Ys-Fwt Gateway (Ys-Ft2008-8)

We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.

At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.

The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%


From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:

Waste code: 10 02 10

The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.

Chemical analysis of the material is available on request.

[Technical Indicators]
1. Industrial grade
Indicator Name/Indicator Value Powdered Products (F) Needle Products (Z)
Level 92 Level 93 Level 95 Level 92 Level 95
Appearance White or light yellow powder, without caking White or yellowish needle-like, without lumps
Active matter,% 92.0 93.0 95.0 92.0 95.0
Free oil,% 1.2 1.2 1.2 2.0 1.5
Inorganic salt,% Sodium sulfate 5.8 4.8 2.5 4.8 2.5
Sodium chloride 0.15 0.15 0.15 0.15 0.15
Moisture,% 2.0 2.0 2.0 4.0 3.0
PH value (1% aqueous solution) 7.5-9.5 7.5-10
Whiteness (WB), 90

2. Toothpaste grade
Indicator Name/Indicator Value Toothpaste Grade (Y)
(I) Level (II) Level (III) Level
Appearance White or yellowish powdery or needle-like, without caking
Active matter,% 95.0 93.0 93.0
Free oil,% 1.2 1.2 1.2
Inorganic salt,% Sodium sulfate 2.5 3.2 4.0
Sodium chloride 0.15 0.15 0.15
Moisture,% 2.0 2.0 3.0
PH value (1% aqueous solution) 8-9.3 8-9.3 8-10
Whiteness (WB), 90
Foaming capacity/mm 180
Heavy metal (as Pb)/ (mg/Kg), 15
Arsenic content (as As)/ (mg/Kg), 3
Total bacterial count/ (CFU/G), 100
Total number of molds and yeasts/ (CFU/G), 100
Fecal coliforms/G Not to be detected
Pseudomonas aeruginosa/G Not to be detected
Staphylococcus aureus/G Not to be detected
 
3. Latex grade
Indicator Name/Indicator Value Latex grade (powder, needle, liquid)
Aggregate grade Seed level Liquid K12
Appearance White or yellowish powdery or needle-like, without caking Light yellow transparent liquid
Active matter,% 94.0 92 28.5-30.5
Free oil,% 0.8-1.0 1.5-2.0 1.5
Inorganic salt,% Sodium sulfate 3.0 3.0 1.5
Sodium chloride 0.15 0.15 0.05
Moisture,% 3.5 3.5 -
PH value (1% aqueous solution) 8-10 7.5-9.5
Whiteness (WB), 90 -
Color Klett (30% active), - 60

4. Reagent grade
Indicator Name/Indicator Value Reagent grade
Level 99% Level 97%
Appearance White flaky crystals White powder
Solubility (1%, alcohol) Completely dissolved
Solubility (10%, aqueous solution) Completely dissolved
Chroma APHA (20%, deionized water), 15   -
Active matter (%), â?¥ 99 (on dry basis) 97
Petroleum ether soluble matter (%), 0.2 1.0
Sodium sulfate (%), 0.5 1.5
Sodium chloride (%),
Moisture (%), 1.0 2.0
PH value (1% aqueous solution) 6.0-8.0 6.0-11
Phosphate, 1ppm -
Lead (Pb), 2ppm
Iron (Fe), 1ppm
Nitrogen, 5ppm -
Arsenic (As), 0.1ppm
Fraction content (%), 99.0
Absorbance (3%, deionized water) 230nm 0.4
260nm 0.1
280nm 0.1 -
410nm 0.01

Commodity : Soda Ash Light / Dense
Molecular formula:na2co3
Molecule weight:105.99
H.S Code:28362000
Cas: 497-19-8

Properties : white crystal powder, easily soluble in water, water solution is alkali. Easily absorbing moisture and co2 if exposing in the air.

Applications: mainly used in glass-manufacturing, chemical industry, metallurgy, paper, dye, synthetic washes and petrochemistry.

