1604038300 Oil Separator for Atlas Copco Portable Compressor XAS 1604 1604-0383-00.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
Mke: alfa laval Type: mapx 207 sgt-24-60 Wws: 1700~1800 Rc: 142~150 Qty: 20 pcs Aprox 1000kg
Oil Separator Element 1613688000 for Atlas Copco Screw Air Compressor Repair Part 2901021300 2901021301 1613688001.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
Ingersoll Rand Replacement Screw Air Compressor Part (54595442) Air Oil Separator.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
Replacement For Atlas Copco Mobile Machine Air Oil Separator 2911011700 1604132880 2205176172 2911011701.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
Oil Separator 6.2013.0 6.3623.0 6.1965.0 for KAESER Compressor.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
High Efficiency Replace for Hitachi 50HP New Style Air Oil Separator 59031060 52303020 52303021 52303330.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
High quality For Kaeser 6.3795.0 6.3795.1 SM12 screw air compressor oil separator for sale.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
6.3792.0 6.3792.1 Oil Separator for Kaeser Compressor Repair Par SK15 20.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
