1) Show accurate angle, the error with the actual angle
Is within 2íp degree.
2) It can suitable for different stature people because it can adjust the length of bracket of the thigh and calf according to requirement.
3) Use microcomputer control so that you can operate it freely and easily, and it also has the functions to memorize the parameter on the bracket angle and speed etc.
4) Can meet the max requirement of patient because it can adjust the active angle and speed at large range.
5) It can link with computer, check the record and save it as much as 52 times.
6) It is safe, reliable and low noise with use low voltage direct current non-carbon brush motor drives.
7) The high brightness digital can display number value such as the angle and timing, it is clear and direct-viewing.
8). It can automatic back and forth.
8. Has the travel transformation pause function.
9. Timing function, when arrived at the set time it will automatically shutdown.
10. With a hand control mouse for patient to control the start/stop in time or change the direction of running when he/she feels uncomfortable.
1. The angle range for knee joint:-5íp~115íp
2. Running rate scope: 0~24mm/s (adjustable continuously)
3. Setting working hours: 0~4 hours
4. Setting automatic round number of times: 0~10 times
5. The pause time when the Work travel transforms:
1-10 seconds
6. Power Supply: AC 110/220V 50Hz/60Hz
7. Voltage: DC24V
8. Rated Power: 60W
9. Load: 15Kg
10. G.W: 19.5kg
11. N.W: 16.5KG
12. MEAS: 89.5X45.5X39.5cm
1. Full-motion CCTV video at distances up to 450-650m when used with any passive transceiver 2. Up to 1500m with any active UTP video receiver 3. Tool-less, installs in seconds, no need to strip the wires 4. NTSC, PAL, and SECAM video formats 5. No power required 6. 60dB crosstalk and noise immunity 7. Compact size easy installation 8. Frequency Response: DC to 8MHz 9. Attenuation: 0.5dB type 10. CMRR: 60dB 11. Impedance: BNC: 75 Ohms Terminal: 100 Ohms 12. Working temperature: -10 to + 70°C 13. Storage temperature: -30 to +70°C 1 14. Humidity: 0 to 95% 15. Dimensions: 180*17*15mm UTP balun features:   1.BNC-M connector, screw push terminal wire, wired more stable reliable   2. No power required, simplified project wiring   3. Plug and play, real-time transmit CCTV video signal, video is clear and stable   4. Anti-interference, super lighting protection, ESD   5.Effective distance: 450-650m (passive)  6.100 pairs a box size: 38x20x20cm Anted electronics works with super quality, satisfactory services All the products from Anted electronics are tested by our QC before being stocked, and most of the hot products are in stock, making it possible to ship within 48 hours for sample, bulk order based on the quantity  Electronics below wholesale Anted electronics offers you competitive wholesale/drop ship prices Anted electronics will be the best choice for customers who has his own business Preferential price is also provided to our regular customers No minimum quantity request! The more quantities you order, the more discounts you will get  Payment: We accept PayPal, western union and bank transfer (T/T)  12 months warranty: All products from Anted electronics are provided with 1 year warranty Refund, return or repair are accepted according to different conditions  OEM, ODM accepted  Fast delivery: DHL, FedEx, UPS, TNT, EMS and Air Mail are available Most of orders will be sent out within 2 business days Before sending, all packing will be checked again to ensure their perfectibility Usually, the lead-time is 3-5 days to the major worldwide countries Characteristic impedance 75 Ohms Frequency range 4GHz DC VSWR �1.30 at DC 1000MHz Insertion loss �0.2dB Working voltage 500V RMS, 50Hz, at sea level Dielectric withstanding voltage �1500V RMS, 50Hz, at sea level Dielectric resistance �5000MΩ Contact Resistance Center contact �1.5mΩ Outer contact �1.0mΩ Durability Mating cycles �500 Parts name Material Plating Body Brass Ni Insulator PTFE - Inner conductor Phosphor bronze Au Coupling nut Brass Ni Gasket Silicone rubber - Ferrule Annealed copper Ni Operating temperature _45 to 85°C Weatherproof rate IP67 RoHS Directive-compliant (2002/95/EC) Compliant by exemption Suitable cable family RG5 cable