Packing :25kg/ 40kg/50kg/750kg pp woven bag with waterproof pe inner , two layers

Specifications standard : gb210.1-2004
Items : specification
First grade : specification
Second grade
Total alkalinity(as na2co3 in dry base) %99.2% min98.8% min
Chloride content(as nacl) %0.7% max0.9% max
Iron content(as fe in dry base) /%0.003% max0.0035% max
Sulphate content(as so4 in dry base) /%0.03% max0.03% max
Water insoluble matter /%0.03% max0.03% max
Loss on ignition a/ %0.5% max0.5% max

Potassium Monopersulfate compound, a white, free flowing crystalline granule, is non-toxic, odorless, and easily soluble in water. It is an efficient, environmentally friendly, and multifunctional acidic oxidant.
General Information
Product Name Potassium Monopersulfate compound
CAS 70693-62-8
Chemical formula 2KHSO5 KHSO4 K2SO4
Molecular weight 614.7


Specification
Appearance White, free flowing granule
Available Oxygen, % 4.5
KHSO5,  % 42.8
Loss on Drying  % 0.15
Bulk Density, g/L 0.80
pH (10g/L,25 C) 2.0 .4
Sieve Residue on 75 m test sieve, % 90.0

Packaging
Product is packaged in plastic woven bags lined with polyethylene film, with a net weight of 20kg/bag or 50kg, or the packaging form and net content can be determined through negotiation according to customer requirements.

Storage
Store in a cool and well ventilated warehouse to prevent exposure to sunlight, rain, and moisture. Prohibit mixing with reducing substances for storage.

Product Name: Sodium permanganate
Use level: Industrial
Content: 40 (%)
CAS Number: 10101-50-5
Molecular formula:NaMnO4
Molecular Weight: 141.93

Appearance: purple liquid. A density of 1.36 ~ 1.39 g / cm3, soluble in water, ethanol and ether, soluble in liquid ammonia. Decomposition in alkali. Strong oxidizing. And chemical properties similar to potassium permanganate.

Purposes: as oxidants, disinfectants, fungicides and phosphorous antidotes. Toluene is also used to manufacture saccharin, o-toluene sulfonamide and organic synthesis and purification of phenol wastewater treatment. Can be used for circuit boards, metal surface cleaning, the conductive film cleaning to remove grease, electrolytic manganese dioxide, chemical fiber finishing, electroplating addition to hydrogen sulfide and other odors, as well as water treatment and so on.

Packaging and storage: Industrial Pails barrel, net weight 25kg plastic drum, 250kg steel-plastic composite barrels, 1250kg IBC barrels packaging. Store in a cool dry place.

Quality Standard:  
Items index
Sodium permanganate (NaMnO4) Content / (%) 40
Water-insoluble content / (%) 0.01
Potassium (K) content / (%) 0.22
pH value 6 ?8
Density / (g/cm3) 1.36 1.39
Chloride (Cl) content / (%) 0.02

English name: Calcium Nitrite
Molecular formula: Ca(NO2)2
Molecular weight: 132
CAS NO. 13780-06-8
HS CODE: 28341000
UN NO.: 2627 5.1 type oxidizing agent
Properties: White powder without crystal water. It is tasteless and toxic. Easily in water and presents light yellow solution.

Specifications:
Item Superior grade First grade Second grade
Calcium Nitrite[Ca(NO2)2 as dry basis]% 94 92 90
Calcium Nitrate[Ca(NO3)2 as dry basis]% <4 <5 <6
Calcium hydroxide[Ca(OH)2 as dry basis]% <1.0 <1.0 <1.0
Moisture % <1.0 <1.0 <1.0
Water insoluble matter % <0.6 <1.0 <1.0

Uses:
1. Antifreezing agent.
2. Inhibitor of steel in concrete.
3. Can prepare compound early strength agent.
Packing 25/50/1000KG woven bag lined with plastic or according to customer's requirements.

Trichloroisocyanuric acid (TCCA) 90% Min
intro:
1. Molecular formula: C3N3O3C13
Molecular Weight: 232.44
CAS: 87-90-1
HS NO:29336922
UN NO:2468
2. Structural formula:

3. Uses:
1) water treatment: it can be used to disinfect drink water and water in swimming pool, algae-removing in circulating water.
2) Disinfection: It can be used in disinfecting dinner, food, and dishes, or used in the prophylactic disinfection of home, hotel and public place; hygiene and disease control of hospital; or used in the disinfection of silk worm, animals, birds and fish
3) Other: It can be used in anti-shrinkage finishing of wool, textile bleaching, antimoth of paper and chlorinated agent of rubber.
4. Technical Index:
Appearance: white powder/granular
Available chlorine: 90%Min
PH (1% Aq. Solution): 2.7-3.3
Moisture: 0.5% Max
Granular Size: 8-30mesh or 20-60mesh
Package: 25kg/50kg plastic drum, 50kg fiber drum.
5. Product: According to the requirements of production from customers.