This jaw crusher is ideal for primary and secondary crushing. With the increase of production, our jaw crusher can greatly reduce the operating costs. And it is of reliability and flexibility. The large feed opening and force-feeding action from the inward and downward eccentric movement of the swing jaw mean that our jaw crusher can increase the capacity. The jaw has a smaller discharge setting, allowing for a higher degree of flexibility with relative equipment. Positive setting adjustment is easy. The jaw crusher has features of simplicity, easy access and low maintenance.
-feeding size; 100mm; -output size of production: 6-38mm; -handling capacity: 500-1200kg/h; -ce certificate; -e-stop interlock device; Plywood case for each jaw crusher; Dimension:113x127x80cm; Weight:about 585kg
Jaw crusher is widely used in many industrys including Mining, Construction, Quarry, Ore, Stone, Chemical Industry, Metallury, Building Materials, Highway, Road and so on. It is suitable for the primary or secondary crush of large rock with compressive resistance no more than 320MPa. PE Jaw Crusher is used for primary crushing, and PEX jaw crusher is used for secondary and fine crushing.
ModelPE-150*250 Feed opening150*250(mm) Max.feeding size125(mm) Adjusting range of discharge opening10-40(mm) Processing capacity1-3 (t/h) Rotation speed of eccentric shaft250(r/min) Motor power5.5(kw) Total weight (t):0.8 Dimensions(L*W*H)(mm):720*660*850 PE-150*250
Model:pe-200*300 Feed opening (mm):200*300 Max.Feeding size (mm):180 Adjusting range of discharge opening (mm):15-50 Processing capacity (t/h):2-6 Rotation speed of eccentric shaft (r/min):260 Motor power (kw):7.5 Total weight (t):1.2 Dimensions(l*w*h)(mm):910*750*990
Application of Our 5-10t/h mining machine glass crusher machine for sale is mainly used for crushing medium-hard or brittle materials with hardness not more than 300mpa and 15% moisture, such as coal, cement, gypsum, alumen, brick, tile, limestone, glass etc. This 5-10t/h mining machine glass crusher machine for sale can be divided into two kinds: one is single stage hammer crusher and the other is double stage hammer crusher. With the history of producing hammer crusher for more than 20 years, huashengming heavy machinery factory can provide the most economical crusher as per the customers' different requirements to meet their needs. 5-10t/h mining machine glass crusher machine for salefeatures 1.Simple structure, easy operation; 2.Big crushing ratio, high production efficiency; 3.Uniform particle sizes; 4.Discharging sizes can be adjusted depend on customers request. 5-10t/h mining machine glass crusher machine for salestructure This hammer crusher is composed of machine frame, rotor, hammer, impact plate and screen board. According to customer request, can adjust the gap between the grid bars to change the discharging granularity. 5-10t/h mining machine glass crusher machine for saleworking principle The main working part of 5-10t/h mining machine glass crusher machine for sale is the rotor with hammers. The rotor consists of main shaft, disk, hinge pin and hammers, a sieve plate is below the rotor. The motor drives the rotor to rotate at a high speed. When the materials get into the crushing cavity, they are crushed by the rotating hammers, the crushed products which meet the required size can be discharged from the sieve plate and become the final products, the products with larger size are brought back to the crushed area for being re-crushed until they reach the required size.
