Soft-sealing gate valve is the replacement of the traditional gate valve, the use of flexible disc produce trace deformation compensation effect, achieve good sealing effect, the valve has the switch light, reliable sealing, elastic memory and long service life etc, can be widely used in tap water, sewage, construction, food, electricity, medicine, metallurgy, textile, energy systems and other fluid on the pipeline as the adjusting and intercepting device is used.
Features:
â?? Flat-bottomed seat traditional gate valves are usually deposited in the bottom groove of the valve due to external objects such as stone, wood, cement, paper, debris, etc., after flushing the pipe with water. Cause cannot close tightly and form slack phenomenon, soft-sealing gate valve using the same as the pipe at the bottom of the flat design, not easy to cause debris deposition, the fluid flow unimpeded, the whole package glue valve plate is made of high quality rubber, within the whole outsourcing, domestic first-class rubber vulcanization technology make the valve plate after vulcanization can ensure accurate geometry size, and rubber and nodular cast iron gate connecting firm, not easy to fall off and elastic memory preferred.
â?? The corrosion resistant valve body is painted with powder and epoxy resin to prevent corrosion and rust of the valve body, and can be used in sewage system.
â?? Not easily broken into traditional cast iron...
Tags: Gate Valve , Cost of DIN cast iron resilient bolted stem gate v , DIN cast iron resilient bolted stem gate valve , Yuanda valves , Cost of cast iron resilient bolted stem gate valve , DIN cast iron resilient bolted stem gate valves ma , Cast iron valves
Gate Valves are used extensively throughout the Refineries,Hydrocarbon,Energy and process industries. Size: 2" up to 88" (DN 50 up to DN 2200) Pressure Rating: ASME 150# to 2500# Materials: Carbon Steels, Low Temperature Carbon Steel, Martensitic Steels, Austenitic Stainless Steel, Duplex Stainless Steels, Super Duplex Stainless Steels, Nickel Alloys, Nickel Aluminum Bronze, Hastelloy, Inconel, Titanium Alloy & Carbon Steel with Internal Corrosion Resistant Alloy (CRA) Overlay Design Standard: API 600,BS 1414,API 6D Pressure / Temperature Rating: ASME B 16.34 Test (Inspection) Standard: API 598, API 6D, ISO 5208, API6FA, ISO 10497,BS6364 Construction Details: Bolted Bonnet / Pressure Seal Bonnet, OS & Y Type Rising Stem End Connection: Flanged,Butt-Weld Operator / Actuator: Handwheel,Gear,Actuator (Pneumatic, Hydraulic, Electro-Hydraulic and Electric Motorised) Cryogenic Service: Gate Valves can be designed in a special version suitable for cryogenic service. In this case, all the materials and technical features are designed to withstand minimum design temperature required by the Customer, down to Cryogenic -196C. If required by the customer, specific Cryogenic Tests are performed to verify the behaviour of production valves in terms of valve torque, sealing capability, emissions vs the ambient.
1) GATE VALVE; Audco, L&T, ASA Class 150, Cast Carbon Steel to ASTM A216 Gr, WCB Gate Valve, with 13% Cr. S.S. Internals (S.S. 410) IBR Approved. Gear Operated 200 and above Sizes IN MM: 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600
Audco, L&T, ASA Class 300, Cast Carbon Steel to ASTM A216 Gr. WCB Gate Valve, with 13% Cr. S.S. Internals (S.S. 410) IBR Approved. Gear Operated 200mm and above Sizes in MM: 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600
A gate valve is generally used to completely shut off fluid flow or, in the fully open position, provide full flow in a pipeline. Thus it is used either in the fully closed or fully open positions. A gate valve consists of a valve body, seat and disc, a spindle, gland, and a wheel for operating the valve. A gate valve can be defined as a type of valve that used a gate or wedge type disk and the disk moves perpendicular to flow to start or stop the fluid flow in piping. A gate valve is the most common type of valve that used in any process plant. It is a linear motion valve used to start or stop fluid flow. Therefore, there is little pressure drop or flow restriction through the valve. Gate valves are used in many industrial applications including the oil and gas industry, pharmaceuticals, manufacturing, automotive, and marine. Gate valves are not suitable for throttling purposes.
Gate Valves
GATE VALVES: Feature Type : Bolted Bonnet, O. S. & Y Type, Rising Stem, Wedge : Solid Taper Wedge, Split Wedge, Flexible Wedge Size Range : 15mm to 400mm & Above On Request Pressure Rating : 150#, 300#, 400#, 600#, 800#, 900#, 1500# End Connection : Flanged Ends, Socket Weld Ends, Screwed Ends & Butt-Weld Ends MFG. STD. : API 600, API - 6D. BS-1414 Testing : API-6D, API- 598, BS-6755-1 Material of Construction : Cast Carbon Steel (ASTM A-216 GR. WCB, ASTM A 217 GR. WC6, WC9), Forged Steel (ASTM A 105, ASTM A 182 GR F22, F304, F316) Cast Stainless Steel (ASTM A 351 GR. CF8, CF8M, CF3, CF3M), Alloy 20 to ASTM A 351 GR. CN7M
The operation of the gate valve has got it its name. This valve acts like a gate to stop or allow the flow through itself. The valve is either fully closed or fully opened, thus, it faces least pressure drop. These valves are designed for uses related to liquid and gases flow. Here, the valve is opened by lifting the wedge out of the flow path. They are best suitable for hot tapping and pigging and not for throttling purpose.
Gate Valve Features & Specialities Size Range - 1/2" to 36" Pressure Rating - 150#, 300#, 600#, 800#, 900#, 1500# Certifications - IBR, CE, etc. Manual operation, Gearbox Operation and Motorized Actuators With Limit switches With Position Indicators Inspected & Witnessed By third party agencies - API Valves, ATex Valves, CE Valves, Process Valves, Gas Valves, Water Valves, Cryogenic Service, Fire Safe
Gate Valves