Ventilation Louver With Dust Filter

Pleated Dust Collection Filter Cartridge

We can provide you with high filtration cartridge filter, wide-pleated space, easy-cleaning design. Filter material :cellulose paper, spun boned polyester and with treatment, Top/bottom end cap:open/closed. Packaged in carton.

Dust Collector Filter Overview Dust is mainly the equipment of separating dust from the flue gas. The performance of the dust collector can handle the amount of gas, gas through the resistance loss and the efficiency of dust control. Filter types including mechanical filter, static and wet dust collector, cyclone dust collector, filter cartridge dust collector, dust, etc. Commonly the filter used in removing dust project is divided into four categories. The dust catcher is rely on a variety of power separation and filtration of dust particles from the gas. Ordering Instruction Parameters of 2) medium characteristics (3) equipment materials 4. Inlet medium concentration 5. Other related requirements UnI-Filter Dust into the casing gas filtered by the bag (cartridge) dust, be trapped on external surface of the filter bag has been purified gas through the filter bag into the fan, the fan inhaled directly discharge, with the increase of filtering time outside of the filter bag adhesion of dust is also increasing, filter bag resistance also increases accordingly, which affect the dust removal efficiency, at the moment to start shaking institutions adhere shake down on the surface of the filter bag, dust, dust removed by manual pull out of the drawer. The working principle of single filter Dust gas from the air inlet into the box body by the filter bag filter, dust be trapped on external surface of the filter bag, after purification, the gas is removed by the fan through the outlet, outside the box directly into the interior can also answer the duct to the outdoor. As the host of continuous increasing work outside of the filter bag adhesion of dust, the device resistance rising, therefore must clear grey, to stick to the outside of the filter bag dust shake down, the ash bucket fell to the dust collector drawer by manual removal.

Polyester needle felt is a fine fiber cloth which adopts a non-woven needle punching process and uses fiber staggered and uniform void distribution. The surface of the needle felt produced by polyester staple fiber and polyester crepe is hot rolled, singeed or coated. After treatment, the surface is smooth and not easy to be blocked by dust. The filter material has large void ratio, good gas permeability, wide application, strong chemical stability, not only filtering normal temperature gas, but also filtering acid and alkali. Corrosive gas, and can filter water, filter oil, is normal temperature conditions. Ideal filtration materials in the fields of liquid-solid separation.

Product description Product description PPS needle-punched filter felt is made of imported 100% PPS fiber. PPS fiber has excellent acid and alkali resistance and oxidation resistance, wear resistance and folding resistance. Normal temperature resistance up to 180 ° C, short-term up to 210 ° C, suitable for thermal power, waste incineration, coal-fired boilers and other high sulfur containing flue gas filtration.

P84 needle felt is made of three-dimensional needles made of P84 fiber (ie, polyurethane fiber) produced by Austrian LENZING company. It has good high temperature resistance, temperature resistance up to 280 °C, and P84 fiber section is irregular. Shape, can greatly improve the filtration effect, the fiber itself has certain resistance to hydrolysis and oxidation. The product has good temperature resistance and good filtration effect, and is widely used in complex conditions such as concrete mixing, cement, garbage incineration, coal-fired boilers, etc. Use under conditions.

Generally, when the concentration of industrial dust reaches a certain level (ie, the explosion limit), in the case of static discharge sparks or boundary ignition, it is easy to cause explosion and fire. Such as: flour dust, chemical dust, explosive dust and so on. In the case of electrostatic discharge, there is an explosive nature. In the field of bag dust removal, if these dusts need to be collected by cloth bags, the bags themselves are required to have anti-static function. In addition to the production of ordinary needle felt process, the production of anti-static filter materials also requires the production of needle felts. The conductive fiber yarn is incorporated into the warp of the base fabric.

[ Product Description ] The filter cartridge type dust collector is composed of air inlet pipe, exhaust pipe, box body, ash bucket, cleaning device, flow guiding device, filter cartridge and electric control device. [ product model ] DC series high efficiency pulse filter cartridge dust collector [ Scope of application ] Chemical, steel, power, carbon, abrasive, metallurgy, mechanical processing and other industries [ Product improvement ] Energy saving, long life, easy to use, easy to maintain

ã??Product introductionã??The bag filter uses the high-efficiency function of the dry dust removal of the bag filter to remove dust and recover the gas and dust through filtration. [ product model ] 32-4, 32-5, 32-6, 64-4, 64-5, etc. [ Scope of application ] Most dust management sites [ Product Improvement ] Wide application range, simple structure, convenient operation, high dust removal efficiency and low emission concentration.