1 × N rack-mounted optical switch can be manually selected from front panel or control via RS232 port, Ethernet port. It can be controlled to switch step by step or set scanning automatically in certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system.
1 128 rack-mounted optic switch is a kind of functional device,with the ability of controlling and switching optical route. It can be manually selected from front panel or controlled via RS232 port, Ethernet port and auto-scanned on certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system. Features Low insertion loss, Fast switching SerialNet, High Reliability, High Stability LCD display panel. Visual display, Convenient operation Transparent transmission signal. High stability and reliability Channel and time interval of automatic scanning can be set up RS232 Control and RJ45 Ethernet Remote Management Applications FITL Automatic Measurement Optical Network Remote Monitoring Cable Monitoring and Maintaining system Parameters Parameters Unit Indicators Unit Type XH- FSW-1X128 Wavelength Range nm 1250~1700nm Test Wavelength nm 1550nm Insertion Loss dB Typ. 0.8dB,Max. 1.5 dB Repeatability dB 0.02 Return Loss dB 50 Crosstalk dB 70 WDL dB 0.25 PDL dB 0.05 Optical Power mW 500 Switching Time ms 12 ms adjacent channel Fiber Type um 9/125 Connector LC/PC Monitoring Port RJ45 & RS-232 Working Power Supply Plug-type 1 128 rack-mounted optic switch is a kind of functional device,with the ability of controlling and switching optical route. It can be manually selected from front panel or controlled via RS232 port, Ethernet port and auto-scanned on certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system. Features Low insertion loss, Fast switching SerialNet, High Reliability, High Stability LCD display panel. Visual display, Convenient operation Transparent transmission signal. High stability and reliability Channel and time interval of automatic scanning can be set up RS232 Control and RJ45 Ethernet Remote Management Applications FITL Automatic Measurement Optical Network Remote Monitoring Cable Monitoring and Maintaining system Parameters Parameters Unit Indicators Unit Type XH- FSW-1X128 Wavelength Range nm 1250~1700nm Test Wavelength nm 1550nm Insertion Loss dB Typ. 0.8dB,Max. 1.5 dB Repeatability dB 0.02 Return Loss dB 50 Crosstalk dB 70 WDL dB 0.25 PDL dB 0.05 Optical Power mW 500 Switching Time ms 12 ms adjacent channel Fiber Type um 9/125 Connector LC/PC Monitoring Port RJ45 & RS-232 Working Power Supply Plug-type V AC:100 240 (50/60Hz) Power Consumption W 10 Operating Temperature -10 60 Size mm 3U:483 x 230 x 134 AC:100 240 (50/60Hz) Power Consumption W 10 Operating Temperature -10 60 Size mm 3U:483 x 230 x 134
Product description When the float goes up and down along the fixed support or shaft under the liquid buoyancy and swings up and down, the permanent magnet at the end of float fixed shaft swings accordingly under lever function, which consequnetly drives the micro switch in the junction box to move and output the on or off signal for alarming or remote control. Installation method: A. Keep the electrical interface of the junction box downward, please choose anti-corrosive type sl80/sl81 for acid and alkaline liquids B. Please keep the float and the linkage rod away from the connection tube
Manufacturer & Exporter of Side Mounted Magnetic Level Switch. Our product range also comprises of Glass Tube Rotameter, Acrylic Body Rotameter and Bypass Rotameter. We have been widely appreciated by the esteemed customers for our ability to offer a quality range of Side Mounted Magnetic Level Switch. The range is widespread and meets various industry applications catering to all type of operating conditions. The switches can have miniature floats, vertical or horizontal mounting operating in single and multiple liquid levels. Applications: High / Low level Alarm Automatic Pump/Valve control Elimination of tank over flow Enhances pump safety against dry running Features: Temperature: 0-3000C Pressure: 20 KG/CM2 MOC: SS-304, SS-316, SS-316L, PP Details Required For Quotation: Nozzle Size On Which You Are Intending To Mount The Switch Material Of Construction Of Wetted Parts Service Specific Gravity Operating Pressure Operating Temperature Flange Details Housing Enclosure (Flame Proof/ Weather Proof)
XH-FSW-8-8 rack-mounted optical switch is a kind of functional device,with the ability of controlling and switching optical route. It can be manually selected from front panel or controlled via RS232 port, Ethernet port and auto-scanned on certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system. Features: Low insertion loss, Fast switching SerialNet, High Reliability, High Stability LED display panel. Visual display, Convenient operation. Transparent transmission signal. High stability and reliability. Channel and time interval of automatic scanning can be set up. RS232 Control and Ethernet Remote Management Applications: FITL Automatic Measurement Optical Network Remote Monitoring Cable Monitoring and Maintaining system Specifications Parameters Unit Indicators Channel No. 8-8 Wavelength Range nm 1260~1650 Test Wavelength nm 1310/1550 Insertion Loss dB 2.5 dB Repeatability dB 0.04 Return Loss dB 50 Crosstalk dB 55 WDL dB 0.50 PDL dB 0.1 Optic Power mW 500 Fiber Type SM 9/125um Connector FC/APC Monitoring Port RJ45 RS-232 Working Power Supply Plug-type V AC:100ï½? 240 (50/60Hz) Power Consumption W 30 Operating Temperature -10 60 Size mm 4U:483 x 500 x 178