1. Full-motion CCTV video at distances up to 450-650m when used with any passive transceiver 2. Up to 1500m with any active UTP video receiver 3. Tool-less, installs in seconds, no need to strip the wires 4. NTSC, PAL, and SECAM video formats 5. No power required 6. 60dB crosstalk and noise immunity 7. Compact size easy installation 8. Frequency Response: DC to 8MHz 9. Attenuation: 0.5dB type 10. CMRR: 60dB 11. Impedance: BNC: 75 Ohms Terminal: 100 Ohms 12. Working temperature: -10 to + 70°C 13. Storage temperature: -30 to +70°C 1 14. Humidity: 0 to 95% 15. Dimensions: 180*17*15mm UTP balun features:   1.BNC-M connector, screw push terminal wire, wired more stable reliable   2. No power required, simplified project wiring   3. Plug and play, real-time transmit CCTV video signal, video is clear and stable   4. Anti-interference, super lighting protection, ESD   5.Effective distance: 450-650m (passive)  6.100 pairs a box size: 38x20x20cm Anted electronics works with super quality, satisfactory services All the products from Anted electronics are tested by our QC before being stocked, and most of the hot products are in stock, making it possible to ship within 48 hours for sample, bulk order based on the quantity  Electronics below wholesale Anted electronics offers you competitive wholesale/drop ship prices Anted electronics will be the best choice for customers who has his own business Preferential price is also provided to our regular customers No minimum quantity request! The more quantities you order, the more discounts you will get  Payment: We accept PayPal, western union and bank transfer (T/T)  12 months warranty: All products from Anted electronics are provided with 1 year warranty Refund, return or repair are accepted according to different conditions  OEM, ODM accepted  Fast delivery: DHL, FedEx, UPS, TNT, EMS and Air Mail are available Most of orders will be sent out within 2 business days Before sending, all packing will be checked again to ensure their perfectibility Usually, the lead-time is 3-5 days to the major worldwide countries Characteristic impedance 75 Ohms Frequency range 4GHz DC VSWR �1.30 at DC 1000MHz Insertion loss �0.2dB Working voltage 500V RMS, 50Hz, at sea level Dielectric withstanding voltage �1500V RMS, 50Hz, at sea level Dielectric resistance �5000MΩ Contact Resistance Center contact �1.5mΩ Outer contact �1.0mΩ Durability Mating cycles �500 Parts name Material Plating Body Brass Ni Insulator PTFE - Inner conductor Phosphor bronze Au Coupling nut Brass Ni Gasket Silicone rubber - Ferrule Annealed copper Ni Operating temperature _45 to 85°C Weatherproof rate IP67 RoHS Directive-compliant (2002/95/EC) Compliant by exemption Suitable cable family RG59 cable
Supplier: ESU pencil, cautery pencil, Electro surgical Control pencil, cable for bipolar grounding pads, cable for monopole grounding pads, bipolar adult-grounding pad, continuous passive mothion, CPM, healing machine, passive exerciser
Cast steel cable protector is made of carbon steel, stainless steel by Investment casting(lost wax casting, precision casting), water glass process, is widely applied to tubing hoop, safety valve protection, sub-sea completions, gauges completions and so on. The body of cable protector adopts investment casting technical and special toughness process. It's strength and reliability could be more distinct with all-cast grade material. Being unique design of smooth streamline, it prevents damage during dynamic motion of the production tubing and ensures continuity and accuracy in the gauges complication. Cable protector can be rapidly and reliably installed with no separate or loose parts or pins, prevents cross threading, and reduces the potential hang up risk. Meanwhile, it demounts easily and allows reinstallation.
