Sharp diamond-like cutting edges that has less than 0.1% free silica and does not attract moisture. Provides fast cleaning with low dust. Any size available.
From 50 to 4000 lbs per bag
Black silicon carbidedescription Black silicon carbide is produced at high temperature in an electric resistancetype furnace with quarts and petroleum as its main raw materials. Its hardness is between fused alumina and synthetic diamond. Mechanical intensity of it is higher than fused fused alumina. It is brittle and sharp and has electrical and heat conductivity in some degree. The abrasives made of it are suitable for working on cast iron, non-ferrous metal, rock, leather, rubber, etc. It is also broadly used as refractory material and metallurgical additive. Company introduction Our company was established in 1976, is a famous manufacturer of abrasive powder in china. Our company supply types of abrasive, including black silicon carbide, white fused aluminum oxide. The specification and f, p, jis standard graded powder is available on request. Otherwise, our company owns the laboratory. Our abrasive sell well in china and through-out the world. Black silicon carbidestandard Black silicon carbide f12 - f1500, standard: gb/t 2481.2-1998, iso 8486-2: 1996, jis r6001-1987. Black silicon carbideapplication Sand blasting, coarse grinding, boned abrasive tools Polishing, lapping, wire sawing Refractory material Black silicon carbidepackage P.V.C 25kg small bags + jumbo bags or pallets P.V.C 25kg small bags + jumbo bags or pallets
Black silicon carbide description Black silicon carbide is produced at high temperature in an electric resistancetype furnace with quarts and petroleum as its main raw materials. Its hardness is between fused alumina and synthetic diamond. Mechanical intensity of it is higher than fused fused alumina. It is brittle and sharp and has electrical and heat conductivity in some degree. The abrasives made of it are suitable for working on cast iron, non-ferrous metal, rock, leather, rubber, etc. It is also broadly used as refractory material and metallurgical additive. Company introduction Our company was established in 1976, is a famous manufacturer of abrasive powder in china. Our company supply types of abrasive, including black silicon carbide, white fused aluminum oxide. The specification and f, p, jis standard graded powder is available on request. Otherwise, our company owns the laboratory. Our abrasive sell well in china and through-out the world. Black silicon carbidestandard Black silicon carbide f12 - f1500, standard: gb/t 2481.2-1998, iso 8486-2: 1996, jis r6001-1987. Black silicon carbideapplication Sand blasting, coarse grinding, boned abrasive tools Polishing, lapping, wire sawing Refractory material Black silicon carbidepackage P.V.C 25kg small bags + jumbo bags or pallets P.V.C 25kg small bags + jumbo bags or pallets
Supplier: Abrasives, aluminum oxide, white aluminum oxide, brown aluminum oxide, pink aluminum oxide, shot blasting abrasive, equipment, steel shot, steel grit, stainless steel grit, stainless steel shot, garnet, almen strips, almen gage, silicon carbide, sic, black silicon carbide, green silicon carbide, cut wire, glass beads, brown fused aluminum oxide, white fused aluminum oxide, BFA, WFa, white corundum, pink corundum, plastic media, cut wire pellets, ceramic beads, shot blast machine, sandblast machine, vibratory surface finishing
Standard & Grade :ASTM A179 Boiler tube Ends:Square Ends/Plain Ends (straight cut, saw cut, torch cut), Beveled/Threaded Ends Delivery state: Annealed, normalized, tempered. surface oiled, black painted, shot blasted, hot dipped galvanized. Packing:Bundle or bulk , wooden case or other seaworthy packing or for the client's requirement
1- Made of 100% nature rubber. 2- Soft and durable. 3- Good for industrial workers for protection against chemical splash and abrasion. 4- Also recommended for fishing, sand blasting, mining, waste and light chemical processing. 5- Smooth finish, Rolled cuff 6- Color: Black outside and Orange inside 7- Size: 14", 18" 8- CE EN388 / EN420 approval
