Features:
1) Blue plastic crust
2) POM gear
3) Applications: Micro planes, hand launch gliders, small electrics helicopters
Specifications:
1) Supply voltage: 4.8~6.0V
2) Speed: 0.12sec/60o (no load running)
3) Torque: 0.4kg. Cm
4) Operating current: 100mA
5) Static current: 1mA
6) Dead band drain: 10uses
7) Connector wire length: 165mm
8) Dimensions (L * W * H): 20.0 * 17.6 * 8.0mm
9) Weight: 3.7g(less connector)
10) Connector: JR and JST plug.
Features: -Futaba, JR, Sanwa and Hitec compatible. Product Details: -Weightú¦9g -Sizeú¦23.2*12.5*22.0mm -Stall Torqueú¦1.3 kg/cm -Operating Voltageú¦4.8-6Volts.
RC helicopter.
Loaded With High-power 130 Brushless Motor; 25A Brushless ESC;9 KG Micro Steering servo P-2ch Radio Control System Installed;7.2V Rechargeable 1100mAh Ni-Mh battery and special charger included;Completely Equipped With Ball Bearings;Captured Suspension Hinge Pins No E-Clips;Fully Assembled Chassis;Fully Painted Body 6pcs/carton, 78*45*30cm
Loaded With High-power 370 Motor; 80A ESC;9KG Micro Steering servo; P-2ch Radio Control System Installed; 7.2V Rechargeable 1100mAh Ni-Mh battery and special charger included;Completely Equipped With Ball Bearings;Captured Suspension Hinge Pins No E-Clips;Fully Assembled Chassis;Fully Painted Body 6PCS/CTN, 78*45*30cm
The Blade 400 3D is designed to give intermediate to advanced heli pilots a ready-to-fly experience like no other. It comes 100% factory built and flight tested so you can get flying right away. The Blade 400 3D is equipped with state-of-the-art features like brushless power, digital servos, a heading lock gyro, CCPM control and symmetrical blades. Its also big enough that you can fly outdoors in breezier conditions that would ground smaller micro-helis. And because its flight tested at the factory no pre-flight setup is required. The Blade 400 3D is ready for everything from smooth hovering to 3D aerobatic flying as soon as you finish charging the battery. There is nothing left to assemble or set up. You can fly it just about anywhere, anytime thanks to the included Spektrum 2.4GHz DX6i radio system that avoids interference with other RC users, even those on other 2.4GHz systems. You also get the benefit of the DX6i+óGé¼Gäós advanced DSM2 protocol that provides the kind of locked-in, solid response that will let you fly even the most demanding 3D maneuvers with absolute precision. The Blade 400 3D is the first ready-to-fly mini-heli to come equipped with Spektrum advanced DX6i 2.4GHz DSM2+ 6-channel programmable computer aircraft system. Besides providing freedom from frequency restrictions and interference, the DX6i DSM2 technology offers other unique advantages like faster control response and innovative features such as ServoSync+. ServoSync automatically resequences transmitted data so mixed servos receive their pulses at the same time so you can fly extreme 3D aerobatics with absolute precision. The system also includes the feather-light, 4.4-gram Spektrum AR6100e Microlite Receiver. E-flite uses top-quality engineering and materials in everything it makes, so you always get the maximum level of value and fun. And E-flite backs all of its products with the best customer service and support in the hobby so your electric flight experience is always a positive one. Features * Completely assembled and test flown at the factory * Capable of sport flying and 3D aerobatics right out of the box * Includes Spektrums DX6i 2.4GHz DSM2 6-Channel computer programmable transmitter and factory-installed AR6100e Microlite receiver * DS75 Digital Sub-Micro servos and G110 Micro Heading Lock gyro offer precise and powerful control * 420H brushless motor, 25-amp brushless ESC and 3S 11.1V 1800mAh 20C Li-Po battery deliver incredible power and performance * CCPM control with push-pull elevator and direct-to-swash aileron/pitch linkages Specifications: Type: RTF Electric 3D Mini Heli Main Rotor Diameter: 28.2 in (718mm) Tail Rotor Diameter: 5.3 in (135mm) Rotor Blade Length: 12.8 in (325mm) Height: 9.0 in (230mm) Length: 25.6 in (650mm) Gross Weight: RTF with Li-Po battery, 23.5 oz (665 g) Motor: 420H brushless outrunner, 3800kV ESC: 25-amp brushless Battery: 3S 11.1V 1800mAh 20C Li-Po Charger: E-flite 3S 11.1V LiPo Balancing Charger 1.8A Transmitter: Spektrum DX6i 2.4GHz DSM2 6 Channel Computer Programmabe Transmitter Receiver: Spektrum AR6100e Microlite receiver Servos: E-flite DS75 Digital Sub-Micro Servos (4) Gyro: E-flite G110 Micro Heading Lock. Guarantee Packaging
