Wind Mill

Model name V400 Rated power 400w Max power 500w Output voltage 12v/24v Start wind speed 2.5m/s Rated wind speed 11m/s Working wind speed 2.5-45m/s Gross weight 9kg Rotor diameter 1.33m Blade number 3 Blade material Cfrp Generator Three-phase permanent magnet synchronous generator Control system Manual&electromagnetic brake Tower pole type 6m Capacity and quantity of battery(reference) 12v100ah 2pcs Can supply power for Lighting, electric fan, tv 79*40*23cm 11.5kg

Model name V600 Rated power 600w Max power 700w Output voltage 24v Start wind speed 2.0m/s Rated wind speed 13m/s Working wind speed 2-45m/s Gross weight 15kg Rotor diameter 1.85m Blade number 3 Blade material Cfrp Generator Three-phase permanent magnet synchronous generator Control system Manual&electromagnetic brake Tower pole type 6m Capacity and quantity of battery(reference) 12v100ah 2pcs Can supply power for Lighting, electric fan, tv, washer. 98*58*26cm 18kg.

Generator Rating 50KW 59 rpm 50HZ/60HZ Windward way: upwind mode & down wind mode (recommend type is downwind mode) Induction motor: 55KW 1500RPM provided by SIEMENS(CHINA) Gear box type: level helical Service factor: 2.1 Weight: 3000kgs Blades Material: Fiberglass reinforced polyester Rotor diameter: 13.8m Swept area: 150m2 Weight: 240kgs Controller: Mitsubishi PLC Schneider contactor GPRS/ADSL remote control Touch screen interface . IP65 cabin Protection Mode High speed shaft brake--failure type brake Low speed shaft brake--disk brake Yawing brake--disk brake Operational Data Start-up wind speed: 2.5m/s Rated wind speed : 12.5m/s Cut-out wind speed: 20m/s Survival wind speed: 45m/s Tower Tower type:24m free standing tower Material: Hot dip galvanized steel Weight: 4200kgs. Plywood Cases And Weave Bag.

Parameter Rated power(W) : 10000 Rated voltage(DCV) : 240 Rated current(DCA) : 42 Rotor diameter(m) : 8.0 Blade material : GFRP Rotation direction : Clockwise Start-up wind speed(m/s) : 2.5 Rated wind speed(m/s) : 10 Cut-out wind speed(m/s) : 16 Survival wind speed(m/s) : 45 Net weight(T) : 1.0 Wind turbine type : Upwind Rated Rotating speed(RPM) : 180 Blades No. : 3 Hydraulic tower height (m) : 12 Yaw mechanism : Electrical Annual yield(kwh) : 24000 Yaw mode : Auto/manual Efficiency : 0.85 Wind turbine tilt-angle : 6¡ã Protection mode : Yaw -Hydraulic brake -Dumpload. Plywood cases and weave bag.

Model S-600 Rated voltage dcv : 24 Rated current dca: 25 Rated power w : 600 Start-up wind speed m/s : 2.5 Rated wind speed m/s : 9.5 Security wind speed m/s : 45 Protection mode :Dump load Generator type : Pmg Rotor diameter m : 1.6 Blades quantity pcs : 3pcs Nacelle material : Carbon reinforced fiberglass Blades material : Carbon reinforced fiberglass Designed life time year :15 Warranty(year) : 2. Plywood cases and weave bag.

CE,ISO certified for "Small Wind Turbine with High Reliability". 2.Low start up wind speed,less weight with low torque starting technique applied. 3.The design of blades: The blade casted into molding at one time with balance up to 99%. 4. Amazingly quiet operation with little or no vibration. 5. The turbine tail and yawing part (nylon and fiberglass materials with high strength) processed with reinforced ribs, enhance the reliability and can withstand the typhoon. 6.Carbon brush casted into molding at one time, it can reduce the contact resistance effectively and the lifetime is up to 100000 times 7.Easy installation, no welding needed. one pc in one carton

Product information Model: hummer wind turbine 2kw H-3.8-2kw wind turbine which features high efficiency and low rated wind speed introducing several patented technologies and some special materials. Application Well used in: Housing Telecommunications station Tv transfer station Monitoring station (military, hydrology, observatory) Water-pumping station Technical parameter Rated power(w) 2000 Maximum output power (w) 3200 Charging voltage (v) dc 120v Blade quantity 3 Rotor blade material grp Rotor blade diameter(m) 3.8 Start-up wind speed (m/s) 3.0 Rated wind speed (m/s) 9.0 Rated rotating rate (r/min) 450 Wind energy utilizing ratio (cp) 0.45 Generator output single-phase Frequency conversion ac Rated charging current (a) 15 The maximum charging current (in a short time )(a) 28 Output ac frequency (hz) 0-370 Generator efficiency >0.8 Tower diameter(mm)114*2000*5 Tower height(m) 10 The weight of generator(kg) 25 Battery 12v 150ah/200ah 10pcs Plywood container.

The 1kw wind turbine is an equipment to convert wind energy into electric power which is changed into storage battery group(off-grid type ) or feeding to ac grid (on-grid type). It can be widely used in rich wind areas but without normal energy supply from any power system .It is capable of providing power for lighting, tv, telecommunication equipment and so on. The 1kw wind turbine is mainly composed of generator, blade, tail, hub, controller, dump loader, inverter, tower, tower base, cable , accessories . Main technical performances Rotor diameter (m): 2.8 Material and number of the blades: reinforced fibber glass*3 Rated power/maximum power : 1000/1500 Rated wind speed (m/s): 10 Startup wind speed (m/s): 3 Working wind speed (m/s): 3-20 Survived wind speed: 35 Start torque (n/m): 1.5 Rated rotate speed(r/min): 500 Working voltage : dc24v /dc48v Generator style : three phase, permanent magnet, ac Charging method: constant voltage current saving Speed regulation method : electromagnetic brake+ yawing Stop method: electromagnetic brake+ manual Tower style : guy wire tower /free stand tower/ folded tower Tower height (m): 6/7/8/9/10 Life time: 15years Generator/blade/tail /hub 142*61*31cm 120kg Controller 49*45*31cm 16kg

The 5kw wind turbine is an equipment to convert wind energy into electric power which is changed into storage battery group(off-grid type ) or feeding to ac grid (on-grid type) . It can be widely used in rich wind areas but without normal energy supply from any power system .It is capable of providing power for illumination, driving appliances, communication devices, electric tools and so on. The 5kw wind turbine is mainly composed of generator, blade, tail, hub, manual brake system, controller, dump loader, inverter, tower, tower base, cable , accessories. Main technical performances: Rotor diameter (m): 5.0 Material and number of the blades: reinforced fibber glass*3 Rated power/maximum power : 5000/7500 Rated wind speed (m/s): 10 Startup wind speed (m/s): 3 Working wind speed (m/s): 3-25 Survived wind speed: 40 Rated rotate speed(r/min): 300 Start torque (n/m): 4.5 Working voltage: dc48v/dc240v Generator style: three phase, permanent magnet, ac Charging method : constant voltage current saving Speed regulation method : electromagnetic brake+ yawing Stop method: electromagnetic brake+ manual Tower style : guy wire tower /free stand tower/ folded tower Tower height (m): 8/10/12/13/15/18 Life time: >15years Generator/blade/tail /hub 164*61*38cm 140kg Controller 49*45*31cm 16kg