Power ac110v / 220v 50 / 60 hz
Compressor supply 4 kg / cm2
Power consumption 500w
Rotation speed 50 rpm
Wire size óx 0.4~3.0mm
O.D. Of toroidal óx 80mm max
I.D. (finished) óx 4mm min
Height of toroidal(max) 50 mm
Function:
Semi - automatic hook winder.
Able to set - up the winding pitch.
Able to set - up the winding turns.
Able to set up - up the direction of forward or reverse winding.
Product Introduction PET spunbond substrate fabric compared with short fiber polyester tire has high tensile strength, elongation, stability, aging resistance, long service life, good wettability and other characteristics, as the internationally recognized high-performance SBS, APP and other modified asphalt waterproof roll tire. Application Area Modified asphalt waterproof coil is widely used in waterproof concrete building, such as building roof, underground structure, high-speed railway, tunnel, highway and railway bridge waterproof field.
As Per Client Requirement Of Vessel Design Requirement. We Can Carry Detailed Design And Fabrication As Per Requirement. With Heating, Cooling /heating Cooling Coils For Thermic Fluid /steam /electric, Agitators For Mixing, Safety Devices Like Pressure Relief Valves/measurement, Instrumentation For Measurement/ Structure Design., Etc. Also Can Be Supplied As A Complete Skid Kettles -non Pressursed Vessel Moc : Cs /cs Epoxy Lined / Ss / Alloy Steel.
V6 Borewell Submersible Pumpset Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series - 60 feet head per stage in radial flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Additional intermediate bearing in higher stage pumps - Fully SS pump set are available in SS - 304 Grade Specification - Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply. - Speed : 2900 RPM - Head Range : 12 Mtr. To 600 Mtr. - Discharge Range : 1080 LPM to 170 LPM - Outlet Size in Inch : 2.0, 2.5 , & 3.0 - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles Salient Features - SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series - 60 feet head per stage in radial flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Additional intermediate bearing in higher stage pumps - Fully SS pump set are available in SS - 304 Grade Specification - Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply. - Speed : 2900 RPM - Head Range : 12 Mtr. To 600 Mtr. - Discharge Range : 1080 LPM to 170 LPM - Outlet Size in Inch : 2.0, 2.5 , & 3.0 - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
Brand Honeywell Total Weight 11 Kg Model Number T8000 Alarm Activation 55+-5 Bar Alarm Volume 90 dBA Approve Temperatures 60 Degree Celsius Apparatus Type Approvals EN 137:2006 Type 2 Filling Pressure 300 bar Volume of Air 2040 Litre Operating Temperature +60 Degree Celsius The Honeywell T8000 Self-Contained Breathing Apparatus (SCBA) is a type of respiratory protective equipment designed to provide breathable air in a hazardous or contaminated environment. It consists of a backpack containing a compressed air cylinder, a regulator to control the flow of air, and a mask or hood that covers the user's face. The T8000 model features a lightweight and ergonomic design, a high-performance demand valve, and a user-friendly interface. It is typically used in industries such as firefighting, mining, and chemical processing, as well as by first responders in emergency situations.
STHS Consulting is an official partner of Poqutec Co., Ltd. a South Korean manufacturer specializing in high-performance construction equipment and heavy machinery attachments. With a focus on reliability and efficiency, Poqutec offers a wide range of products designed to enhance the capabilities of excavators, backhoe loaders, skid steer loaders, and wheel loaders. Their product lineup includes hydraulic breakers, crushers, pile drivers, vibro rippers, compactors, and pulverizers, which are engineered for tasks like demolition, excavation, and material handling. Poqutec is also known for its advanced attachments such as tilting couplers, bucket crushers, drum grinders, and various grapples, which cater to industries ranging from construction to mining. The company provides customized solutions tailored to different machinery brands and weight classes, ensuring compatibility and optimal performance. Poqutec prioritizes quality and innovation, with its products being rigorously tested and meeting international standards. The company exports globally and collaborates with partners in diverse markets to deliver cutting-edge solutions for heavy machinery applications.
Description: Save floor space, coil material loading time and increase production with this excellent LIHAO Electronically Controlled Pallet Reel. The FU's specialty is light gauge, thin material with narrow width, such as tab stock material for beverage cans, electrical parts and other related industries. Working principle Flat decoiler adopts horizontal flat carrying material method, through induction swing rod to control frequency conversion motor drive disc rotation, material through the steering wheel into the pulling roller, speed regulating motor drive the pulling roller rotating through the tensioner, feeding the material, when the material length is more than the press machine needed, swing rod swing downward, disc motor speed will slow down and eventually stop, at the moment, the pulling roller continue to rotating. When the flat disc stop, the material is pulled tightly, the pulling roller will stop, but the roll motor will continue to rotate, the tensioner skidded and does not work, the tension can be adjusted to pull the material without damage, thus to continuously feed in a cycle. The machine has the characteristics of strong structure, overlapping placed, speed adjustable, and variable speed, easy operation and so on. It is suitable for all kinds of metal, nonmetal and thin coil material.
Supplier: Metal products, all types of metals steel pipe seamless and welded, galvanized steel coil, steel sheet PPGI, stainless sheet, aluminum coil, ingots scrap angel bar, H steel beam, and deformed steel bar are widely applied to auto industry, household appliances, construction industry, and highway guardrail construction
Services: Trading, recycling
Buyer: Metal products, recycling machine, waste materials, agricultural products
SPM are used for inducing a residual compressive stress on the surface of the component thereby improving its resistance to fatigue failure, which result in better life and reliable operation. Indexing Table Type Shot Peening Machine Coil Spring Shot Peening Machine Diabola Type Shot Peening Machine Leaf Shot Peening Machine Pneumatic Shot Peening Machine Pneumatic Robotic Shot Peening Machine