Totstat 1.0

SR2611-2S-S2R+ is an internal (6Gbps) RAID module designed in 2 of 5.25� CD-ROM bay to satisfy the demands of SMB and industrial computing environment. With LCD tents leaving you to easily grasp HDD status. SR2611-2S-S2R+ accommodates 2 of 3.5 � SATA III hard drive and offering both RAID 0 and RAID 1 functions . Uses the RAID 0 function to integrate the capacity of two hard drives and to enhance both read & write performance. On the other hand, uses RAID 1 function for data redundancy by mirroring data among both hard drives to prevent the event of a hard drive failure causes system shutdown. Model No SR2611-2S-S2R+ Drive Bay 2 CDRom DriveBay Drive Fit 2.5"/3.5" SATA III HDD x 2 Host Interface SATA III Connector (7Pin) RAID Level RAID 0 / RAID 1 Hot-Swap RAID 1 Power Supply 15 PIN Power Connector x1, BIG 4Pin Connector x 1 Engineering Configuration Port RS232 Status Display LCD Display Cooling Fan 6cm Fan Buzzer Alarm Yes Environment Detector Fan Failure / Overheat Dimension & Weight 146 ( W ) x 196 ( L ) x 85 ( H ) mm / 1.3 KG Certifications CE / FCC Operating System Windows, Linux Function Control Interface GUI (Windows Only) Packing Content SATA Cable�Internal RS232 Cable�External RS232 Cable�Accessory Kit HDD Capacity Single HDD tested up to 8TB RAID 0 Operating temperature 32° to 104° F (0° to 40° C) Storage temperature 32° to 104° F (0° to 40° C) Relative humidity 5% to 95% noncondensing

GR3660-B3 is a full-featured simple and easy dual bay storage device, along with RAID 0 (Striping), RAID 1 (Mirroring), and JBOD three application modes, with Super Speed USB3.0 transmission interface, not only with fast transmission performance but also easily content data safety with 16TB large storage capacity or information exchange requirement. GR3660-B3 internal use SATA III (6G) chip design and transform into the most easy to use USB3.0 (5G) interface, backwards compatible with USB 2.0 and USB 1.1, not only comprehensive range of usage but also leaving your data transfer without waiting to complete an instant. USB 3.0 performance will slight decrease due to maximum and fragmented data transfer mainly due to the transmission technology. In order to allow better transmission performance, GR3660-B3 add UASP function to transfer data without waiting for previous data transfer is completed before the current transmission data movement, and improved in CPU utilization, data delay and waiting . Model No. GR3660-B3 RAID chip JM561 Host Interface USB3.0 UASP RAID Level RAID 1 / RAID 0 / JBOD Support Hard Drive 2 x 2.5"-3.5" SATA III SSD/HDD (6.0 Gb/s) Single HDD Capacity Single HDD tested up to 8TB Rebuilding YES LED Indicators Power / HDD Access / HDD Failed / Rebuilding / Connection Status Fan 1 x 4cm Fan Power Supply 12V / 4A Adaptor Certification CE / FCC Operating System Windows�Mac & Linux Packing Content Power Adaptor / USB 3.0 Cable / Quick Installation Guide / Accessory Kit Dimension 120(W) x 64(L) x 220(H) mm Net Weight 0.83Kg HDD Capacity Single HDD tested up to 8TB RAID 0 Operating temperature 32° to 104° F (0° to 40° C) Storage temperature -4° to 116° F (-20° to 47° C) Relative humidity 5% to 95% noncondensing

