Pcd Blank

More SuperHard PCD cutting tool blanks in the size of 5�¼mã??10�¼m and 25�¼m can be used in super-fine processing and fine. They are applicable to the processing of non-metal materials as wood, ceramic,intensified planks and non-farrous material as copper and aluminum. We can supply all kinds of PCD cutting tool blanks that diameter can reach 62mm. PCD Cutting Tool Blanks Application Recommendation * W5 fine grain size(excellent surface finish) Characters: Average grain size: 5�¼m, High diamond content over90%, Laser cutting ,wire EDM cutting Applications:Aluminum, Brass/Copper,Precious metals, Wood composites,Plastic * W10 medium grain size (excellent resistance, good surface finish) Characters:Average grain size: 10�¼m, High diamond content over 90%, Laser cutting ,wire EDM cutting Applications:ï¼?14% Si/Al alloys, Copper alloys, Graphite and graphite composites, Green ceramics and carbides * W25 coarse grain size(Long life, extremely high wear resistance) Characters:Average grain size: 25�¼m, High diamond contentover 90%, Laser cutting ,wire EDM cutting.

PCD cutting tool blanks, PCD blanks Size: 62mm PCD blanks, 58mm PCD blanks, 51mm PCD blanks, 48mm PCD blanks, etc. Type: Triangle, Cylindrical, Square, Flake, etc. Application: PCD blanks are applicable to the processing of non-metal materials as wood, ceramic, intensified planks and non-ferrous material as copper and aluminum. Details More SuperHard PCD cutting tool blanks in the size of 5μmã??10μm and 25μm can be used in super-fine processing and fine. They are applicable to the processing of non-metal materials as wood, ceramic, intensified planks and non-ferrous material as copper and aluminum. We can supply all kinds of PCD cutting tool blanks that diameter can reach 62mm PCD Cutting Tool Blanks Application Recommendation * W5 fine grain size (excellent surface finish) Characters: Average grain size: 5μm, High diamond content over90%, Laser cutting, wire EDM cutting Applications: Aluminum, Brass/Copper, Precious metals, Wood composites, Plastic * W10 medium grain size (excellent resistance, good surface finish) Characters: Average grain size: 10μm, High diamond content over 90%, Laser cutting, wire EDM cutting Applications:ï¼?14% Si/Al alloys, Copper alloys, Graphite and graphite composites, Green ceramics and carbides * W25 coarse grain size (Long life, extremely high wear resistance) Characters: Average grain size: 25μm, High diamond content over 90%, Laser cutting, wire EDM cutting Applications:14% Si/Al alloys, metal matrix composites, Bi-metals(aluminum/ castiron), sintered ceramics and carbides

Name: PCD Cutting Tool Blanks Brief IntroductionMore SuperHard PCD Cutting Tool Blanks In The Size Of 5μmã?�10μm And 25μm Can Be Used In Super-Fine Processing And Fine. Type: Triangle, Cylindrical, Square, Flake, Etc Details More SuperHard PCD Cutting Tool Blanks In The Size Of 5μmã?�10μm And 25μm Can Be Used In Super-Fine Processing And Fine. They Are Applicable To The Processing Of Non-Metal Materials As Wood, Ceramics,Intensified Planks And Non-Farrous Material As Copper And Aluminum. We Can Supply All Kinds Of PCD Cutting Tool Blanks That Diameter Can Reach 58mm . Model Product No Ang Diameter (Mm) Thickness (Mm) MoreD30 360 30 1.6, 2.0, 3.2 MoreD42 360 42 1.6, 2.0, 3.2 MoreD48 360 48 1.6, 2.0, 3.2 MoreD51 360 51 1.6, 2.0, 3.2 MoreD58 360 58 1.6, 2.0, 3.2 Note:The Products Can Be Manufactured Per Customer Request As Non-Standard Shapes Such As Rectangular, Square, Triangle, Rhombus, Sector And So On. Advantages: 1. High hardness, abrasion resistance and impact resistance 2. High speed, good surface finish, long life and high efficiency 3. Cutter layout is force balanced to drill a precise round hole and reduce bit whirl 4. Gauge pads have tungsten carbide inserts for maximum wear resistance 5. The diamond layer with thickness over 1 mm increases abrasion resistance of PDC cutter Please don't hesitate to contact me if you have any needs:miya AT moresuperhard.com Our company also produces a series of diamond and CBN tools, welcome to consult and choose at any time

Supplier: PCD wire drawing die, PCD die blank, PDC cutter, PCD cutting tool blank

The PCD Boring Tools are made by PCD Blanks (E6) Brazing on The Tungsten Carbide Body. Most common is full face PCD Notching Tools. PCD Boring Tools are used for Machining Various Of Tungsten Carbide Rollers. PCD Tips for Carbide Roller Notching.