Brief Introduction of Wire Mesh Cable Tray Systems: These are thicker and therefore stronger than apparently similar products. Cablofil incorporates a unique T welded safety edge resulting in performance comparable with traditional cable tray but with many added benefits. Features and Benefits of Wire Mesh Cable Trays: 1. Electroplated Zinc Finish 2. Fast Easy Installation 3. Mesh Design Allows Cable Exit or Entry at any point 4. Clear Cable Identification 5. Supplied in 3 Metre Lengths 6. Significant Cost Savings Compared to Standard Tray Products 7. Simple Creation of Fittings on Site 8. Wide Range of Sizes 9. Heights Shown are Internal Dimensions Manufacturing: Optional Material for wire mesh cable tray: Black Steel, Stainless Steel, Aluminium, Alloy, Fibreglass Reinforced Plastic (FRP) Mode: Top curved / Top Straight Surface Finish: Zinc-plating, Hot-dip Galvanizing (HDG), Powder-coated, Pickled & Passivated. Color: Optional Suggestions: 1). MATERIAL The choice of materials is a matter of the physical and mechanical properties produced by each, compared against the intended function, as well as the environment, in which the trays are to be installed. 2). SURFACE FINISH: A). Zinc-plating cable trays are suitable for indoor use. The place where cold zinc-plating cable trays would work should be dry, ventilated, and corrosion free. B). Hot-dip Galvanizing (HDG) cable trays are not suggested for wire mesh cable trays. C). Powder-coated cable trays should be carried out in alkali and salt corrosion free site. D). Pickled & Passivated should be used to stainless steel wire trays. Specification for power and communications cabling containment. 1). SCOPE Steel Wire Cable Tray conforming to the material and performance of this specification. 2). GENERAL A). Cable tray shall be manufactured from steel wires, welded together and bent into final shape prior to surface treatment. B). Surface Treatments: i). Electro zinc plated to BSEN 12329-2000 for interior use (level 2) ii). Hot Dipped Galvanised with between 60 and 80 microns of zinc to BS 729. iii). Stainless Steel AFNOREZ CND 17.2 (AISI 316L) C). Steel Wire Cable Tray Widths & Depths i). Cable Tray dimensions are all internal. ii). Depths of 30mm, 54mm, 80mm, 105mm & 150mm iii). Widths of 50mm, 100mm, 150mm, 200mm, 300mm, 400mm 450mm, 500mm & 600mm for depths of 30mm & 54mm. iv). Widths of 100mm, 150mm, 200mm, 300mm 400mm & 500mm for Depths of 105mm & 150mm All trays are of 3005mm long 3). SPECIFICATION a). Steel Wire Cable Tray will be produced from lateral and longitudinal sidewall steel wires, with minimum diameters of -: 4 mm for trays of widths up to 150mm 4.5 mm for trays of widths of 200mm 5.0 mm for trays of widths of 300mm 6.0 mm for trays of widths of 400mm, 450mm, 500mm and 600mm b). Trays will be manufactured with a longitudinal 'T-welded' safety edge along the top wire of the sidewall (excluding CF3050) c). Trays will be constructed with a 50mm x 100mm mesh configuration. d). All tray fittings (e.g. changes in direction, level and size) shall be constructed on site, to the manufacturers instructions, using side action bolt croppers and fastened using 25mm and 30mm counter clamps with M6 bolts and nuts, all surface treated as the tray. e). Trays will be coupled together using either a fast spring coupler or a 25mm/30mm counter clamp combination with supporting lateral splice plate on trays over 300mm width. The coupling will have the same surface finish as the tray. f). Trays shall be supported at a maximum span of 2.5m by trapeze, wall, floor or channel mounting methods and will not exceed maximum loads as specified by the manufacturer. g). All welds will be manufactured to an average minimum tensile strength of 500Kg per weld. 4. TESTS, CERTIFICATION AND CONFORMITY a). Loading and deflection characteristics of the tray should be tested and the results published in accordance with the European Standard CEI/61537. b). Suitability for the support of Cat6 data cabling should be demonstrated by way of independent test verification. c). Fire test certification should be published in accordance with the E30/E90 standard. d). Electrical continuity across a coupling should be demonstrated by means of a published test method and result. We are able to design styles in various specifications according to the drawings and/or samples by the clients. And we offer fair price, excellent quality, quick delivery, continuous improvement. We own customer satisfaction. You can trust on us that we are the leading manufacturer of cable trays. PSC