Features 1.Hardware RAID that works seamlessly between Macs and PCs. 2.The GR3660-TB3 is equipped with three configuration modes to suit every need. RAID 0/1/JBOD. 3. Thunderbolt and (USB-C) brings you 40Gbps extreme high data transfer speed. 4. GR3660-TB3 to support 2 x 3.5" / 2.5" SATA HDD/SSD. 5.Thunderbolt and The USB-C that does it all. 6. Support 15W ( 5V/3A ) Power Delivery. 7. Mini Display Port connect DVI/HDMI/VGA display devices. 8. Hardware RAID that works seamlessly between Macs and PCs GR3660's built-in hardware RAID controller chipset and Thunderbolt and type c host interface, not only does it promise high transmission speed, it also eliminates the cross-platform usage issues associated with RAID 0 or RAID 1 setups. Also, with hardware RAID, all data is computed and processed by the built-in CPU. With such advantages, your computer performance can be focused on running the software and work, instead of handling the storage device's transmission issues. Model No: GR3660-TB3 Interfaces: Thunderbolt Port x 2( up to 40 Gbps ), Support 15W (5V/3A) Power Delivering. Mini Display Port: 1 Compatible Drive: 2 x 3.5" /2.5" SATA HDD/SSD ( up to 6 Gbps ) Storage Mode: 2 x Independent ( JBOD ) / RAID 0 / RAID 1 Cooling System: 4 cm Low noise fan Operating System: Windows 7, Windows 10 or above, OS X 10.10 or above Electrical and Operating. Requirements: * Line voltage: 100-240V AC * Frequency: 50Hz to 60Hz, single phase * Operating temperature: 32° to 104° F (0° to 40° C) * Storage temperature: -4° to 113° F (-20° to 45° C) * Relative humidity: 5% to 95% noncondensing Size and Weight Height: 122 mm Width: 63 mm Depth: 244 mm Weight: 1.2 kg Product Code EAN:4713227440240 UPC:884826504429 Carton: 8 pcs per carton Package Accessories: * GR3660-TB3 Product Unit x1 (Removable Tray x2) * Thunderbolt Cable x 1 * AC/DC Adapter x1 * Power Cable x 1 * Accessory kit * Quick Installation Guide x1

GT4670-TB3 is built-in the easy-to-use hardware RAID, and it won't hurt system performance during its REBUILDING WORK completely! It would meet your requirement who always requests for both of system performance and the high memory capacity. GT4670-TB3 with RAID 1 feature would be your best cost-effective storage solution at both of data protection and the system performance. It's really easy for you to set up your new buy GT4670-TB3 in your office or even at home. Thru Marvell's MSU Tool, you could set up its hardware RAID thru a graphic user-friendly interface. You could choose one of the following different RAID modes, RAID 0, 1 and JBOD, to fit your needs for the available large storage space together with its data protection feature. Features 1.Hardware RAID that works seamlessly between Macs and PCs. 2.The GT4670-TB3 is equipped with three configuration modes to suit every need. RAID 0/1/JBOD. 3.Thunderbolt 3 (USB-C) brings you 40Gbps extreme high data transfer speed. 4.GT4670-TB3 to support 4 x 3.5" / 2.5" SATA HDD/SSD. 5.MCU function provides automatic and manual adjustment of FAN. 6.Thunderbolt3 The USB-C that does it all. 7. Support 15W ( 5V/3A ) Power Delivery. 8. Mini Displa yPort connect DVI/??HDMI/VGA display devices. 9. A stand-alone hardware RAID could let your Mac & PC work more efficiently

GR4670-TB3 is built-in the easy-to-use hardware RAID, and it won't hurt system performance during its REBUILDING WORK completely! It would meet your requirement who always requests for both of system performance and the high memory capacity.GR4670-TB3 with RAID 5 feature would be your best cost-effective storage solution at both of data protection and the system performance. It's really easy for you to set up your new buy GR4670-TB3 in your office or even at home. Thru Marvell's MSU Tool, you could set up its hardware RAID thru a graphic user-friendly interface. You could choose one of the following different RAID modes, RAID 0, 1, 5, 10 and JBOD, to fit your needs for the available large storage space together with its data protection feature.

GR8670-TB3 is built-in the easy-to-use hardware RAID, and it won't hurt system performance during its REBUILDING WORK completely! It would meet your requirement who always requests for both of system performance and the high memory capacity.GR8670-TB3 with RAID 5 or even RAID 6 feature would be your best cost-effective storage solution at both of data protection and the system performance. It's really easy for you to set up your new buy GR8670-TB3 in your office or even at home. Thru Marvell's MSU Tool, you could set up its hardware RAID thru a graphic user-friendly interface. You could choose one of the following different RAID modes, RAID 0, 1, 5, 6, 10 ,50, 60 and JBOD, to fit your needs for the available large storage space together with its data protection feature.

GR8680-TB3 is built-in the easy-to-use hardware RAID, and it won't hurt system performance during its REBUILDING WORK completely! It would meet your requirement who always requests for both of system performance and the high memory capacity. GR8680-TB3 with RAID 5 or even RAID 6 feature would be your best cost-effective storage solution at both of data protection and the system performance. It's really easy for you to set up your new buy GR8680-TB3 in your office or even at home. Thru Marvell's MSU Tool, you could set up its hardware RAID thru a graphic user-friendly interface. You could choose one of the following 8 different RAID modes, RAID 0, 1, 5, 6, 10, 50, 60 and JBOD, to fit your needs for the available large storage space together with its data protection feature.

