Lead-Free Reflow Oven

Model no.Jn-350bs(technological)
External size(l*w*h)4450*1260*1700
Weightapprox. 1800kg
Pcb conveyor system
Pcb conveyor height750a30mm
Conveyor speed0 - 2500mm/min
Conveyor directionl(rl)
Pcb widthmax. 300mm
Conveyor motor power220v ac60w
Transfer slide way angle4-7
Mode of speed regulationfrequency-converter stepless speed regulation
Spray system
Spraying typestep-motor spraying
Solder flux volume20l
Flow control device0-60ml/min
Preheating system
Preheating zone quantity3
Preheating zone length1800
Preheater heating tube220v ac6kw+5.4kw
Preheating temperatureroom temp. ~ 250
Preheating temp. Control pid+ssr
Thermal compensation power1kw
Soldering system
Tin stove volume420kg
Tin stove temperatureroom temp. ~ 400
Tin stove heating tube power220v ac1500w*9
Tin stove temp. Control pid+ssr
Temp. Control accuracya2
Time of tin stove warming up90min
Control type of solder wave heightfrequency-converter stepless speed regulation
Cooling system
Strong wind system370w
Controlling parameter
Power supply3380v 100a 50/60hz
Start-up power9-13.5kw
Normal operation consumption power7kw
Total power rate34kw
Optional item
Servomotor sprayingnitrogen-gas assembly
Industrial pneumatics coolingcompressor icy water cooling
Hot air compensation systemhot air type preheater

HRM-640/840 Lead Free Reflow Oven Features



Streamline shape design make the oven looks great. Touch screen and PLC controlling system .It can save 50 groups temperature parameters and provide extra 2 ports for profile testing.
The software has the functions like , temperature setting and editing, PCB parameter menu, and profile testing, alarms and multi-languages conversion.
Brand electrical component like Schneider (German) breaker, KETE(Korea) SSR, Omron (Japan) box breaker. Meanwhile the CE certificated blower is specially design for lead-free reflow oven. It runs stable and lower noise.
Upper zone and hood can be opened by the electrical screw automatically. It is very convenient for cleaning and maintenance.Electrical pole will hold the upper zone and cover, even when power is off suddently, the cover will not drop down. It's much safer than the air cylinder holder.
Specially designed Ni-Cr heater filaments, provide a very quick ramp up time. It takes just 15 minutes from ambient to setting temperature.
The inner tunnel of the oven is made of stainless steel which easy for cleans.
The entire upper and bottom zones are forced air convection; provide great temperature accuracy and uniform.
Stainless steel mesh belt and pin chain conveyor work together.
Industrial chiller provides better cooling performance.

Features:
1. Lenovo PC , windows 7 operation system, Chinese-English interface screen.
2.All production data will be backup automatically,which is suitable for the ISO9000 management.
3.Fault Intelligent Diagnosis,display alarm and list out.
4.15% heat transferring efficiency was improved ,which is more suitable for the LEAD-FREE welding process.
5.Guide rail is through the special heat treatment, it's hard to out of shape.
6.The main hanging is reinforced, which can avoid the deforming and PCB jamming.
7. Siemens PLC control, more durable and stable.

Product Name
Competitive Price Reflow Soldering Oven PCB Reflow Soldering Machine From China
Model
HS-0802-LF
Specifications about heating system
Quantities of heating zones
Top8 /bottom8
Length of heating zones
3500mm
Quantities of cooling zones
Up 2 ,Down 2
Specifications about conveyor
Width of conveyor
50~400mm
Max width of PCB
400mm
Conveyor direction
R to L (option: L to R) (customized)
Fixing conveyor rail
Front rail fixing/rear rail fixing (customized)
Height of conveyor
900±20mm
Conveyor
Chain conveyor and meshwork conveyor
Conveyor speed
0~2000mm/Min
Specifications about controlling parts
Power
5 line 3phase 380V 50/60HZ with UPS delay power off
Total power
50KW
Start power
26KW
Normal working consume power
Approx. 4.7KW
Heating time
Approx. 20min
Temperature range
Room temperature~~~350
Controlling way
PID closed loop control, SSR drive
Temperature control accuracy
±1
PCB temp. Deviation
±1.5
Abnormal alarms
When temperature is abnormal(too high or too low) & When the PCB board drops
Signal lamp
3 lamps: yellow-rising; green- constant; red- abnormal
Cooling System
Cooling method
Forced air /Air cooler is option
Specifications about machine
Dimensions(mm)L*W*H
5400*1370*1555mm
Weight (Approx.)
2200kg

