Hydraulic Chuck For Lathe

Gamut power operated hollow center chucks are precisely designed and they offer high accuracy and gripping power. These power operated hollow center chucks are also known for their high operational efficiency. Our power operated hollow center chucks are of double wedge type. We can also provide hollow center, two jaws, four jaws as well as high rpm chucks for nc and cnc m/c. Features: •Power chucks are of double wedge type •The chuck body is made from steel forging suitably heat treated •All bearing surfaces are suitably heat treated and precision ground •The base jaws are made from high grade alloy steel, properly case hardened and grounded on all bearing surfaces and Deep guided in chuck body •The base jaw serrations are ground finished •The wedge is double hook type to provide ample bearing area and is made form high grade case hardening alloy steel •The wedge is suitably hardened and grounded on all sliding surfaces. Size range: from 110mm diameter to 400mm diameter. Various

Technical features: 1. Hydraulic / pneumatic cylinder is built-in. No need for extra cylinders. 2. Aluminum alloy chuck body, light-weighted, good heat dispensation. 3. Clamping precision: 0.03-0.05mm 4. Allows non-stop operation when loading parts. 5. Simple structure, high efficiency, low cost, convenient installation. 6. Widely applied to convert manual lathe into powered ones. 7. Widely applied to build special purpose machines. 8. Do not spray cutting fluid to the chuck directly. 9. The Besides O.D. chucking, customer can easily convert a JA7-44/JH7-44 rotary power chuck into a I.D. expanding chuck by installing an expanding kit including a push-nut, a mandrel, and a expading sleeve. 10. The expanding sleeve is designed and made according to customer's requirement.

Technical features: 1. Aluminum alloy, light weight, good heat dissipation, effectively reduce the temperature. 2. Powered by Hydraulic. 3. Clamping precision: 0.03-0.05mm 4. Can easily replace the vice jaws to improve accuracy 5. Simple structure, high efficiency, low cost, convenient installation. 6. Lever or Foot Pedal Actuated. 7. Low Maintenance with Oil Mist Lubrication System

Technical features: 1. Aluminum alloy, light weight, good heat dissipation, effectively reduce the temperature. 2. Powered by Hydraulic. 3. Clamping precision: 0.03-0.05mm 4. Can easily replace the vice jaws to improve accuracy 5. Simple structure, high efficiency, low cost, convenient installation. 6. Lever or Foot Pedal Actuated. 7. Low Maintenance with Oil Mist Lubrication System

Place of Origin: Jiangsu, China (Mainland) Brand Name: IVY pneumatic chucks hard jaws Model Number: HJ08 hard jaws (chuck jaw) Power: Hydraulic Number of Jaws: 3 Item of hard jaw: HJ08 Hrdraulic Lathe Power Chuck Hard Jaw used on CNC Machine Color of chuck hard Jaws: Slivery hard lathe chucks jaws Material of lathe chucks hard Jaws: Advanced Alloy Steel cnc lathes oil chucks jaws Appilcation of Hard Jaws: Machining Workpiece of Special Hardness

Gamut hydraulic copy turning face copying & copy boring. Gamut lathe tracers are made by graded casting and have been robustly constructed to take maximum cut with hardened tool post and very sensitive and precise copy-valve to render trouble free longer service. Gamut tracer can be mounted at rear or front of a lathe machine and can be operated by semi-skilled personnel. Inspection time is drastically reduced and production is increased by many times within accuracy of ±0.025mm when use good machining condition. Features •in-built lubrication system for tracing slide. •6-station servo-actuated turret for multicut operation (optional item at extra cost). •hardened tool post with quick change tool holder. •finish cut system from 0-1.5 mm. Tool get advance automatically in finish cut mode. •forward and retraction of slide and finish cut operation done manually by single operating handle. Electric push botton remote control at extra cost. •master carrier for round master and flat template holder (optional at extra cost) can be set easily having arrangement for longitudinal and axial movements. •power pack having dual delivery pump, oil level indicator, special isolator valve for pressure gauge and filters. 1 set, 250kg, 1500 x 600 x 350

Gamut vertical broaching machines are pull down type and hydraulically operated. These machines are precisely made with hardened, ground and chrome plated 4 guide bar with suitable linear guide bushes fitted on broach puller holding guide plate which are bored on highly precise jig boring machine to maintained centerline with allied machine parts and suitably heat treated to give maximum accuracy continuously. These machines are robustly constructed to minimized vibration during broaching operation. Features : •Built in coolant equipment •Built in hydraulic power pack •Splash guard •Broach pullers to suit broach shank with guide plate. •Broach holding guide plate move up and down on 4 hardened and ground guide bar. •Broach guide bush for tail end to suit broach shank in case of broach retriever system •Hydraulic broach retriever system optional item at extra cost. Various

Supplier: We provide power chucks, rotary cylinders, cullet chucks, synchronous clamp, facing head, clamping series, rotary valve, standard jaw, steel collets, t-nut, lathe chucks, hydraulic chucks for lathe, lathe chuck jaws, pneumatic chucks, lathe chuck parts, rotary air cylinders, power chuck thru-hole ( non-thur-hole, thru-hole with extra long jaw stroke, non-thru-hole with long jaw stroke, stationary), rotary cylinder thru-hole-hydraulic-cylinder ( non-thru-hole rotating hydraulic cylinder, non-thru-hole rotating air cylinder, coolant collector with stroke control).

Technical features: 1. Thru-hole, high speed 2. Super short form, light weight. 3. Built-in safety check valves and pressure relief valve