The RAIDON iR2623-S3 is a fault-tolerant hard disk array which is easy to install and hot-swappable allowing drives to be replaced while the power is on. It is suitable for applications such as professional workstations, file servers and as real-time backup storage systems. The iR2623-S3â??s disk array is made up of two 3.5" hard disks, augmented by a 2.5" hard disk or SSD extractable tray with a separate SATA interface to diversify usage. The iR2623-S3 is a dual function storage device, offering data security and removable storage for on the go data transport. Model No iR2623-S3 Interfaces 6Gbps SATA III 1 Ports ( 3.5" RAID Module ) / 6Gbps SATA III 1 Ports ( 2.5" HDD/SSD ) Compatible Drive 2 x 2.5"/3.5" SATA III (6.0 Gbits) HDD/SSD + 1 x 2.5" SATA III (6.0 Gbits) HDD/SSD Storage Mode RAID 1 or RAID 0 ( 3.5" RAID Module ) +Independent volume( 2.5" HDD/SSD ) Operating System Windows, Linux Function Control Interface GUI (Windows Only) Electrical and Operating Requirements * Line voltage: 12V + 5V DC * Maximum continuous power: 60W * Operating temperature: 32° to 104° F (0° to 40° C) * Storage temperature: -4° to 116° F (-20° to 47° C) * Relative humidity: 5% to 95% noncondensing Size and Weight 148 mm (W) x 84 mm (H) x 202 mm (D) , 1.2 Kg Product Code EAN:4711132864984 UPC:884826503668 Carton 8 pcs per carton Package Accessories * iR2623-S3 x 1 * SATA Cable x 2 * Internal RS232 cable x 1 * External RS232 cable x 1 * Accessory kit * Quick Installation Guide

iR4300-S2 is built in the RAID features which protects your data from HDD/SSD damage. Its RAID 5 feature provides you an affordable cost in leveraging your mass data base. iR4300-S2 provides multiple storage options. With RAID 5, a user will have the maximum protection of his/her data with allowance for a single drive failure but yet all data will be kept intact. In the RAID 0 mode, a user will have the benefit of a single massive volume for storage with high I/O speed, with sets of data being striped across the four enclosed drives. Model no. iR4300-S2 Interface 1x SATA II (3Gbps) Support Hard Drive 4x 2.5" SATA SSD/HDD(15mm) RAID Level RAID 0/1/3/5/clone/JBOD Cooling Fan 4 cm Power Supply 15-pin Power Connector LED Indicators Yes System Monitoring Fan Failure / Overheat (alarm) Operating System Windows 7 or above, Linux Certification CE & FCC Product Code EAN:4713227440127 UPC:884826504306 Packing Content iR4300-S2 (with removable drive tray enclosed x 4), Quick Installation Guide, Screws & Keys, SATA Cable, Dimension 146(W)x 42(H) x 153(L) mm Operating temperature 32° to 104° F (0° to 40° C) Storage temperature -4° to 116° F (-20° to 47° C) Relative humidity 5% to 95% noncondensing

RAIDON InTANK iR2770 has a patented design that allows two 2.5â?� SATA drives to be fitted into one 3.5â?� drive space! Itâ??s equipped with optional RAID 0 to enhance the speed of transfer compare to a regular hard drive or switch to RAID 1 for an efficient and securer data backup. Install iR2770 to the floppy or standard 3.5â?� hard drive slot, your system will become the one with RAID function. If you want to upgrade your system with RAID function but your system donâ??t have other free space. iR2770 will be the best solution you can find! iR2770 comes with two RAIDONâ??s removable drive trays. It not only makes user easy to install the hard drives to iR2770, but change the failure hard drive easily. Model No iR2770 ASIC WM6182A Chip Device Interface SATA III 6.0 Gb/s RAID Level RAID 0ï¼?1 Support Hard Drive 2Ã?2.5â?� SATA III 6.0Gb/s HDD/SSD Support Single HDD 2TB Auto Rebuilding YES LED Indicators YES Power Supply SATA 22pin Interface Operating System Windowsï¼?Linux Certifications CE / FCC Function Control Interface GUI (Windows Only) Packing Content Quick Installation Guideã?�Accessory Kit Dimension 102WÃ?147LÃ? 26H mm Net Weight 0.4kg Operating temperature 32° to 104° F (0° to 40° C) Storage temperature -4° to 116° F (-20° to 47° C) Relative humidity 5% to 95% noncondensing