1)fuselage length:425mm 2)fuselage height:188mm 3):flying weight:227g 4):motor:180x2pcs 5):trasmitter:4 channels 6):program type:ppm 7):"4 in 1" controller: 4 channels 8):servo:8gx2pcs 9):battery: 7.4-800mah li-polymer battery 10):flying time:14-18 minutes Model features: 1) the helicopter is designed with double-blade-sharing -one -axis that with stability and enables it to easy be operated, which is fit for beginner flight. 2)two180 motors, which make the helicopter with full of power, and flying-off is stable. 3) there are servo range adjustment and gyro sensitive degree adjustment in the 4 in 1 controller . You can adjust parameter by yourself' s skill and fly more pleasing . 4) fast mini servos , which make the dynamic response of the helicopter more exact and nimble. 5) the helicopter is designed with two stabilizer weights that improve the ability to settle its axis and enable it to hang in the air more stable. 6)with power supply of li-ploymer battery enable it to use more safe and fly time longer.Packing:inner packing:gift boxout packing:six gift boxes to one cartonpacking protector: foamgift box size:494*185*228mmcarton size:510*385*710mmcarton g.W/n.W 10.5kg/5.7kg
Align T-REX 600 Nitro Pro 50size RC Helicopter Super Plus Version 1.Both the T-Rex 600 Nitro and 600 Nitro Pro include a Beautiful factory painted fiberglass canopy. Canopy also features a rigid easy clip on/off design for fast installation and removal. 2.Simple and light weight design provides awesome flight performance nearly equal to larger helicopters while still maintaining very stable hovering and flight. 3.+-14? collective pitch is possible for extreme 3D performance. 4.Clutch, Fan and Bell assembly provide a very smooth operation even at high RPM. 5.Forward mounted tail servo helps to keep exhaust oil from entering servo also improves the CG. 6.Pitch and All servos moved forward for CG. 7.Battery tray designed for easy and clean radio gear installation. 8.Fuel Tank Capacity 440cc for about 10 minutes 3D flying. 9.Main Gear Radio 8.5:1, 1500-2200 Rotor RPM. 10.Heavy duty tail with thrust bearings. 11.95mm Tail Blades. 12.Torque Tube driven tail for incredible 50 sized performance. 13.Rigid frame design that can also handle hard crashes without damage. 14.Carbon Fiber frames, fins and boom supports. 15.Super engine cooling system features large diameter fan and very efficient airflow to provide unequaled cooling and horsepower. 16.Clutch/Start shaft feature a 10mm ID one way bearing to eliminate any bearing problems during starting and flight. 17.Ready to fly weight (no fuel) is an incredible 3.20Kg (7lbs). 18.Fuel Tank designed so that no additional header tank is required. 19.New main gear with one-way bearing design for high torque. 20.New flybar paddles feature light weight and sports. 21.New flybar control set design. 22.New tail boom supports. Data Sheet - Length:1160mm - Height:410mm - Main Blade Length:600mm - Main Rotor Diameter:1350mm - Tail Rotor Diameter:240mm - Engine Pinion Gear:20T - Autorotation Tail Drive Gear:180T - Drive Gear Ratio:8.1:1:4.5(E:M:T) - Flying Weight:Approx. 3200g Items Included : Model - T-REX 600 Nitro Pro?50size RC Helicopter - T-rex 600 Nitro Pro Landing Skid - T-rex 600 Nitro Pro Canopy - T-rex 600 Nitro Pro Manual Motor - OS Engine 50SX-H Ring Hyper Heli Engine - Glow Plug for 600 N ESC - B6T 2 In 1 Voltage Regulator HE50H10 Servos - Futaba BLS251 Digital Servo - Futaba S9155 Servo x 3 - Futaba S3152 Servo Gyro - Futaba GY611 SMM Rate Gyro Radio - Futaba 9C Super Transmitter - Futaba PCM R149DP 9CH Receiver Battery & Charger - 600 Carbon Night Blade Charger H60130 Bonus Parts - Fuel tank HN6009 - 600N Fiberglass Canopy HN6035 - Mavrikk PRO Series Carbon Fiber 600mm Main Blades - Trex600 EL Flashing Sticker - 50 High Performance Muffler HE50H08 - 600 Carbon Fiber Night Blades/3K H60131 - Flying Cap BG61548 - Main Blade Holder/New (H60145) - Radio Sling KX150006 - Flying T-shirt (White) BG61557 - Trex600 EL Flashing Sticker with tail boom Metal Parts - Align Metal Main Rotor Holder - Align Metal Flybar Seesaw Holder - Metal Tail Control Arm (HN6038) - Align Metal Tail Pitch Assembly - Metal Aileron Lever - Metal Engine Fan - Align Metal SF Mixing Arm - Metal Elevator Lever Crash Kit - FiberGlass Stabilizer / 1.6mm - 600 Carbon Fiber Flybar Paddle/3K (H60143) - Skid Pipe H60137 - Servo Linkage Rod HN6037 - Tail Boom HN6063 - New Carbon Fiber Tail Blade - New Landing Skid-Black(H60126) - Align Feathering Shaft - Align Main Shaft - 600 Carbon Fiber Tail Boom/3K - Flybar Rod/440mm (H60108) - Main Drive Gear/170T H60019-03