95%Min Al2O3 Refractory Material Abrasive Fused Brown Alumina made from Calcined Bauxite, also known as Brown corundum, also called as emery,95%Min Al2O3 Refractory Material Abrasive Fused Brown Alumina main chemical composition is AL2O3, and alumina content of Brown Fused Alumina is 97% -70%.95%Min Al2O3 Refractory Material Abrasive Fused Brown Alumina also contains a small amount of brown corundum abrasive stones such as Fe, Si, Ti. 95%Min Al2O3 Refractory Material Abrasive Fused Brown Alumina is hard and tough material, used in manufacturing of grinding wheels (both vitrified and resin bonded) and coated products. These grains are also widely used for shot blasting and polishing media. BFA for Refractory materials: 0-1mm, 1-3mm, 3-5mm, 5-8mm, 200 #, 325 # Brown fused alumina For Abrasives: F24- F60 Brown fused alumina For Sandblasting: F10 -240 Brown fused alumina For Precision Casting: F80 - F120 BFA for Ceramic, electronic polishing category: F240-F800 95%Min Al2O3 Refractory Material Abrasive Fused Brown Alumina Product name Main Indicators (%) Density (g/cm3) Appearance Usage Al2O3 Fe2O3 SiO2 Brown fused alumina/BFA â?¥95 â?¤0.3 â?¤1.5 3.85 Brown-Red particle Grinding wheels 90 â?¤1.3 â?¤1.5 3.85 Black granular gray powder Polishing,grinding 85 1.8 1.5 3.85 Black granular gray powder Grinding, Cut pieces, sandblasting 80 2.3 1.5 3.85 Black granular gray powder Polishing,blasting 70 4.3 1.5 3.85 Black granular gray powder Floor
Garnet sand is made of garnet as raw material. It is a kind of iron-aluminum silicate with moderate hardness, high melting point and stable chemical properties. According to different products and structures, it presents different colors, such as dark red, brown red, pink and black. Widely used in optical industry, electronic industry, machinery industry, oil and gas and other industries. 1. Sand blasting and rust removal for steel structure, hull and bridge; 2. Water knife cutting for metal, stone and glass; 3, chemical, petroleum, water treatment filter media; 4. Grinding of marble, optical lens, glassware, leather and other materials; 5. Raw materials of grinding wheel, whetstone, emery cloth and sandpaper; 6, highway pavement, runway, wear-resistant rubber, anti-skid paint and other wear-resistant materials; 7, widely used in the construction industry, high-grade real stone paint exterior decoration interior decoration temperament noble and elegant. Ideal new non - abrasion resistant aggregate.
1. Sand blasting and rust removal for steel structure, hull and bridge; 2. Water knife cutting for metal, stone and glass; 3, chemical, petroleum, water treatment filter media; 4. Grinding of marble, optical lens, glassware, leather and other materials; 5. Raw materials of grinding wheel, whetstone, emery cloth and sandpaper; 6, highway pavement, runway, wear-resistant rubber, anti-skid paint and other wear-resistant materials; 7, widely used in the construction industry, high-grade real stone paint exterior decoration interior decoration temperament noble and elegant. Ideal new non - abrasion resistant aggregate. Garnet sand is made of garnet as raw material. It is a kind of iron-aluminum silicate with moderate hardness, high melting point and stable chemical properties. According to different products and structures, it presents different colors, such as dark red, brown red, pink and black. Widely used in optical industry, electronic industry, machinery industry, oil and gas and other industries.
Black Silicon Carbide for abrasive 1. Introduction Black Silicon Carbide is produced from quartz sand and high quality anthracite/petroleum coke under high temperature in and electric resistance furnace. It looks black and has a microhardness of 2800-3300kg/mm2. Abrasive tools made of it, are fit to grind metals and non-metals materials of low tensile strength, for example, grey cast iron, brass, alumina, stone, leather and hard rubber etc. It can also be used for refractory purpose or in electronic industry. 2. Chemical composition F8-F360 SiC: 99%min; F. C: 0.2%max; Fe2O3: 0.2%max F400-F600: SiC: 98.5%min; F. C: 0.4%max; Fe2O3: 0.4%max F800-F1200 SiC: 97.5%min; F. C: 0.6%max; Fe2O3: 0.6%max. 3. Application It is widely used in the fields of abrasive(sandcloth, sandpaper, gringding wheel), blasting, grinding, refractory and engineering ceramics industries. Also, it can be processed to micro powder, and used in the field of electronics, spaceflight and advanced internet industry. 4. About us Henan Sicheng Co., Ltd, founded in 1999, is specialized in White Fused Alumina, Brown Fused Alumina, Mullite and other related products. Our production runs under the certifications of GB, ISO, FEPA, and JIS. We offer various items de pending on the demands of our customers. Currently, we have exported our products all over the world, such as Europe, the USA, India, and Japan, enjoying good reputation in machinery, metallurgy, light industry and other fields. FEPA standard 25kg PVC Bags + 1mt Big Bag.
