Extruder

1 on the basis of high quality in the high-speed, high-yielding out. 2 low-temperature plastics design concepts to ensure high-quality products out. 3 two bands of the overall design, function to strengthen plastics, and ensure high performance out of adjustment. 4 special barriers, bm mixing integrated design to ensure that the materials mixing effect. 5 high-torque output, the major thrust bearing. 6 gear, as high-strength alloy steel shaft, carburizing, grinding teeth treatment. 7 high hardness, high-quality finish, ultra-low noise. 8 plc intelligent control, can realize the linkage between the main auxiliary. 9 easy to monitor the human-computer interface to facilitate understanding of processing and machine status. 10 need to be replaced under control (temperature control instrumentation). 11 material for 38 crmoal / a nitride treatment, wear-resistant. 12 strict temperature control accuracy and integration of cooling water-cooled air-cooled. 13 unique to the material i design, with perfect water-cooling device. 14 feeding with ditch at the end of the lo sets of cones with enhanced feed function, high yield and high-speed extrusion provided a guarantee.

1. Low libration. 2. Low noise. 3. High reliability. 4. Excellent printing device. About 3 tons

HDPE/PP/CPVC Double Wall Corrugated Pipe Extrusion Line-SBG63 Introduction: 1. Diameter Scope: (ID) 32mm-63mm 2. Double Wall Corrugated Pipe Line Features: In order to meet the demand of plastic pipe market,HUASU Company designed and developed this Double Wall Corrugated Pipe Extrusion Line by technology Innovation. SBG63 adopts directly extrusion (single extruder or two extruders co-extrusion) and forming technology. It makes high automation degree,reliable quality and stable production become true. Extruder: High speed and efficiency single screw extruder, grooved barrel, equipped with the lower noise fan, high speed and hard gear reducer. It can make the inner and outer layers produce different material and guarantee high efficiency extrusion. Die Head: It adopts spiral type special structure design,small volume,and clean flow. This structure can effectively eliminate internal stress of corrugated pipe, remove the weld pipe vestige,and make the corrugated pipe inner and outer layer wall thickness even and forming stability. Corrugator: Corrugator adopts chain type transmission,equipped with open water cooling system. It greatly increases the production speed. Mold Blocks moving adopts advanced synchronous upper and lower mechanical drive system. It assures moving accuracy and plastic pipe quality stability. Advanced self-lubricating system makes the forming molds and mold plates abrasions minimize and greatly extend the service life. Winder: Torque motor, single/double station automatic winder. Control System: This production line adopts SIEMENS PLC control system,color touch screen human-machine interface,reliable running,easy operation,remote communication function which can realize remote fault diagnosis and rule out the possibility. Or adopts normal control system according to customer's requirement.

Jintech twin screw extruder

Extruded Safety fence made by polyethylene resins,Used as a visual barrier for marking boundaries around work zones and environmentally sensitive areas. * Color: Orange * Material: High density polyethylene PROPERTY Unit BR80 BR100 BR120 Standard height cm (ft) 122 (4.0) 122 (4.0) 122 (4.0) Standard lengths m (ft) 30.5 (100) 15.2 (50) 30.5 (100) 15.2 (50) 30.5 (100) 15.2 (50) Tensile strenght(MD) KN/m 2.29 4.01 3.03 Tensile strenght KN/m 0.55 0.71 0.98 Roll Weight kg (lb) 3.16 (6.4) 1.58 (3.2) 3.72 (8.2) 2.27 (5) 4.47 (9.8) 2.24 (5) Mesh Size mm 110 X 26 100 X 26 100 X 26

Description of PVC Water Pipe Extrusion Line: Qingdao HUASU Machinery Fabricate Co., Ltd designs and develops PVC pipe extrusion line especially for PVC water supply and disposal pipe. PVC water pipe extrusion line is specializing in manufacturing PVC,CPVC and UPVC pipes of different diameter and thickness. They are applied to agricultural and construction water supply and drainage, overhead or underground wire and cable. Due to the special characteristics of the CPVC plastic pipes, they are widely used in the fields of crude oil transportation, pipe lines of chemical industry which require high temperature and corrosion resistance, hot and lukewarm water supply and drainage system, directly buried pipes of high and extra high voltage electricity, protection sleeves of wires and cables, etc. High quality steel materials, strict producing process makes high quality line. This PVC pipe extrusion line mainly consists of conical twin screw extruder, PVC pipe molds, vacuum calibrating water tank, water spraying cooling tank, haul-off machine, cutting machine and overturning bracket.

As high-performance vacuum extrusion equipment, it is largely used in extrusion forming of various hollow bricks made from coal gangue, shale, coal dust and other industrial solid wastes. It is permitted to be produced with German KWS technology according to German standards and is authorized to use German trademark of GFK. It is equipped with an upper reducer that adopts hardened faced gears, and a lower planet-gear speed reducer, and is one of the most advanced vacuum extrusion equipment in the world. Sea-container package

Clay Brick Making Machines are perfect for producing red clay bricks with a comprehensive range of features. It is made with 18 Ton weight and is certified with ISO 9001. This machine provides a capacity of between 10000-20000 B/hr, allowing for efficient and reliable red brick manufacturing. The main function of the Clay Brick Making Machines is to make red color clay bricks. It is a fully automatic clay block making machine and clay brick production line which is designed for providing high quality and durable clay bricks. The Clay Brick Making Machines are equipped with advanced technology and features such as automatic brick forming and auto pallet feeding, allowing for easy and smooth production of red bricks. It is an ideal solution for red brick manufacturing businesses that are looking for a reliable and cost-effective machine to produce high-quality red bricks. The Clay Brick Making Machines are designed to be energy efficient and provide a low cost of production. With its advanced and innovative technology, the Clay Brick Making Machines are the perfect choice for any red brick manufacturing business. This machine is designed to be durable and reliable, making it an ideal choice for producing red bricks efficiently and cost-effectively. It is the perfect solution for producing high-quality and durable red bricks. JKY55 Double Stage Vacuum Extruders can extrude out the materials into the mud column at the vacuum condition. The working pressure is 0.092MPa, extruding capacity can be 20000 bricks per hour, calculated as 240*115*53mm standard solid bricks. Raw materails can be clay, shale, coal gangue, river sludge, contruction waste, etc. Double stage vacuum extruders are the perfect choice for the clay brick manufacturers.

Product Description model no: JDL65/132 main motor power: 37kw weight: 4000kg heating mode: electric heating cooling way: air cooling extrusion width: 800-1350mm extrusion thickness: 0.8-5.8mm capacity: 100-160kg/h price: 45000 USD/SET Features: 1.The characteristics of the machine is advanced design, high quality, good plasticizing and low energy consumption. 2.It has the advantages of low noise, smooth operation, large loading and long life.3.The technology can be adjusted according to customer's raw material. type diameter(mm) L/D screw speed(r/min) motor power (kw) capacity(kg/h) JSJ52/100 50.5 28-40:1 500 45 150-250 100 7-12:1 85 37 JSJ65/150 62.4 28-40:1 500 55-75 500-700 150 7-12:1 85 45-55 JSJ75/180 71 28-40:1 500 90-110 750-900 180 7-12:1 85 55-75 JSJ95/200 92 28-40:1 400-500 250-315 1000-1200 200 7-12:1 85 75-90