Vipeak Impact Crusher

Characteristics of Vertical Shaft Impact Crusher (Sand Making Machine): Simple structure and low operating cost; High crushing ratio with low consumption; Function of fine crushing and crude grinding Slightly influenced by moisture content of material, and the max moisture content is about 8%; More suitable for crushing mid-hardness and high hardness materials; Cubic shape of final products, high density of piling up and low iron pollution; More wearable and easier maintenance; Low working noise (lower than 75 decibel) and light dust pollution.

Impact crusher is a new type of high-efficiency crushing equipment. This crusher mainly consists of board hammer, impact plate, board hammer pedestal, rotor, and feed port etc. Being simple, reliable and energy-efficient, our impact crusher is one of the most frequently used rock crushers.Impact crusher is widely applied in mining, transportation, energy, construction and chemical industry. They are ideal choice for crushing and screening.This impact crusher features reasonable structure, high productivity, easy operation and maintenance and safe performance.The most outstanding advantage of this machine is that its finished powder is in good, cubic shape and without tensility and cranny. Vipeak impact crusher is ideally suited for breaking materials with a grain size of not more than 300mm and compressive strength of not more than 350 mpa. It can crush materials of all hardness, being an ideal piece of equipment for secondary crushing. Additionally, our impact crusher has obtained u.S. Patent. Impact crusher features and benefits : 1) high reduction ratio and crushing efficiency; 2) no-board connection; the blow bar with high chrome(high chromed blow bar); 3) impact plate with a special shape; 4) crushed product with cubical shape; 5) easy maintenance and reliable operation. Working principle: Impact crusher crushing materials with impact force. When materials enter, crushed due to the high-speed impact of the blow bar and are thrown to the impact plates on the rotor for secondary crush. Then materials will be shot back to the blow bar again for the third crush. Process repeats until the materials

Jaw Crusher is one of the most popular stone-crushing equipments in the world, Jaw Crusher is ideally suitable for primary and secondary crushing. The highest anti-pressure strength of crushed material is 320MPa. It is widely used in mining, metallurgy, construction, highway, railroad, and chemistry industries and etc. Many models are available according to your different fineness requirements. Main structure of Jaw Crusher: Jaw Crusher mainly consists of main frame, eccentric shaft, belt wheel, flying wheel, movable jaw plate, side board, toggle plate, back seat for toggle plate; gap adjusting screw, returning spring, fixed jaw plate, movable jaw plate and so on. The toggle plate also plays the role of protecting. Working Principle of Jaw Crusher: Motor drives belt and belt pulley, makes moving jaw up and down through eccentric shaft. When the moving jaw is up, the angle between lining plate and moving jaw becomes large, and this will push moving jaw plate close to the fixed jaw plate. During this process, the material is crushed and ground, thus the crushing will be done. When the moving jaw is down, the angle between lining plate and moving jaw becomes small, the moving jaw plate will leave the fixed jaw plate on account of the effect of pulling bar and spring, and then the crushed material will be discharged from the lower opening of the crushing room. With the motor continuously rotating and the material periodically crushed and discharged by the crusher, the mass production can be realized.

For higher productivity, better reliability and flexibility, long service life, and better final product quality, the Symons type cone crusher is absolutely your best choice. Symons type cone crusher offer several outstanding features such as excellent tramp release system, unique hydraulic lifting system, high crusher throw and reasonable cavity design, all of these features ensure the Symons type cone crusher can offer the unbeatable performance in secondary, tertiary and quaternary applications. If your aggregate or mining business demands the 24-hours running, high-reduction, big capacity application, you will find the Symons type cone crusher optimized for your demands. The innovations like the stable lubrication, excellent sealing feature, great abrasive material applied in key components and rugged construction effectively reduce the wear rate , extend the replacement period of the spare parts, evidently reduce the production cost in per ton hour material processed. All of these can help you to achieve the highest level of profitability.