Looking to learn to fly? With the assistance of an club instructor, the E-flite Apprentice 15e RTF is the perfect trainer to learn the basics and beyond. The Apprentice is a 15-size high-wing trainer that comes with everything you need to go from buy to fly. This one-box purchase includes the full-range DX5e Spektrum radio with the 2.4GHz interference-free technology, AR500 receiver, and a 3S 3200 mAh 15C Li-Po battery and charger. There is no building required just charge and install the included battery, mount the wing and tail and fly. The Apprentice is powered with a 15-size brushless outrunner providing excellent power and performance. This trainer has a flat-bottom wing and produces gentle flight characteristics. The Apprentice is made from durable, lightweight Z-foam making it great for training and sport flying. Every beginner pilot experiences their share of bumps and bruises, so the Apprentices durable build and easily repairable construction ensures more opportunities for success. The Apprentice is the perfect training aircraft thanks to its gentle flight characteristics. This model is equipped with tricycle landing gear allowing better ground handling over tail-dragger aircraft. This landing gear setup is durable and will also allow take-offs and landings on maintained grass runways. This is a high quality trainer with an excellent setup taking the pilot from beginner to basic aerobatics all from this one box purchase. Go from buy to fly with the Apprentice. Features * Completely ready-to-fly * Durable Z-Foam construction * Included DX5e transmitter and AR500 receiver * 3S 3200mAh Li-Po battery included * Li-Po balancing charger included * Tricycle landing gear * 15-size brushless outrunner motor installed * E-flite 30A Brushless ESC installed * All electronics installed Specifications Wing Span: 58 in (1475mm) Overall Length: 37 in (940mm) Wing Area: 525 sq in (33.7 sq dm) Flying Weight: 40 - 45 oz (1135 - 1275 g) Motor Size: 15-size brushless outrunner (installed) Servos: E-flite sub-micro servos (installed) Trim Scheme Colors: White Z-foam with red,black and silver decals Prop Size: 11 x 8 electric (included) Speed Control: 30A Brushless Pro SBC (EFLA1030)(included) Recommended Battery: 3200mAh 3S 11.1V 15C Li-Po (EFLB1040)(included) Approx. Flying Duration: 15 minutes Approx. Assembly Time: 30 minutes Charger: 3S Balancing Li-Po charger (EFLC3010) Experience Level: Beginner and Up Radio: Spektrum DX5e 2.4GHz (included) Assembly Required: Yes. Guarantee Packaging.
The detailed specification of edf r/c plane t50: Material: eps foam Length: 1, 050mm ( 41.33in ) Wingspan: 820mm ( 33.46in ) Height: 380mm ( 14.96in ) Flying weight:: around 1200g Thrust·ªf¦950g Landing gear: electric retract landing gear with gear door system Edf diameter: 70mm , 5 blade Motor: 2650kv brushless motor Esc: 45a brushless esc Servo: 5 x 9g servo Battery: 14.8v 2200mah20c Radio system: 6 ch 2.4g radio systerm The main features of high scale r/c model airplane: 1)6 channel full function radio control(aileron, elevator, rudder, throttle, Retract, canopy) 2)excellent hedgehopping performance; 3)high speed, flying speed at 80mph; 4)flexible to fly with perfect inverted flight, rolls, hoop; 5)one of the best ducted fan jet in the market! 6)steerable nose landing gear 7)rudder helps steer plane on ground on its scale landing gear for easy take off 8)ready to fly in just minutes! 9)super tough, lightweight airframe! 10)perfect appearance and emulation (scale appearance, great attention has been given to details) 11)shock resistant reinforced fuselage and strong wings 12)can take off from ground or hand launched 13)ground take-off can be performed easily 14)excellent flight performance 15)stable inverted flight 16)fuselage with pre-installed electronics, motor, servos, and speed controller 17)superb quality, simply the best rtf jet you can find! 18)fabricated by accurate molds with high fidelity of real airplane 19)one of the best looking jet in the market 20)detailed body structure 21)high roll rate T50 package information: The size of box:960mmx320mmx475mm 2pcs per box. The weight of per box: Arf: 6.2kg; rtf 7.7kg; Arf+radio:7.2kg Arf+battery :6.7kg