ultrasonic generator PCB based on ultrasonic cleaning workpiece, the ultrasonic generator PCB are allowing the particles attached to the workpiece, oil and other mechanical vibration with the ultrasound off or dissolved or emulsified and so on, to achieve the purpose of cleaning the workpiece.
ltrasonic Cleaning Equipment Ultrasonic parts of divided into two parts; one ultrasonic transducer, said ultrasonic vibration (or head); the other is the ultrasonic generator, ultrasonic transducer is the ultrasonic generator is converted to electrical signals provided by the mechanical vibration.
Ultrasonic generator (hereinafter referred to as generator) is actually a power signal generator, it produces a certain frequency sinusoidal (or similar sinusoidal) signals, ultrasonic generator development and is closely related to the development of power electronic devices in general can be divided into tubes, analog transistor. Switching transistor at these stages, the following are described separately.
PCB type Ultrasonic cleaning generator can be used with ultrasonic transducers to make a perfect ultrasonic cleaning.It is more compact, economic and space save design to fit both light duty and heavy duty cleaning system. It is very durable and can be continuously used for mass production even 24 hours operation. The generator can provide a timing feature, power adjustment, and sweep frequency feature.
PCUG - Series: Ultrasonic generator with digital current display and pulse sweep frequency adjustment for industrial cleaning and biodiesel production application. It can directly connect with our "PCUI" immersion transducers pack to form a power cleaning system OR biodiesel reactor to form biodiesel production system General Specification : Input: 120Vac / 220Vac, 50 / 60Hz Output Power: 600W, 900W, 1000, 1200W, 1500W, 1800W Output Frequency: 10KHz to 133KHz Pulse Sweep Frequency : 0 ~ 20Hz Feature : 1) Power Level Control 2) Pulse sweep frequency adjustment to improve cleaning effect. 3) Current Overload protection. 4) Thermal Overload protection. 5) Current indication. 6) Robust design and can be 24 hours continuously operation.
Pwug: ultrasonic welding generator Digital time setting ultrasonic welding generator can be used for plastic welding application. It is so simple and easy connection between generator and transducers. The output power can be 1000w, 1500w, 2200w, 2600w, 3200w and 4200w. The general operating frequency are 15khz and 20khz.
Supplier: Ultrasonic equipment, ultrasonic generator, ultrasonic transducers, ultrasonic reactor, pcb type ultrasonic generator, digital timer, electronic temperature controller, humidity controller, power controller, energy regulator, limit switch, solid state relay, electronic thermostat
Description 1. High purity (Sn99.99 Sn99.95 Sn99.90), excellent weldability, good infiltration. 2. Clean, beautiful. After welding, insulation, high resistance, low ionic contamination, PCB board welding residual minimal. 3. Good oxidation resistance, low tin slag and cost savings. 4. Solder joint is bright, full and uniform. 5. Economical and can produce the lowest consumption of the solid solder joints. Application Tin ingot is widely used as a coating material in High precision electronic Products, and other requirments of precision welding products, general electronics, food industry packaging, automotive and electrical industry, and hightemperature resistant products.
The in-line reactor can be scaled up to any power and size for different production capacity. Each reactor can be connected in series to achieve the designated power. In-line reactor can increase the chemical activity during at cavitation process. General Specification : 1) Output power : 1200W 2) Operating Frequency : 20KHz / 25KHz 3) Maximum fluid temperature : 100C 4) Maximum operating pressure : 5 bar 5) Maximum flow rate : 700L/hr/unit
SLT Digital timer is a cost effective programmable timer with time range from 0.1s to 999H with count up or count down function. It is easy to set the time by pressing the "Select" key to choose second, minute or hour. Then press "UP" or "DOWN" key to set the time. Operation is simple. It provide both time delay and instantaneous configuration. General Specification : 1) Input : 24VDC / 110VAC / 220VAC 2) Output : 1 timed relay / 2 timed relay. 3) Time Range : 0.1S to 999H ( Selectable) 4) Ultra-large and brightness 7-segment LED display : 14mm. 5) IP 65 water proof panel. 6) Standard mounting hole 45mm x 45mm. 7) Snap-In mounting design for easy installation. 8) Standard 8-pins industrial relay connection. 9) External trigger / power ON trigger.
"DTC" Digital Thermostat can be used for heating and cooling application with following technical feature. - High precision with 0.1C / 0.1F for better readability and market requirement. - Wide temperature measuring range from -40C to +150C. - High performance and durable thermoplastic materials housing. - Water and humidity proof on front panel. - High working temperature up to 70C ambient. - Heating / Cooling control possible. - Cooling control with auto or manual defrost cycling. - Internal buzzer or output relay for alarm application. - Configuration of parameter via smart card. General Specifications : Control temperature range : -40C ~ +150C / -40F ~ + 302F Maximum ambient temperature : 70C Input power : 12V~24Vac/dc, 120Vac, 220Vac, 50/60Hz Input Sensor : NTC Output Relay : 8A, 250Vac for heater / compressor Mounting : Panel mount with locking clip. Indication : 3 digits 7 segments Red LED with output function indication. Control Accuracy : +/- 0.5% of FS Indication resolution : 0.1C / 0.1F < 99.9C Alarm : Internal buzzer or output alarm relay Protection : IP65 Security : Password locking
New SA - Series "Solid State Relay" can provide additional feature to traditional SSR. It equipped with 1) Thermal protector to prevent overheat. 2) Load failure LED indication to monitor the load condition. General Specifications : 1) Input : 3 ~ 32Vdc / 90 ~ 280Vac 2) Output Voltage : 90 ~ 280Vac / 90 ~ 440Vac / 90 ~ 660Vac 3) Output switching current : 10A ~ 125A 4) Switching Principle : Zero crossing / Instant turn on 5) Protection : Snubber filter, Over voltage protect, Over temperature protection 6) Input Indication : LED indication 7) Output Indication : LED load failure indication