Features:

1.Use Windows operation interface, easy to operate;
2.Leading heating mode, solve the corner when the reflow soldering welding problem, suitable for CSP, BGA, 0201 chip, and other electrical components of the welding;
3.Professional rotor design, wind speed stability, effectively prevent the PCB heating uniformity of the wind, to the repeated heating of the highest;
4.Compulsory independent loop to various temperature zones, independent PID control, and independent heating mode, make the furnace chamber temperature accurately, even, heat capacity is big.
5.Thermal insulation layer is made of high quality aluminum silicate insulation materials, heat preservation effect is good, warming faster, from room temperature to the working temperature of 15 minutes.
6.Furnace, lead-free green design;
7.High quality high temperature and high speed motor transport wind smoothly, little vibration, low noise;
8.Furnace using cylinder jack-up, safety rod support, safe and convenient;
9.The transmission way of PCB machine adopts automatic electronic speed, chain network ,synchronization, good stability;
10.Special high quality aluminum alloy guide, automatic refueling system, ensure guide rail adjusted the service life of the high precision and wide;
11.Equipped with UPS power protection function, ensure the normal output after power PCB, avoid damage;
12.Powerful software function, the PCB online temperature measurement, and analyze the data curve at any time, storing and printing;
13.PC and PLC communication with PC/PP agreement, stable work, put an end to crash;
14.Automatic monitoring and display equipment working state;
15.Special furnace design, good heat preservation, adopt special heating element, heat with

highefficiency, power consumption of the lowest.

Lead-free solder wire with SGS certificate
Diameter:0.35-6.0mm
Packed in spool or tube, unit weight 1kg, 500g, 250g, 1Lb....
No clean for general soldering
Solid wire, acid cored flux or rosin cored flux 2.0-2.5%

Model
Jaguar m8


Heating system
Number of heating zones
Up 8/bottom8
Length of heating zones
2900mm
Heating mode
Hot air
Cooling mode
Force air





Conveyor system
Max. Width of pcb
350mm
Mesh belt width
400mm
Transmission direction
Lâ??r(or râ??l)
Transmission net height
880â±20mm
Transmission type
Mesh and chain
Range of rail width
0-300mm
Conveyor speed
0-1500mm/min
Auto/manual lubrication
Standard
Upper hood method
Manual(option:auto)
Fixed rail side
Front rail fixed(option: rear rail fixed)
Components high
Top and bottom 25mm








Control system
Power supply
5line 3phase 380v 50/60hz
Total power
40kw
Starting power
38kw
Normal power consumption
4kw
Warming time
About 20 mins
Temp. Setting range
Room temperature-300â??
Temp. Control method
Plc & pc
Temp. Control precision
±1â??
Temp. Deviation on pcb
±2â??
Data storage
Process data and status storage(80gb)
Nozzle plate
Aluminum alloy plate
Abnormal alarm
Abnormal temp. (extra-high/extra-low temp.)
Board dropped alarm
Tower light: yellow-warming, green-normal, red-abnormal

General
Dimension(l*w*h)
4400ã?1100ã?1490mm
Weight
1000kg
Color
Computer gra



y

Model autotek942 lead free soldring station

01 nos/4kg

Model: HFH04
Power supply: ac220v 50hz
Temperature range: 180½450
Iron handle: lf90/lf003
Heating element: ht70/90 (ht70 metal heater)