Ls-Peg20 3

Properties The polymer body contains strong cationic group radical and activated-adsorbent group radical which can destabilize and flocculate the suspended solids and the negative-charged water soluble matters in the waste water through electro-neutralization and bridging adsorption. It is very effective in flocculating, decolouring, killing algae and removing organics. The product enjoys small dosage but can cause big flocs, rapid precipitation and low turbidity residue, and it can also produce small amount of sludge. It is adaptable to wide range of pH value, between 0.5 and 1.4. This product is smelless, tasteless and harmless. It can be widely used to treat source water and sewage water. Application field 1ú¬Water clarification--improves influent, process and effluent water quality by reducing color, suspended solids and turbidity 2ú¬Dissolved air flotationí¬result in clearer subnatants, increased float solids, and greater throughput 3ú¬Belt filter, centrifuge, screw press dewateringí¬for use as the primary coagulant in dual polymer programs to increase production rates, cake solids and solids capture 4)Filtrationí¬improve filtered water quality and plant throughput. SPECIFICATIONS 1. Appearance: colorless, transparent colloid 2. Molecular weight: í¦ 4í- 105 3. Solid content: í¦ 40% 4. pH, 30% solution: 4-8 5. Ionic nature: cationic Grades: PD LS 20: 20% conc., PD LS 20L :viscosity 100-300cps , PD LS 20H:viscosity 1600cps min., for fixing agent in paper or textile dyeing PD LS 35: 35% conc, viscosity 200-100cps, fixing agent in textile dyeing PD LS 41: 40% conc, viscosity 1000-3000cps, fixing agent in paper PD LS 45: 40% conc, viscosity 2500-5000cps, fixing agent or floculant for water treatment PD LS 49: 40% conc., viscosity 8000-13000cps, for water treatment DADMAC monomer: 60% or 65% conc., for polydadmac production. APPLICATION METHODS When used alone, it should be diluted to the concentration of 0.5%-0.05% (based on solid content). When used to treat different source water or waste water, the dosage is based on the turbidity and the concentration of the water. The most economical dosage is based on the trial. The dosing spot and the mixing velocity should be carefully decided to guarantee that the chemical can be mixed evenly with the construction chemicals and materials in the water and the flocs can not be broken. It is better to dose the product continuously. PACKAGE AND STORAGE 1. It is harmless, no-flammable and non-explosive, it can be stored at room temperature, it can not be placed in the sun. 2. It is packaged in plastic drums with each containing 125kg and 1000kg.

Properties 1. Its dosage lower than aluminum sulfate (based on Al2O3) and water treatment cost is lower than other inorganic flocculants. 2. The product can cause quick formation of flocs, big flocs formation and rapid precipitation. Its treatment capacity is 1.3-3.0 times of other inorganic flocculants. 3. It enjoys wide-range adaptability for different-temperature source water and a good solubility. 4. It is slightly corrosive and easy for operation. 5. The liquid product is suitable for automatic dosing. Furthermore, it will not block pipes over long-time Usage. GRADES PAC LS 01,White or pale yellow powder, spray dryer type, for dinking water, high purity raw water treatment , sizing agent for paper making. PAC LS 02, light yellow powder, spray dryer type, high Sulphate content, for drinking water, high purity raw water treatment. PAC LS 03, Yellow powder, spray dryer type, for drinking water treatment or waster water treatment. PAC LD 01,yellow or brown powder, drum dryer type, for drinking water treatment. PAC LD 02,Yellow powder, drum dryer type, for drinking water treatment or wastewater treatment. PAC LD 03, Yellow powder, drum dryer type, formulated with cationic polymer, for treatment of high turbidity drinking water, raw water and waster water treatment. PAC PAFC, Yellow or brown powder, drum dryer type, high Fe content (1.0-3.0%),for drinking water treatment or waster water treatment. APPLICATION METHODS 1. The liquid product can be dosed directly or dosed after dilution. As for the solid product, dilution is necessary before being dosed. Water amount for dilution shall be determined based on the amount of the chemical to be dosed and the quality of water to be treated. Dilution proportion for solid product is 2%-20%, and for liquid product, 5%-50%(based on weight percentage). 2. The dosage of the liquid product is 3-40g/MT and the dosage of the solid product is 1-15g/MT. The specific dosage is based on the flocculation test and on the trial. 3. Its acidity is lower than other inorganic coagulants. PACKAGE AND STORAGE 1. The solid product is packaged in 25kg polypropylene woven bagswith inner plastics bags. 2. The liquid product can be stored for one year without losing its effect, while the solid product, for two years. The product should be stored in a dry and ventilative room, but the effect will not be affected even if it gets wet.

Name: Acetyl Tetrapeptide-9 Reference: Dermican LS 9837 EINICS number: 231-791-2, 200-289-5, 478-960-9 Purity: >95% Grade: cosmetic Delivery: promptly from stock Formulation: available for your reference, please contact us. MSDS and COA: available for your reference, please contact us Odor: no Stability: stable Solubility: soluble in water Appearance: white powder Recommended dose: 1-3% 2.Usage: anti-aging and skin smoothing 3.Description: Acetyl Tetrapeptide-9 is a synthetic tetrapeptide that provides targeted action on dermal structure via stimulation of lumican and collagen synthesis. It creates a global restructuring of the skin matrix, which is clinically proven to improve skin thickness and firmness. Acetyl Tetrapeptide-9 is a water-soluble powder.

