LED street light, is a new, energy-saving product that utiliaes high power led's as light source, it can be powered with the optional solar panel kit with the led color spectrum, there is no ultraviolet light, no infrared rays, no heat, and no radition produced.As a result, oue led street light is a conventional "green " lighting source.
Product features:
1, high efficiency and low energy consumption: imported led chip for light source, light efficiency can reach 100-130lm/w, saving more than 60% energy in comparison to metal halide lamps.
2, one single casting aluminum case, hi-po electrostatic powder plastic spraying surface, corrosion and rust resistent
3, 4mm special anti-dazzle steel glass, heat & impact resistant
4, radiator consists of 22 pieces of 1070 aluminum radiating sheet, the heat transmitting index of 1070 aluminum is 226w/mk.
5, environment friendly, no lead and mercury, no infrared and ultraviolet ray radiation
6, even and comfortable light, no overlapping shadow; good color rendering, color temperature close to the sunlight
7, power with constant current and constant voltage control; can endure the undulation from the grid, no noise and no stroboflash.
8, exterior fastener uses stainless steel, dainty and endurable.
9, built-in or built-out power supply.
Major parameter:
Rated voltage:ac 220v
Rated power:led 100w(120w custom made)
Luminous flux:100w 10000lm
Casing material: high strength aluminum alloy
Transparent part material: special steel glass
Waterproof level:ip65
Corrosion-proof level:wf2
Weight:5.2kg
Dimension;270*250.5*130mm
Mounting method: wall mounting, ceiling mounting and seat mounting
Product Features:
1. High efficiency and low energy consumption: imported LED chip for light source, light efficiency reaching to 100-130lm/v, saving more than 60% energy in comparison to halogen lamp.
2. One single casting aluminum case, hi-po electrostatic powder plastic spraying surface, corrosion and rust resistant.
3. High purity aluminum reflection cup proceed by chemical brightening and anodize, color never change,high reflection efficiency.
4. 4mm special anti-dazzle steel glass, heat and impact resistant
5. Radiator consists of 22 pieces of 1070 aluminum radiating sheet, the heat transmitting index of 1070 aluminum is 226W/mk.
6. Even and comfortable light, no overlapping shadow; Good color rendering, color temperature close to the sunlight
7. Environment friendly, no lead and mercury, no infrared and ultraviolet ray radiation
8. Power with constant current and constant voltage control; can endure the undulation from the grid, no noise and no stroboflash.
9. Exterior fastener uses stainless steel, dainty and endurable.
10. Built-in power supply.
Main Parameters:
Rated Voltage: AC 220V
Rated Power: LED 50W
Luminous flux: 50W 5000lm
Casing material: High strength aluminum alloy
Transparent part material: Special steel glass
Waterproof: IP65
Corrosion-proof: WF2
Weight: 2.8Kg
Dimension: 281.6*207.3*118.32mm
Mounting method: wall mounted, ceiling mounted and seat mounted
Product heat dissipation advantage:
1.High thermal conductivity 6063 aluminum radiating sheet: 201W/mK,it is 2.3 times higher than traditional ADC12 die-casting aluminium: 96W/mK.
2.Chip substrate using red copper,thermal conductivity: 401W/mk,capacity of heat transmission increased double times compared with aluminum ?
3.Thermally Conductive Silicone use DOW CORNING,thermal conductivity: 3.3,gray color,it makes the chip heat passed through thermal conductive silicone rapidly to the radiator fins. General lamps and lanterns manufacturers choose white thermal conductive silicone, heat conduction coefficient is 0.8~1.2
4.Lighting up half an hour,negative spot weld temperature less than 65 degree;fins in back temperature different in 5 degree;chip temperature different with chip back also in 5 degree.
5.The heat sink thickening processing, greatly increases the heat dissipation area, heat faster and more efficient.
6.Uniform light color
Product features:
1,High raising efficiency and saving energy, 1000 hours consumes only 1kWh
2,Health light without ultraviolet ray, infrared ray, non producing radiation
3,Green and environment-friendly, no lead, mercury and phosphorus harmful element, help us to reclamation and recycling
4,Eye protection. No strobe. Working with current power, eliminate the visual fatigue caused by the stroboscopic of traditional light source
5,Highly safe low voltage low current, dissipates small, not produce potential safety hazard, can be used in mine field or other dangerous places
Model No.:
XS-MB001/3W: 3 watt (fixture:ø90*21mm,cut out:�75mm)
XS-MB001/4W: 4 watt (fixture:ø110*21mm,cut out:�95mm)
XS-MB001/6W: 6 watt (fixture:ø120*21mm,cut out:�105mm)
XS-MB001/9W: 9 watt (fixture:ø145*21mm,cut out:�125mm)
XS-MB001/12W: 12 watt (fixture:ø170*21mm,cut out:�155mm)
XS-MB001/15W: 15 watt (fixture:ø195*21mm,cut out:�175mm)
XS-MB001/18W: 18 watt (fixture:ø225*21mm,cut out:�205mm)
XS-MB001/24W: 24 watt (fixture:ø300*21mm,cut out:�275mm)
Light source: 4W
Fixture color: matte white
Housing material: aluminum die casting
LED driver: external constant current isolation drive
CRI (Ra): >80
Lifespan: >50,000hrs
Input voltage: AC 85-265V
Color temperature:
Warm white: 3000-3500k
Natural white: 4000-4500k
Cool white: 6000-6500k
Fixture: Ã? 110*21mm, Cut out:Ã?95mm
LED type: SMD2835
PF: >0.9
Power: 3W/4W/6W/9W/12W/15W/18W/24W
Warranty: 2 years
Certification: 3C, CE, RoHS
High raising efficiency and saving energy, 1000 hours consumes only 1kWh
Health light without ultraviolet ray, infrared ray, non producing radiation
Highly safe low voltage low current, dissipates small, not produce potential safety hazard, can be used in mine field or other dangerous places
High quality light, high color rending, less heat, no UV or IR radiation
Small orders accepted
Good color and luster
Quick delivery time and customize packing
All goods are 100% inspected before shipping, we do at least 4 test, including incoming raw material test, sample test then bulk produce, functional test, burn-in test, appearance inspection
