Xinkang 99.95%

Supplier: Copper sulphate 24.5%, manganese sulpahte 32%, cobalt sulphate 20.5%, ferrous sulphate 19% & 30%, ammonium molybdate 54%, zinc sulphate mono 33% & hepta 21%, magnesium sulphate 9.6%, boron 20%, boric acid, borax decahydrate 10.5% & pentahydrate 15%, water soluble fertilizers, potassium schoenite, edta chelates(zn, mg, mn, cu, ca, fe), amino acid 80% & 50%, amino cheleted mix, (zn, cu, ca, mn, mg, fe), humic acid granular 80%, potassium humate flakes 98%, potasium fulvic humate 98%, humic acid powder 95%, potassium humate crystal 98%, potassium fulvic humate 98%, seaweed extract powder/flakes, fulvic acid 81%, silicon super spreader, glycine cheleted mixture (cu, mn, cr, zn), choline chloride 50%, 60%, 75%, 98%, bypass fat 84% & 99%, yeast extract powder, beef extract powder, peptone, dextrose monohydrate.

1. Purity:92%, 95%, 99% 2. Particle size:1um 3. Density: 2.34g/cm3 4. Melting point: 2300 C 5. Boiling point: 4002 C 6. Packaging: 1.0kg/plastic bag(vacuum), 10kgs/carton. 1.0kg/plastic bag(vacuum), 10kgs/carton.

Supplier: Metal and metal scrap, ubc, aluminum ingot 95% min, alu 99, 99 %, aluminum wire rod 99, 7%, aluminum 6063 ( scrap), aluminum tense, aluminum wheel, zinc ingot 95% min, zinc ingot 99, 99%. Zinc dross, zinc powder

Ferroalloy cored wire Ferroalloys cored wire: Aluminium 95 alca3070 65 Sulphur (s-99.6) bismuth (bi) Cafeal 403030 pure ca Casiba feb 18-20 Feca 30 feca 60 Fesi 67 fesi 72 Fesi 75 feti 70 Carbon (c) lead (pb) Selenium 98 (se) sica 30 Sica 40 sica 60 Mg 97 fev Titanium 97-99 (ti) Wire diameter 9mm 13mm 16mm

Spraying molybdenum wire used as a thin coating on the surface of automobile components subjected to wear, such as piston rings, gearbox synchromesh parts, selector forks, etc. Molybdenum wire is also sprayed onto machine parts such as bearing for repair purposes. Materials: pure molybdenum, Mo>99. 95% , impurities 5% 18-25kg

Supplier: HMS, aluminum 6063 95%-99%, used rails, scrap of iron, steel, metal, aluminium, copper
Services: Import & export
Buyer: HMS, aluminum 6063 95%-99%, used rails, scrap of iron, steel, metal, aluminium, copper

High alumina ball is a category of alumina ball, due to its high alumina content is referred to as high alumina ball.High ball according to the content of alumina and aluminum can be subdivided into 90, 92, 95, 99, etc.High alumina ball since it has high strength, high hardness, high wear resistance, than the big, small volume, high temperature resistant, corrosion resistance, no pollution and other excellent properties and is widely applied to different types of ceramic, enamel, glass, chemical industry and so on thick hard material finishing and deep processing of the factory. High alumina ball characteristics 1, high mechanical strength. 2, use cycle is long. 3, high temperature resistant performance is good, the highest heat temperature can reach 1900 In addition to the ceramic industry, quartz, chemical and other industries are also trying to, using high alumina ball for production.Quartz factory mainly for the production of micro silicon powder, practice has proved, such as production 325 purpose of silicon powder, replace shi yingqiu grinding with high alumina ball, can significantly increase the yield and the quality of the products, such as whiteness, evenness, and because the loss without shi yingqiu fast, can save the manpower and time cost of adding ball rocks. The current main problems in the use of high alumina ball, high alumina ball because of its high hardness, brittleness is big, dry grinding is easy to cause the ball stone cracking, ball stone surface potholes, resulting in the phenomenon of abrasion is very high, now can only be used before delivery of the ball stone polishing method, pick out the crack or wear high ball stone, try to decrease the loss of customers.

Supplier: Perchloric Acid, Dimethyl Sulphoxide(DMSO) 99.9%min CAS no.:67-68-5, Sodium Methoxide, N-Butyl Lithium Solution(NBL) CAS no.:109-72-8, 5)Vinyl Acetate Monomer(VAM) CAS no.:108-05-4, Sulfanilic Acid 99%min CAS no.:121-57-3, P-Aminoacetanilide 98%min CAS no.:122-80-5, Diethylamine(DEA) 99.7%min CAS no.:109-89-7, 1-Nitropropane 99%min CAS no.:108-03-2, 10)Dibromomethane 99%min CAS no.:74-95-3

trading on variety type of scraps material. From plastic, paper, ferrous and non-ferrous metals scrap. An ongoing of (LDPE) Low density polyethylene could be purchased at our premises and that s includes variety type of LDPE, such LDPE films, roll, lumps and etc. Also, we have LLDPE film/roll and HDPE film/rolls. Regarding the LDPE film scrap, it clear, clean and the quality starts from 99/1, 98/2, 95/5 and etc. These are sourced from our thousands of local vendors, whom made these LDPE scrap avail. Available of post-industrial, which you may call factory waste and post-consumer could be found at our company and our intention is to seek for a potential buyers. With decades of our experience in the industry, we have come to understand our customer and making sure that our first priority is customer s demand and we have kept ourselves . We are thrilled to say that we have served the industry for over 28 years and still kept the ship going.