Introduction 2xN rack-mounted optical switch is a kind of functional device,with the ability of controlling and switching optical route. It can be manually selected from front panel or controlled via RS232 port, Ethernet port and auto-scanned on certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system. Features Low Insertion Loss and Fast Switching SerialNet, High Reliability, High Stability LCD Display RS232 Control and Ethernet Remote Management Applications FITL Automatic Measurement Optical Network Remote Monitoring Cable Monitoring and Maintaining system
ShenZhen CiAn Electronics Co.,LTD specializes in the R&D, production and service of Magnetic Reed Switch Sensor. With modern production lines and device, workers and managerment, ShenZhen CiAn Electronics Co.,LTD has owned good reputation both at home and abroad. We export to many countries in the world with long term cooperation relationship for the aim of providing standard and customized solutions for all kinds of applications. Please contact us if you are looking for professional factory of Magnetic Reed Switch Sensor.
Level Switch Being a patron focused organization, we are engaged in manufacturing and supplying best grade Level Switch. We manufacture a qualitative range of water meter that is manufactured using premium grades of raw material. It consists of inferential, multi jet, dry type water meter with magnetic drive and vacuum sealed register. Cable Type Balloon Level Switch We specialize in providing a range of Cable Type Balloon Level Switch that is appreciated for their optimum quality, durability and easy installation. Being the leaders in the industry, we present Cable Float Level Switches to our clients. They require minimum maintenance and are presented at the best rates in the industry. Applications: An Economical, Viable alternative for control in liquid levels Simple, Rugged & Reliable Range: up to 5 mtr. Switch rating: 10-14 AMP@ 230 VAC Material of Construction PVC suitable for most liquids Housing: Weatherproof to IP 66/68/ Flameproof - On request Details Required for Quotation: Tank height No of contacts Level Gauge We are an ISO 9001:2008 certified company involved in manufacturing, supply and exporter of Level Gauges in India. These are manufactured from state of the art technology and is in high demand from our valued buyers. Uses: Water Level Gauge Tank Level Gauge Oil Level Gauge Liquid Level Gauges
RF Level Switch Manufacturer & Exporter of RF Level Switch & RF type Level Switch. Our product range also comprises of Glass Tube Rotameter, Acrylic Body Rotameter and Bypass Rotameter. We specialize in manufacturing a wide range of RF Type Level Switch that vary from simple, single point, low cost level to specialized & complex level. The RF Level switch operates on the basis of RF absorption. The electronic unit generates a sinusoidal wave, applied to the electrode creating a field around it. Design Considerations: RF Type Level Sensors Switch have been designed taking into consideration characteristics and behavior of materials like Solids (in their granular from), Slurries and Liquids. Few important conditions are given below: Coating: Most materials have a common tendency to accumulate and coat over anything in contact like walls or any other part that protrudes inside the vessel. That happens by natural phenomena and can not be avoided completely. The Level Sensor must be unaffected by coating and accumulation of material on the sensing element or on side walls. RF Design: RF Principle based Level Sensors have been designed based on the considerations discussed and various other aspects. Flow star RF Level Sensors are highly reliable for use with materials that are conductive or non conductive, granular or slurries, fines to large particles and contaminated or pure liquids at varying temperatures and pressures. Description: Flow star RF Level Switch series FERF 200 comprises of two parts, namely a Sensing Probe and an Electronic controller. The Sensing Probe has two parts, active section and shield section insulated from each other as shown in the diagram. A dust proof Probe Head is provided to cover the terminals of the Rf signal cable. Meaning hereby, the Probe contains no electronics or any other sensitive element. The Electronic Controller separately housed in dust proof enclosure designed for outdoor duty and mounted at a convenient location. It contains the entire electronics, etc. and is connected through a coaxial cable to the Sensing Probe. Functions: Flow star RF Level Switch Series FERF200 Models work on Rf Principle. Independent but identical low power RF signals equal in frequency, phase, amplitude and wave shape generated in the Electronic Controller are provided to active and shield sections of the Sensing Probe, whereas, the reference ground of electronics is connected to the vessel shell The signal provided to the shield section is maintained constant by use of a compensating circuit in the Electronic Controller while the signal applied to the active section varies with change of media between probe and the vessel shell/wall
