWM series PWM-40248 Technical parameters: 24V/48V Automatic switch, with digital display. Max charge/discharge current:40A Full chagre cut: 33V/66V default low voltage cut: 22V/33V default low voltage restore: 25.2V/50.4V default static current: =45mA voltage drop:
Supplier: Solar charger controller
MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging. LCD display , easy to operate on LCD screen Multi stage charging (3-stage charging , parallel charging and equalized charging function) BTS - Battery remote temperature sensor terminalEnable to charge Li-thium, Gel , lead-acid battery With RS485 & USB communication port Protection: PV array short circuit, PV reverse polarity, Battery reverse polarity, Over charging, Output short circuit
Supplier: Solar Charger Controller
MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging. LCD display , easy to operate on LCD screen Multi stage charging (3-stage charging , parallel charging and equalized charging function) BTS - Battery remote temperature sensor terminal Enable to charge Li-thium, Gel , lead-acid battery With RS485 & USB communication port Protection: PV array short circuit, PV reverse polarity, Battery reverse polarity, Over charging, Output short circuit
In additional to solar panel and converter; system integrated controller & inverter, simply connect the solar panels and batteries to the system, the system can work, easy for use the inverter frequency structure ( transformers ), controller is pwm. >20kg, carton
Supplier: Solar and electronics products, such as wireless chargers, solar chargers, USB chargers, solar road stud, solar controllers
This product is a multifunctional solar emergency with high capacity built-in lithium battery of, and it can charge your mobile phone, digital camera, PDA, Mp3, Mp4 and other digital products at any time and any place.Its design is stylish, small and exquisite, portable, fashionable and elegant. Technical parameters: 1. Contour measurement of the charger: 130, 7815mm, 175 weight 2. Solar panel: 100 x 68 x3 mm, 0.7W, high transfer efficiency poly silicon produced in Taiwan. 3. Max Output: DC5.5V 1500mA 4. Internally installed polymer of high ¨Ccapacity rechargeable lithium battery (Japanese technology of SANYO, Japanese fine fender apronand safe operation), capacity: 5000mAH 5. Charging time of mobile phones: about 60 minutes (different brands and models may vary a little); speaking time is between 100 to 180 minutes or 24 hours of standby time 6. Charging time of the solar energy for built-in battery in the charger: 8-12 hours 7. Charging time of the computer of AC adapter for built-in battery in the charger:6-8hours 8. Five colors could be optional.
Voltage 12V DC Watts 1.5W Voc(open circuit volt) 22.50 VDC Maximum Output 120mA Charger Dimensions 14-3/4¡±L x 6-1/2¡±W x 7/8¡±T Cord Length 91 Inches Net Weight of Charger 0.88KG Carton Box 47X29X21.5cm Quantity/Ctn 5pcs/Ctn Gross Weight/Ctn 6.0kg