PCD boring tools are used for machining various of tungsten carbide rollers. PCD tips for carbide roller notching. The PCD boring tools are made by PCD blanks (E6) brazing on the tungsten carbide body. Most common is full face pcd notching tools. Applications of PCD boring tools: PCD boring tools are used for machining various of tungsten carbide rollers. PCD tips for carbide roller notching. Advantages of PCD boring tools: * high abrasive resistance and thermal conductivity * good surface finish * Long service life. The service life is 20-30 times more than carbide boring tools.

"PCD blank for Cutting Tools E-Grind supplies the whole range of PCD blanks for cutting tool purpose. The largest Diameter available can be 55mm. Our PCD provides high wearing resistance ability and high finishing surface. Our plant installs laser cutting machines and surface lapping and finishing machines to provide full service for PCD. With advanced inspecting machines of SEM, C-SCAN, X-Ray Diffractometer etc. Our plant applies strict Quality Control process. PCD application: Non-ferrous metals and alloys: Aluminum/gray iron composite, copper, Aluminum... nonmetallic materials: ceramics, plastic, rubber, chipboard... PCBN PCBN consists of CBN and Binder. It is produced in high pressure and high temperature. It has excellent performance in hardness, wearing resistance, thermal stability. Application: for hard ferrous materials (hardened steel, cast iron, high-temperature alloy, HSS, Powder metallurgy metals, Ni-Cr alloy... E-Grind provides two series of PCBN: 1)Solid CBN 2)CBN with Tungsten Carbide supporting. "

Name: PCD Boring & Notching Tools For Carbide Rollers Introduction:The PCD Boring Tools Are Made By PCD Blanks (E6) Brazing On The Tungsten Carbide Body. Most Common Is Full Face Pcd Notching Tools.PCD Boring Tools Are Used For Machining Various Of Tungsten Carbide Rollers. PCD Tips For Carbide Roller Notching. Details Applications Of PCD Boring Tools: PCD Boring Tools Are Used For Machining Various Of Tungsten Carbide Rollers. PCD Tips For Carbide Roller Notching. Advantages Of PCD Boring Tools: * High Abrasive Resistance And Thermal Conductivity * Good Surface Finish * Long Service Life. The Service Life Is 20-30 Times More Than Carbide Boring Tools. The Specification Of PCD Boring And Notching Tools: DBH1H2L° 2.50.51.65.280 30.61.85.580 3.20.61.86.280 40.72.37.8370 40.82.49.5580 4.50.92.7510.7580 51.03980 40.73.33.47.9880 40.83.33.49.6880 4.50.93.53.910.8080 Application Cases Of PCD Notching Tools For Carbide Rollers: Product NamePCD Boring Tools, PCD Tools For Carbide Roller Notching Size5 * 9ï¼? 4 * 7.8 WorkpieceCarbide Roller Notching * 4*7.8, 5*9 PCD Notching Tools For Carbide Roller Have Sent To Saudi Arabia Customer

Models: RNMN solid CBN, RCMX soilid CBN, PCD notching tools, PCD engraving tools Applications of PCD inserts, solid cbn : high speed steel (HSS) roll, Ni-Cr alloy cast iron roll, chilled cast iron roll, threaded steel roll, cast iron rolls, cast steel rolls, tungsten carbide ring, forged steel cold Rolls Specification: 1ã??PCD and PCBN Tools for Rolls Machining Moresuperhard solid CBN inserts and PCD tools for machining high hardness rolls, cast iron roll, high-speed steel (HSS) roll, Ni-Cr alloy cast iron roll, chilled cast iron roll, threaded steel roll, cast iron rolls, cast steel rolls, tungsten carbide ring, forged steel cold Rolls. Due to its excellent properties, carbide rolls are widely used in the steel industry and their hardness is very high. For the machining of cemented carbide rolls, CBN/PCD Inserts can effectively replace the grinding process to improve production efficiency. The roll is the main workpiece and tool that makes the metal continuously plastically deform on the rolling mill. The roll is mainly composed of three parts: roll body, roll neck and roll head. The roll is the intermediate part of the roll that actually participates in rolling the metal. Has smooth cylindrical or grooved surfaces. Rollers are almost universally used in nearly every manufacturing process in the world. The roller is the main part of the rolling machine, with the pressure which come from the rolling roller to roll the steel. 2ã??The specifications size of PCD tools, solid CBN inserts for machining roll - Solid CBN inserts for Rolls Machining As a PCBN inserts manufacturer and exporter in China, More Superhard's PCBN inserts have excellent performance in processing gray cast iron,nodular cast iron,hardened steel and material, sintered metal,and processing work piece surface is highly polished and very durable. Solid CBN iinserts rough machining high Ni-Cr alloy cast iron rolls, semi finishing chilled cast iron rolls, finish turning forged steel cold rolls, turning tungsten carbide rings and hss rolls, etc - PCD Notching Tools, PCD Boring Cutter for Roller The PCD notching tools, pcd boring cutters are made by PCD blanks (E6) brazing on the tungsten carbide body. Most common is full face pcd notching tools. PCD boring tools are used for machining various of tungsten carbide rollers. PCD tips for carbide roller notching.