Jaw crusher application: Jaw crusher is widely used in mining , smelling, building material, highway, railway, water conservancy , chemical industry and many other departments, for this machine, the suitable crushed material are pyrite, limestone, basalt, phosphate, heavy crystal stone, calcium carbide, coke, etc. Jaw crusher features: This jaw crusher is composed of machine frame, eccentric shaft, large belt pulley, flywheel, movable jaw , side guard, toggle plate goggle plate backseat, adjust gap screw, return spring, fixed jaw plate and movable plate, among them, the toggle plate still play a role as insurance. This series have: high crushing ratio, even granularity, simple structure, reliable operation, easy maintenance, low operating cost. 1.Crushing chamber is deep and no dead zone, improving feeding ability and capacity 2.Crushing ratio is high, finished product is regular 3.Pack discharge mouth adjustment device is reliable and convenient, and its adjustment range is large , increasing the equipment flexibility. 4.Lubrication system is safe and reliable, easy to replace the spare parts, simple maintenance 5.Simple structure, reliable operation, low operating cost. 6.The equipment is saving energy: single machine can save energy by 15-30%, and the system can save above one time. 7.The discharge mouth adjustment range is large, which can meet different customers need. 8.Low noise, small dust. Jaw crusher operating principle: The motor drives the belt wheel, and makes movable jaw up and down by eccentric shaft. When the movable jaw rises, the angle between the fixed jaw and movable jaw gets larger, and the materials can be crushed to reach the crushing target. When the movable jaw is down, the angle between the fixed jaw and movable jaw becomes smaller. The movable jaw plate leaves the fixed jaw plate under the function of drawbar and spring, and then the crushed materials are discharged from the lower outlet of the crushing cavity. Standard exporting container.
Supplier: Small jaw crusher, small hammer cruhser
Diesel engine Jaw crusher Diesel engine Jaw crusher(small rock crusher)is widely used to crush various large stones, limestone, granite, basalt, river gravel, etc. Jaw crusher's highest anti-pressure strength of material to be crushed is 320MPa. The jaw crusher is mainly used to crush hard and medium hard stones in stone mining, metallurgy industry, building material, highway, railway, chemical industry, etc. Diesel Engine Small Crusher Features: 1.Safe and reliable lubrication system, convenient replacement parts, small maintenance workload 2. Deep crushing cavity, no dead zone, increasing capacity and output of the feeding 3. Large crushing ratio 10:1, uniform products particle size 4. The application of tires makes the machine more convenient to move and adapt to various application, especially when your place lack of electricity or you need to move machines frequently Working Principle : Motor drives belt and belt pulley, makes moving jaw up and down through eccentric shaft. When the moving jaw is up, the angle between lining plate and moving jaw becomes large, and this will push moving jaw plate close to the fixed jaw plate. During this process, the material is crushed and ground, thus the crushing will be done. When the moving jaw is down, the angle between lining plate and moving jaw becomes small, the moving jaw plate will leave the fixed jaw plate on account of the effect of pulling bar and spring, and then the crushed material will be discharged from the lower opening of the crushing room. With the motor continuously rotating and the material periodically crushed and discharged by the crusher, the mass production can be realized.
The jaw crusher is commonly known as smashed, also known as the tiger's mouth. The crushing chamber is composed of two jaws, which are composed of two jaws, which simulate the two movements of the animal to complete the crushing operation of the material crushing operation. It is widely used in the crushing of various ores and bulk materials in industries such as mining, building materials, roads, railways, water conservancy and chemical industry. The highest compressive strength of the material to be crushed is 320 MPa. Jaw crushers are mainly used as coarse crushers and medium crushers in mining, building materials and infrastructure. According to the width of the feed port, it is divided into three types: large, medium and small. The feed port width is larger than 600MM for large machines. The feed port width is 300-600MM for medium-sized machines. The feed port width is less than 300mm for small-sized machines. machine. The jaw crusher is simple in structure, easy to manufacture and reliable in operation. The working part of the jaw crusher is two jaws, one is a fixed jaw (fixed), the vertical (or the upper end is slightly inclined) fixed on the front wall of the body, and the other is the movable jaw (moving), the position Tilting, forming a large and small crushing cavity (working cavity) with the fixed jaw. The movable jaws periodically reciprocate against the fixed jaws, sometimes separated and sometimes close. When separated, the material enters the crushing chamber, and the finished product is discharged from the lower portion; when close, the material contained between the two jaws is crushed by bending, bending and splitting. The jaw crusher can be divided into a simple swing jaw crusher (simplified pendulum jaw crusher) according to the different swinging modes of the movable jaw. There are three kinds of complex swing jaw crusher (complex pendulum jaw crusher) and integrated swing jaw crusher. +86 18642196671 zoeyguo@babbittalloy.com wechat:chaoyangrunxing