The newest asphalt emulsifier for micro-surfacing construction SM-LS (80%) with 4 types according to the weather condition (Spring,Summer,Autumn,Winter) . Performance as below : 1. initial setting within 15 minutes;final setting within 55minutes 2. open to traffic within 1 hour 3. allowed to mixing for 6 minutes 4. 100% meet the standard of the aggregates cohesion test 5.Dosage (60% -70% asphalt concentration) : 1.2-1.5% (normal asphalt); 2-3% ( modified asphalt) Emulsified asphalt is means the asphalt,emulsifier and water together under the certain process to become liquid asphalt which is in oil in water or water in oil condision . Emulsified asphalt is normally used at high temperature of asphalt road, through mechanical mixing and chemical stability method - emulsification, diffusion into the water and liquefaction at room temperature to become a very good a road building material which with low viscosity and good liquidity function.It can be used under common temperature and also can be used togetehr with cold and wet stone material. Our New asphalt emulsifiers including Rapid setting type, Slow setting type, Medium setting type,super slow setting type,Slow crack rapid solidification type and nonionic emulsifier for remixed formulation. Our products can solve your needs of emulsification and application requirements by different schemes, there are several optional basic type, can be used alone and also can be based on the need to meet with the complex use of emulsifiers with different cracking speed requirements of asphalt emulsion, let the asphalt particles uniformly dispersed in the water solution which mixing with emulsifer then to get the stable emulsion.Products used by domestic and foreign customers for long-term and get very good feedback, can be comparable with any global brand of emulsifier. Below types of emulsifier is used for asphalt emulsion.clients can flexible collocation of various emulsifiers according to their needs, in order to meet the requirements of demulsification speed. For example: SM-LM mix with SM-LLL,can slow the demulsification speed; mix with SM-LF,can fast the demulsification speed. During the process of asphalt emulsion, can Increase emulsification if used together with SM3B/SM-LS.The dosage of Compound emulsifier will be around 0.3-0.5% of the asphalt emulsion, it is better to test by client for the exactly dosage according the different quality of asphalt and the solidification speed. This series of products can be used for routine emulsified asphalt preparation, preparation of cold mix type high content of emulsified asphalt (instead of hot asphalt), also can used in asphalt concrete production process , welcome the industry professionals to discuss cooperation. Special declaration: all below types no need any acid during the emulsion process,and also will have Anti-corrosion effect for the equipment.

LS-M531 CAS NO.: 358-67-8 EINECS NO.: 206-619-1 Chemical Name: 3,3,3-trifluoropropyl)methyldimethoxysilane Appearance: Colorless transparent liquid Purity (by GC, %): 98.0 min Applications: 1. It is used as coupling agent to improve fluororesin and substance adhesion strength. 2. Used to prepare waterproof, oil-proof, and anti-fouling treatment agents, which can be used in the protection treatment of cultural relics, masonry, metal, wood, etc. 3. Used as a finishing agent to reduce the water holding capacity of natural fiber (wool, cotton, leather, etc.) products, and improve the surface's hydrophobic and antifouling properties. 4. Used in hydrophobic and antifouling treatment for glass surface.

CAS 26115 70 8 Acts as adhesion promoter. It has high boiling point, high concentration of trimethoxy silyl groups, isocyanurate chemistry, low basicity and dispersed alkoxy groups. Applications of LS-M43 1,3,5-tris 3 trimethoxysilyl propyl isocyanurate(TTMSPI) 26115 70 8 LS-M43 has characteristic low volatility and oxidation stability, making it very suitable for: The adhesion of the adhesion in the seal -based sealing agent, obviously shows that the substrate that is difficult to sacrifice the flexibility of the sealing agent is sacrificed like an amino silane adhesion. Silane adhesion promoters in higher temperature applications, such as thermal melting adhesives. Package &Storage of LS-M43 1,3,5-Tris[3-(Trimethoxysilyl)Propyl]Isocyanurate(TTMSPI) 26115-70-8 In 25L, 200L drum. Keep in cool, dry and ventilated place. Keep away from moisture. Keep in unopened containers. For more information about silquest a link 597, please feel free to contact us! If you are looking for a reliable silane manufacturer, don't hesitate to contact us!

CAS 429 60 7 As coupling agent; Making waterproof, anti-oil, anti-fouling treatment agent; As waterproof, anti-fouling, anti-weathering and other protection treatmentcultural relics, brick, metal, wood; As agricultural mulching film; As a finishing agent to reduce the water holding capacity, improve the surface hydrophobicity and antifouling; For glass surface detest water antifouling and anti-ultraviolet coating. Special Features of LS-M53 3,3,3-Trifluoropropyltrimethoxysilane 429 60 7 Fluoroalkyl functional silane Applications of LS-M53 3,3,3-trifluoropropyl trimethoxysilane 429-60-7 It is used as coupling agent to improve fluororesin and substance adhesion strength; Used to prepare waterproof, oil-proof, and anti-fouling treatment agents, which can be used in the protection treatment of cultural relics, masonry, metal, wood, etc.; Used as a finishing agent to reduce the water holding capacity of natural fiber (wool, cotton, leather, etc.) products, and improve the surface's hydrophobic and antifouling properties; Used in hydrophobic and antifouling treatment for glass surface. Package & Storage of LS-M53 3 3 3 trifluoropropyl trimethoxysilane 429-60-7 In 1kg fluorinated bottle, 25kg pail, 200kg drum. Keep in cool, dry and ventilated place. Keep away from sunlight and fire sources. Keep in unopened containers, shelf life is 12 months from the date of production. If you are looking for a reliable silane manufacturer, don't hesitate to contact us!