Application:
The typical application field of tiones tm 6012e is polymer-modified dry mixtures based on mineral binders such as cement, lime or gypsum. The highly recommended applications are as follows
Plaster mortar
Skim coat
Grout mortars
Gypsum plaster.
1.Product description
Tiones tm 6012e is a water-soluble redispersible polymer powder based on copolymer of vinyl acetate and ethylene. It's free of any solvents.
3.Properties
Tiones tm 6012e increases cohesion of binding material and improves performances of
Cement based products. It provides pre-mixed mortars with following advantages:
Improves workability
Improves adhesion strength
Improves flexural strength
4. Dosage and handling
Tiones tm 6012e is added to other powdery components to obtain the mixed homogenous formulation. The dosage should be more than 1.5% of the total dry mixture by weight. The final required dosage should be evaluated in suitable tests prior to the actual application.
5.Storage
Tiones tm 6012e should be stored in a cool, dry place. To prevent moisture penetration, the opened bags should be sealed again as soon as possible. On account of thermoplasticity of the redispersible polymer powder, bags must not be stacked higher than one pallet. Tiones tm 6012e storage time should not exceed 6 month.
Application:
Tiones tm 6041a can be used in a variety of applications in building industry. Its typical application field is high flexible polymer-modified dry mixtures based on mineral binders such as cement, lime or gypsum. The highly recommended applications are:
Waterproof mortars
Waterproof wall putty (skim coat)
Concrete repair mortars
Tile grout
Non-shrinking grouting material
Powder paint
1. Product description:
Tiones tm 6041a is a water-soluble redispersible polymer powder based on copolymer of pure acrylate. It's free of any solvents.
2. Specification:
Appearance---------------------------------------- white free-flowing powder
Protective colloid----------------------------------polyvinyl alcohol
Bulk density-----------------------------------------500 ± 100 g/l
Particle size-----------------------------------------max. 5% over 150μ m
Residue moisture----------------------------------≤ 2%
Ph value---------------------------------------------7.0 ± 1.0 (50% dispersion in water)
Film properties------------------------------------opaque, high flexible
Mfft------------------------------------------------approx. 0° c
Tg ---------------------------------------------------(-5° c)
3. Properties:
Tiones tm 6041a is high flexible with very low tg range. It provides pre-mixed mortar with the following advantages:
Outstanding water resistance
Improves flexibility
Improves workability
Excellent weatherability and durability
Prominent heat resistance
Reduces elastic modulus
4. Dosage and handling:
Tiones tm 6041a is added to other powdery components to obtain the mixed homogenous formulation. The dosage should be more than 1.5% of dry material depending on actual application and desired performance. Final required dosage should be evaluated by testing prior to actual application.
20 kg/bag: valved multi-layer paper bag with polyethylene interlayer.
Application
The typical application field of tiones tm 6021e is polymer-modified dry mixtures based on mineral binders such as cement, lime or gypsum. The highly recommended applications are as follows:
Eifs adhesive mortar, plaster mortar & anti-cracking mortar
Cement-based tile adhesive
Tile grouts
Grout mortars
Repair mortar
Gypsum plaster
1. Product description:
Tiones tm 6021e is a water-soluble redispersible polymer powder based on copolymer of vinyl acetate and ethylene. It's free of any solvents.
2. Specifications:
Appearance---------------------------------------- white free-flowing powder
Protective colloid----------------------------------polyvinyl alcohol
Bulk density-----------------------------------------500 ± 100 g/l
Particle size-----------------------------------------max. 10% over 150μ m
Residue moisture----------------------------------≤ 2%
Ph value----------------------------------------------7.0 ± 1.0 (50% dispersion in water)
Film properties-------------------------------------opaque, high flexible
Mfft-------------------------------------------------approx. 0° c
Tg ----------------------------------------------------(+7° c)
3. Properties:
Tiones tm 6021e increases cohesion of binding material and improves performances of cement based products. It provides pre-mixed mortars with following advantages:
Improves adhesion strength substantially
Improves workability
Improves crack resistance
Improves flexural strength
Reduces elastic modulus
4. Dosage and handling:
Tiones tm 6021e is added to other powdery components to obtain the mixed homogenous formulation. The dosage should be more than 1.5% of the total dry mixture by weight. The final required dosage should be evaluated in suitable tests prior to the actual application.