Jaw crusher(vipeak) Key worlds: jaw crusher, stone crusher, rock crusher, crushing machine, crusher Crushers from zhengzhou vipeak heavy industry machinery co., ltd can be used in metallurgical industry, mining industry, chemical industry, building material, highway, railway, water industry and etc. They can be used to crush all kinds of mine and other massive materials into the granule, for the secondary crushing and the fine crushing. The highest anti-pressure strength of crushed material is 2000kg/cm2. The size of crushed material should conform to the stipulation in the table of specification. The too sticky material will affect the capacity of the machine. Models available: Pe-400*600jaw crusher Size of feeder opening (mm): 600*400 Max. Feeding size (mm): 350 Capacity( t/h ):15-50 Motor power (kw):37 Overall dimensions (mm): 1700*1732* 1653 Weight (t): 6.8 600*í900 jaw crusher Size of feeder opening (mm): 900*600 Max. Feeding size (mm): 480 Capacity( t/h ): 45-110 Motor power (kw): 75 Overall dimensions (mm): 2290*2206*2370 Weight (t):17 750*1060 jaw crusher Size of feeder opening (mm): 1060*750 Max. Feeding size (mm): 630 Capacity( t/h ): 105-195 Motor power (kw): 110 Overall dimensions (mm): 2655*2302*3110 Weight (t): 29 500*750 jaw crusher Size of feeder opening (mm): 500*750 Max. Feeding size (mm): 425 Capacity( t/h ): 15-65 Motor power (kw):55 Overall dimensions (mm): 2035í1921í2000 Weight (t):12

PF Impact crusher is the most advanced crushing machine combining domestic stone&sand industry specific situation, and it absorbs latest technology. It adopts advanced production technique and unique structure design, final product shape would be cube, max input size of material should be 500mm, compressive strength should be less than 350MPa, all kinds of coarse, medium, and fine size material(granite, limestone and concrete) could be processed. Impact crusher is widely applied in mining, railroad, highway, energy, cement, chemical, construction industries. Final size of material could be adjusted, double chamber and triple chamber types are available, unique structure adopt key-less connection, high chrome hammer, and special impact plate; crushing process is simplified, making it more energy-efficient; Cube final product shape,and adjustable discharge size.

Place of origin: china (mainland) Model number: pf1010 Application: ore Feature: 1.Stable operation, suitable for crushing hard rock with high efficiency and low consumption. 2.All parts are made of wearable material which can extend the lifetime of this machine. 3. Product is cubic shape, high density, adjustable discharge size, simplified crushing process 20gp/40gp/40hq container

Impact stone crusher performance and feature pf series impact crusher has three-crushing chamber, rate of finished products at one time is high, the crushed materials are all cube particle. high-chromium plate hammer, particular impact board liner. the secondary crushing effect can be improved by improving the angle of the back plate. adopted hydraulic opening closing system device ensure the easier replacement of easy wearing parts and convenient maintenance, greatly reduced operating worker's labour intensity. Impact crusher main application Pf series impact crusher is usually used as a secondary or tertiary crushing, especially suitable for these industry, such as, railways, highways, water reservoirs and airports which has strict size of stone. The impact breaker fits for crushing soft mineral&rock materials, whose size is not in excess of 500mm and crushing compressive strength is not more than 350mpa, such as granite, basalt, clay, kaolin, limestone, bauxite clinker, concrete, gypsum, graphite and so on.

Performance Features: 1.Many cavities to crush, suitable for crushing hard rock. 2.Low and big feed opening makes the production line easy to arrange and increases the feeding material size. 3.New anti-abrasive material makes longer service life of blow bar, impact plate and liner plate. 4.High-chromium blow bar and unique impact liner plate are especially suitable for hard rock crushing, high efficiency and energy conservation. 5.Reasonable design of leveling plate making charge finer and cubic without interior cracks. 6.Product shape is cubic and discharge material size can be adjustable. 7.Simplify crushing circuit. 8.Use the hydraumatic to open, easy to maintain and change wear-parts. PF Series Impact Crusher use impact energy to crush materials. When the impact crusher works, the motor drives the rotor of the impact crusher rotate with a high speed. When the materials get into the area which the hammers effect, under the impact function of the hammer at a high speed, materials are thrown to the impact device above the rotor continuously. And then the materials are rebounded from the impact liner to the area where the hammers effects for recrushing, then discharged from the discharge port. Users can adjust the space between Impact Rack and Rotor Support to get the expected size.