Haul-off
Haul-off two pipes separately
Printing before Cooling
Printing changing meter number
Showing Production speed
U-pvc, c-pvc extrusion line Gf series pipe extrusion line is applicable to produce water transfusion pipe and drain pipe for agriculture and constrction , underground installation pipe for wire and cable .As well as various kind of diameter and wall thichness pipes .The line could be provided by conical (parallel option ) twin screw extruder\vacuum sizing tand\haul-off\cutter\stacker etc.Units .Extruder and haul-off assembled by import a.C. Inverter, as well as the good quality vacuum pump and motor, there are two-clamp style for haul-off and three-clamp, four-clamp, six-clamp option.There are saw blade cutter and planetary cutter for option and including length metering device and thickness increasing device , reliable and higher productivity , providing the special device to produce internal spiral rib pipe, internal hollow pipe, core layer foaming pipe
Description of PPR Pipe Extrusion Line: Diameter Scope: 20mm-160mm PPR pipe introduction: We designs and develops PPR pipe production line and gas pipe production line by itself. Plastic Pipes that are produced by this line have excellent stiffness, energy-saving insulation and non-toxic, health performance so on. It has become the first choice for the hot/cold water pipe. Technical Introduction Firstly, put PP-R material and other assistant material into the mixer and mixing the material symmetrically, then feed into the hopper, at the same time heat extruder and keep the temperature, and the material is melt and plasticizing by extruder, then extruded by die and head and goes into vacuum calibrating device, and cooling and calibrating, then draw-off by haul-off machine, then printing word by ink jet printer, then put into automatic cuter to finish the automatic cut according to pre-establishing length and stacking into the shelf. And the eligible product is packed and put into storeroom, and inferior product is crushed and recycled. This pipe extrusion line mainly includes single screw extruder, molds, vacuum calibrating water tank, spray water cooling tank, haul-off machine, cutting machine (or winder) and overturning bracket.
Description of SBG500 HDPE/PP Double Wall Corrugated Pipe Extrusion Line: Diameter scope: (ID) 200mm-500mm Double wall corrugated pipe line Features: The corruated pipe production line is developed with the ninety times advanced technology of West Europe by our company. The machine is equipped with double tube single-control stainless steel spraying shaper to form a production line. It avoids a waste condition when one tube is adjusted and the other one is affected. The auto single-control double haul off and cutter are combined with the front shaping technology to make operation more flexible. Let you enjoy economic benefit which is brought about by separately control double-tube extruding. It can make fully use of the extruding capacity of the extruder. Even if it produces small diameter pipe,it can get great output,too.
Pe-xa pipe extrusion line PE-X pipe is a green pipe, not pollute environment, not contain prison, and not release harmful matter, only produce water and carbon dioxide after burning. Applicationof PE-X pipe includes indoor water-supply pipe, hot water pipe, pure water pipe, the liquid food sending pipeline in the food industry, heating system of the hot-water heating central, air conditioner pipeline system, telecommunications, electroplate, petrol eum, chemical sending pipeline system and etc. This PE-Xa pipe hasbeen approved by national buliding materials monitoring center, has reached the advanced level of the same product in the world. Technical flow: Raw material -- mixing -- feeding -- plunger extruding -- printing -- cooling --haul-off -- measuring -- winding -- cut-to-length -- inspection -- package
Description of PVC Water Pipe Extrusion Line: Qingdao HUASU Machinery Fabricate Co., Ltd designs and develops PVC pipe extrusion line especially for PVC water supply and disposal pipe. PVC water pipe extrusion line is specializing in manufacturing PVC,CPVC and UPVC pipes of different diameter and thickness. They are applied to agricultural and construction water supply and drainage, overhead or underground wire and cable. Due to the special characteristics of the CPVC plastic pipes, they are widely used in the fields of crude oil transportation, pipe lines of chemical industry which require high temperature and corrosion resistance, hot and lukewarm water supply and drainage system, directly buried pipes of high and extra high voltage electricity, protection sleeves of wires and cables, etc. High quality steel materials, strict producing process makes high quality line. This PVC pipe extrusion line mainly consists of conical twin screw extruder, PVC pipe molds, vacuum calibrating water tank, water spraying cooling tank, haul-off machine, cutting machine and overturning bracket.
Description of PVC Fiber Enhancing Hose Extrusion Line Feature: PVC Fiber Enhancing Hose extrusion line ( PVC fiber reinforced pipe production line ) is a special complete set of equipment for producing PVC fiber enhancing hose. This pipe is non toxic, transparent, pressure endurable, anti-stretching, and acid resistance, corrosion resistance, good appearance, soft light, and durable. The middle layer of this PVC fiber hose is Terlene fiber network, which has good chemical and physical property. It is mainly used for the transportation of high pressure or corrosive gas, and it is widely used in food and health industry. Also it is good pipe for air, water, gas, oil and other liquid, gas in the temperature from -5 to 65. This PVC fiber reinforced pipe extrusion line consists of extruder, water-spraying tank, hauling-off unit, fiber-rolling unit, coiler, etc. It features reasonable configuration, unique structure, reliable performance, easy operation, convenient maintenance, high continual capacity, etc. It receives deep welcome and trust from clients.
