Aluminium Foil Container

Complete Automatic Aluminium Foil Container Making Machine   Model: SEAC-80/110AS (Four Cavities or Five Cavities Capacity !)  Units: Automatic Feeder+Automatic 80Ton H Type Press+Cavities Mould+Auto Stacker+Scrap Sucker & Auto Presser.     It fit for all common size Aluminum Foil Container production requested. The Big capacity could to cover big range of size products. Lower power requested than other old model machines.   Specification:   1.Raw material: Aluminum foil; Thickness: 0.030mm ~0.280mm;      Alloy: 8011,8006,3003,3005; Temper O to H24;   2.Good Japan's Inverter, PLC and 10inch Touch Screen control system;   3.Max. width of Aluminum foil: 1200mm;   4.Max. diameter of Aluminum foil: 800mm;   5.Core diameter of Aluminum foil: 76mm(152mm as Optional );   6.Working speed: 40-68 times/min;   7.Total Power: 14kw+2kw+2.5kw+3kw;   8.Compressed air needed: 0.5- 0.8 Mpa, 0.4m3/min;   9.Install dimension: 6400*2600*3600mm;

We CHOCTAEK machine and mould have been deliveried to 35 countries, such as Italy, UK, India,Spain, Macedonia, Brazil, Colombia, USA, Australia, Algeria, South Africa, Korea, and so on. Till 2019, we designed 4 kinds of aluminum foil production lines:45T,60T,C1000,C1300; developed and produced 1580 sets aluminum foil container moulds which are in different sizes and shapes since 2003. More advantages: 1. The tension of expansion shaft is controlled by ultrasonic, which can detect diameter of alu. foil roll and adjust the brake tension automatically. 2. The operating control panel is equipped with a large touch screen(SIEMENS) allowing quick set up of machine parameter and visualization of production flow. 3. The key electrical appliance adopt great elements in famous brand, such as SCHNEIDER, SAMCOfrom Japan etc. 4. A huge movable bed plate on Aluminium foil container making machine is equipped in this strong aluminium foil press, so it is easy and convenient to load the mould. 5. High precision sensors (SICK) are installed with this Aluminium foil container making machinery to ensure high sensibility and precision. 6. The press can be equipped with moulds for both wrinkle wall and smooth wall container production.

The C1300 press has been designed and developed exclusively for the production of aluminum food containers, dishes and trays. These products are obtained by blanking and forming of aluminum which has been unwound from a coil. The C1300 press is a â??Hâ??-frame press with 80-ton capacity. The large working bedplate of the press is equipped with two removable supports with adjustable height to facilitate changing the tools while protecting the surfaces of the press. This permits the press to use standard tools as well as tools designed with air cylinders below the bottom plate. The press uses one brushless motors to feed the aluminum strip allowing accurate control of step and speed. The height of the feeding system is manually adjustable to match the strip height of the tool currently in use on the press. There are electronic cams (solenoid valves) controlled by a PLC and fixed air connections with pressure regulators, providing easy tool set-up. The C1300 press is equipped with two compressed air tanks. The pneumatic control panel is easily accessible during operation of the press. The press may be equipped with tools for wrinkled-wall and smooth-wall, container production. If you are intrested in our aluminum foil container making machine and mould, please contact with us.

The production line of food container of aluminium modle:ctjf-40t The productivity is 40-70 per munite, that is, this production line can produce 40-70 products per minute.(it depends on the productions complexity and size.) the fastest speed is 70 products per minute.Every mould has one cavity.If the product is small, a mould has two or more cavities. This prodution line is composed of the followings(note1), 1. An auto-lubricated feeder(note2) 2. An eletronically controlled panel 3. A length controller 4. A 40t pneumatic punch 5. A set mould of food container which is vertical curl or full curl. 6. A automatic conveyor(with a carbore which can be filled the resting foil) 7. A collector of finished product 8. A machine which assist to change die 9. A machine which assist to change foil Note: 1.This production line is electrification integration, and centralized control.It is totally controlled automatically.Worker just collect the finished products. 2.The width of foil feed system is 520mm.(basic model) 3.The lenth of feeding foil is controlled by computer. You can regulate the length form 30mm to 999mm. 4.As we can manufacture the machine according to the productsí»s size as they required, the outer-appearance of the machine is a little bit different. The procedure of production line: Raw material:aluminium foil-->auto-lubricated feeder-->pinch head controller-->40-t precise presser--> mould-->collect product by hand (or auto-collector)-->packing

Since 2003, CHOCTAEK has been specialized in producing aluminum foil container mould, aluminum foil container production lines and other relatives machines. We are keep researching and developing machines and moulds to fulfill the integration and full-automation of aluminum foil container production. Till to May 2019, we have developed and produced 1580 aluminum foil container moulds which are in different sizes and shapes. We have exported machines and moulds to more than 35 countries and offer service to 90 companies. We continuously offer technical support and consulting service to new customers. CHOCTAEK always pay attention on your requirement and concern your companys development. We make every effort to improve our technology &quality, to ensure to offer you machine and mould in best quality and technical service. We requite your expectation and support in the way of upgrading technology continuously. CHOCTAEK will satisfy your specific demand.

Supplier: Aluminium foil container machine and dies
Services: Manufacturers
Buyer: Aluminum foil

Semi automatic Aluminium Foil Container Making Machine This equipment produces all kinds of aluminum foil containers, is suitable for AL-foil thickness 0.03-0.40mm, width of feeding is 540-1050mm. This equipment S advanced design lies in: 1. Contain oil the AL-foil. Feeding AL-foil. Waster packing, stacking during production, and the electric part of the line adopts PLC control, has realized the non-humanization production which completely the aluminum box stamps out, thus enhanced operatorsSecurity greatly. 2. Widened the aluminum foil material use width, has carried on the high accuracy rationalization layout to the multi-cavity mold, raised the aluminum foil material use factor greatly. 3. The advanced production processing craft as well as the precise technique of manufacture cause the product quality which this equipment produces to be higher. Every part function specification: Electric panel: Electric control assembly Uncolier unit: Oil AL-foil double-face, and than roll out Waster packing: Packing the waster Aluminum foil Stacking: Automatic stacking the products Press machine: Press the host machine This equipment accept "independent operation, comprehensive management" concept to run every movement part, make each moving part is related but not interfere with each other, PLC for processing all the feedback inform.

Disposable Aluminium Foil Dishes Making Machine Each machine consists of: -1 Unit Press / Punching Machine -1 Unit Aluminum Foil Feeding Machine -1 Unit Conveyer Belt -1 Unit Receiving Table -1 Unit Automatic Scrap Collecting System -1 Unit Air Compressor System -1 Unit Aluminum Foil Test Roll -1 Unite Manual Operation Lifer-Loading/Unloading Material and Mould -1 Unit Digital PLC Computerized Panel Control After-sales Service Provided:Engineers available to service machinery overseas -With Auto counting stacker, aluminum foil container could count and stacked automatically. -Manual setting of the aluminum foils feeding length from 20 to 999mm by you. -With automatic lubrication system and aluminium foil material could lubricate automatically. The features are feeding accuracy, coating even, saving material, high accuracy, neat appearance, small size, easy to install, operate, maintain, little noise, as a result, it is the ideal equipment for aluminum food containers & hardware products and so on. Optional Consist for the Food Container Machine

Supplier: Ceiling tiles machine, uncoiler, straightener & servo feeder, aluminium foil container machine