Description of square swing screen The� square swing screen is a high-efficiency screening equipment with high precision and large output. It has excellent self-cleaning effect, high utilization rate of screen and long life, and good sealing effect. Working principle� of square� swing screen From the perspective of the trajectory of the sieve body, that is, the sieve movement of the sieve box, the square type swing screen is also called the reciprocating screen. The vibration force generated by the driving device is an inertial force that changes in a certain direction around the axis and the direction is eccentric. The reciprocating inertial force formed by the rotation of the fixed axis. According to the structural characteristics and working principle of the square swing screen, the screen surface is generally horizontal or slightly inclined (inclination angle is 0�°~5�°). The working principle of the square swing screen is that after the sieve machine is started, the sieve shaker, that is, the sieve box, reciprocates back and forth under the action of inertial force, and the sieve box drives the sieve surface to periodically shake, so that the material on the sieve surface is matched with the sieve box. The plane rotary motion is used together. During this period, the material smaller than the aperture of the sieve surface falls through the sieve hole to the lower layer, and becomes the undersize material. The material larger than the aperture of the sieve surface is discharged from the discharge opening after continuous rolling and jumping movement, and finally the screening work is completed. Features� of square� swing screen Large screen size, unique multi-layer grading design, one machine is divided into two groups, one is used in multiple units, and the output doubles. The fully enclosed structure, the dust is not flying, the sieve machine has low vibration and low noise, and meets environmental protection requirements. Flexible screening, the acceleration is 4-5 times lower than that of ordinary vibrating screen, and the service life is increased, thus reducing maintenance costs. Changing the net is more convenient, simple to operate, firm and reliable. Large electrostatic spray molding process, the equipment is more beautiful, wear-resistant and rust-proof. Application of square swing screen: Widely used in chemical and new materials, metallurgy, metal powder, mineral powder, food, salt, sugar, abrasives, feed and other industries. The rotary motion of the exciter is transmitted to the screen surface through the square rotary screen, so that the material is rapidly dispersed in the front part of the sieve machine, thereby achieving efficient screening.
Product description Xinxiang sanyuantang machinery co., LTD. absorb the advantages of domestic vibrating screen, carefully designed and manufactured. This tybe machine looks beautiful shape, reasonable structure and excellent performance, and is the high-quality product of the sieve machine. SYT series screen is a high precision fine screening machine, the low noise,high effciency raplace mesh screen fast, only need 3--5 minutes. fully closed structure, suitable for powder, particle, mucus and other materials screening filter. basic function Sifting: sifting is the particle, powder into different sizes of the particle segment. Can continuously separate 2-6 particle size and control a narrow range of particle size. Screening out impurities: high precision mesh can quickly remove large or small particles with low content in the process of high flow material treatment. Solid - liquid separation: three - dimensional vibration, high precision screen filtration can quickly remove all kinds of slurry insoluble solid substances. Application scope Chemical industry: resin powder, pigment, washing powder, powder, paint, soda ash, lemon powder, etc. Abrasive, ceramic industry: alumina, quartz sand, mud, spray soil particles. Food industry: sugar, salt, alkali, monosodium glutamate, milk powder, soybean milk, yeast, juice, soy sauce, vinegar, etc. Paper industry: coating coating, white clay mud, black and white liquid, waste liquid, paper liquid, waste water recovery. Metallurgy industry: titanium oxide, zinc oxide, electromagnetic materials, metal powder, electrode powder, etc. Vibrating screen description It supports at most� 5 layers. But� 3 layers� is highly recommended. It has 4� available material,all stainless steel 304� or� 316� or� contact part sus304� or� carbon steel Q235A. The voltage is supported to be customized.� 220/240/380/415/450V� are all available.50 or 60HZ. With large capacity,small volume, igh screening efficiency,easily changed screen and good safe performance. Rotary vibrating screen machine is widely used for screening,grading and filtering, separating and classifying and sieving of powders,pellets, granule. It has been used in Food,Chemical, Construction,Paper-making,Metallurgy and mining, Abrasive and ceramic industry etc.� It is composed of vibration motor,basement support,screen frame,inlet and outlets, dust-proof cove.Features of Vibrating screen machine 1, Function:Screening and filtering any powder or particle material or liquid. 2, Movement Locus:Upwards,Left and Right Motion,Rotation Motion. 3, Sieve Layer:1-5 Layers,the 1-3 layers is better. 4, Screen Size Range:10mm-500 mesh. 5, Driven Mode:Vibration Motor Driven.