20kg/bag: valved multi-layer paper bag with polyethylene interlayer.
Redispersible polymer powder is soluble in water. Maissen RDP is based on Vinyl acetate ethylene copolymer and use PVA as the protection colloid. Could disperse in water very well and form the emulsion.
Maissen redispersible polymer powder can increase the flexibility, workability, bonding strength and water proofing of mortar. Can be widely used in many kinds of dry mortar.
Redispersible polymer powder is free flowing white or light yellow powder obtained through the spray-drying of aqueous emulsions, which is suitable for the production of various dry mortar. Redispersible Polymer Powder is re-emulsified with water and has the same properties as the original emulsion, that is a film can be formed after water evaporation. This film has high toughness, weather resistance and adhesion to a substrate. In addition, the latex powder with hydrophobic properties can improve the waterproof performance of the waterproof mortar.Water-reducing properties is mainly used for self-leveling.
Redispersible polymer powder is free flowing white or light yellow powder obtained through the spray-drying of aqueous emulsions, which is suitable for the production of various dry mortar. Redispersible Polymer Powder is re-emulsified with water and has the same properties as the original emulsion, that is a film can be formed after water evaporation. This film has high toughness, weather resistance and adhesion to a substrate. In addition, the latex powder with hydrophobic properties can improve the waterproof performance of the waterproof mortar.Water-reducing properties is mainly used for self-leveling.
Improved adhesion: Such as walls, ceilings, or wood surfaces. It helps create a strong bond between the putty and the substrate, reducing the risk of cracking or delamination.
â??Enhanced workability: It helps achieve a smooth and easy-to-apply consistency, making it easier to fill cracks, level surfaces, and achieve desired finishes.
â??Increased flexibility: RDP allowing it to accommodate minor movements or substrate changes without cracking. This is particularly important in areas where some degree of movement is expected, such as walls or ceilings.
Improved crack resistance: It enhances the overall strength and durability of the putty, minimizing the risk of cracks forming over time.
Water resistance: RDP can reduce the risk of moisture-related issues such as swelling, warping, or degradation.
Type:Yd1030
Film-forming temperature
Ash content
Particle diameter 80-120
Character:Good adhesion, dispersity and film formation
Type:Yd1060
Film-forming temperature
Ash conten
Particle diameter 120
Character:Good adhesion, dispersibility and film forming;water resistance and flexibility are strong
Type:Yd1090
Film-forming temperature
Ash conten
Particle diameter
Character:Good adhesion, dispersibility and film forming;water resistance and flexibility are strong
Product Description
Redispersible polymer powder produced by spray-drying special water-based emulsion, mostly based on vinyl acetate-ethylene (VAE), and then obtained a free flowing organic polymer powder. It can re-disperse in water, and form a film after water evaporation by coalescence of individual polymer particles. The film acts as an organic binder, to glue together different substrates, reinforce mortar structure and provide excellent adhesion at cement or gypsum based dry mixed mortar substrate interface.
Technical specification
Appearance: White powder or Fine particles, Free-flowing
Solid content: 98.5%
Bulk Density: 300-500
Viscosity of 50% water solution(Pa.s): 8-12
Minimum film forming temperature: 0
Ash content(1000): 10
Average particle size(um): 80-120
PH value: 6-8
Glass transition temperature(Tg): 0
1.Standard packing is 25kg paper bags inner with PE bag
2.Bluk bags 400kgs/bags,500kgs/ bags
3.Follow customers requests