Description of PE Gas/Water Supply Pipe Extrusion Line: Diameter Scope: 20mm-1200mm We designs and develops HDPE/MDPE gas and water supply pipe production line by ourselves. This pipe production line has many features, such as: special structure, high degree automation, easy operation, continuous produce stable and reliably and so on. It is also applicable for high speed extrusion of PE,PP,PPR,PERT,ABS etc. The outstanding characteristics of this production line is that it can not only produce the pure PE pipe complying with the international standard, but also produce the wire reinforcing composite plastic pipe. Plastic Pipes produced by this line have excellent stiffness, flexibility, high mechanical strength, resistance of environmental stress cracks, resistance to creep deformation, heat-linkage and so on. It has become the first choice for the city gas pipe and outdoor water pipe. The whole production line, from charging to stacking shall be controlled automatically by PLC, having high reliability, easy operation and maintenance. With this extrusion line, a layer or multi-layer high strength wire such as steel wire, glass fibre and polyester fibre may be winded do existing pure PE pipe to increase the pipe working pressure to 4MPA. HDPE/MDPE pipe extrusion line mainly includes single screw extruder, molds, vacuum calibrating water tank, spray water cooling tank, haul-off machine, cutting machine and overturning bracket.
PVC Pipe Line DETAILS INTRODUCTION: PVC pipe material production line is mainly used in the area of agricultural water supply system, architectural water supply system, pavement of cables, etc. as well as PVC pipe material of all sorts of pipe caliber and wall thickness. This machine group consists mainly of twin conical (parallel) screws extruder, vacuum calibrating tank, haul-off unit, cutting unit, tilter, etc. single screw extruder and haul-off unit have applied imported A/C inverter, both vacuum pump and driving motor have applied excellent products. The drawing machine includes two-claw type, three-claw type, four-claw type, six-claw type, eight-claw type, etc. Saw cutting or planet cutting can be applied, it is additionally applied with length measuring meter and thickness increasing device, the property of machine group is reliable, the production efficiency is high. TECHNICAL PARAMETER (FYI): SPECIFICATIONS FOR PVC PIPE PRODUCTION LINE ModelPipe Diameter Range(mm)ExtrudersMax Output(kg/hr)Max Speed(m/min)Total Power (KW)Line Length(m ) PVC-50X216-50SJSZ 51/ 10515066020 PVC-6316-63SJSZ55/11 13215066024 PVC-16063-160SJSZ65/132300510024 PVC-250110-250SJSZ80/1564003.512028 PVC-315160-315SJSZ80/156400316028 PVC-450250-450SJSZ92/1887001.520036 PVC-630315-630SJSZ92/1887000.923036 -
Types and Design of HDPE Pipes HDPE pipe is a flexible plastic pipe made of thermoplastic high-density polyethylene widely used for low-temperature fluid and gas transfer. In recent times, HDPE pipes got their extensive uses for carrying potable water, hazardous wastes, various gases, slurry, firewater, stormwater, etc. The strong molecular bond of HDPE pipe materials helps it to use for high-pressure pipelines. Polyethylene pipes have a long and distinguished service history for gas, oil, mining, water, and other industries. Due to its low weight and high corrosion resistance, the HDPE pipe industry is growing tremendously. In the year 1953, Karl Ziegler and Erhard Holzkamp discovered high-density polyethylene (HDPE). HDPE pipes can work satisfactorily in a wide temperature range of -2200 F to +1800 F. However, the use of HDPE Pipes is not suggested when the fluid temperature exceeds 1220 F (500 C). Types of Pipes HDPE pipes are made by the polymerization of ethylene, a by-product of oil. Various additives (stabilizers, fillers, plasticizers, softeners, lubricants, colorants, flame retardants, blowing agents, crosslinking agents, ultraviolet degradable additives, etc.) are added to produce the final HDPE pipe and components. HDPE pipe lengths are made by heating the HDPE resin. It is then extruded through a die, which determines the diameter of the pipeline. The Pipe wall thickness is determined by a combination of the die size, the speed of the screw, and the speed of the haul-off tractor. Usually, 3-5% carbon black is added to HDPE to make it UV resistant, which turns HDPE pipes black in color. Other color variants are available but usually not used frequently. Colored or striped HDPE pipe is usually 90-95% black material, where a colored stripe is provided on 5% of the outside surface. Properties of HDPE Pipes The physical and mechanical properties of a typical HDPE Pipe are listed below: Governing Codes: ISO 1183, ISO 4427, AS/ NZS 4130, BS EN 12201, EN 12056, AWWA C901, AWWA C906, etc Available size range: DN 16 to 1600 (However, other customized sizes can be manufactured) The density of HDPE Pipe: 930-970 kg/m3 Typical Mechanical Properties of HDPE Pipe are given in Table 1 below. However, these values vary from one manufacturer to another. So, must be consulted with the manufacturer. Mechanical PropertiesHDPE PropertiesYield Strength18-26 MpaElongation10%Elastic Modulus900 MpaHardness61 Rockwell (Shore)Poisson's Ratio0.45Linear Coefficient of thermal expansion0.17 mm/m-0CBrittleness temperature