SHUTTERINGOIL
Applied by spraying guns, rollers or by brushes prior to pouring aerated concrete and are recommended for use as a concrete mould release agent with the protection of moulds from rust.
APPLICATION \'
It is used for prevents sticking of formwork to concrete, allowing easy stripping of formwork after
harder�±ng of concrete. ,
BENEFITS
It helps easy removal of the shuttering at time of deshuttering the member whereas the oil must be of good condition.
It helps in the repetative use of plywood for more project.
It make a thin layer between the plywood and concrete which help in reducing of adhesion in the inner surface.
The Cyclo White Greaseâ??s superior formula sprays on as a liquid, allowing it to penetrate deeper to reach the smallest crevices where it will solidify, lubricate & protect. White Grease\s ability to remain soft and pliable without drying out, allows it to last longer than other lubricants. Great for metal to metal, metal to plastic, & plastic to plastic applications.
Water Soluble Cutting Oils are also mentioned as acerbic oils, soluble oils, and cutting fluids. The word water-soluble can be said to be unsuitable as these are not solvable in water but form a suspension when added to water. Adding water to the oil reliefs rust prevention, it brings away the heat, and it more effectually eradicates particles and also precludes bacteria or fungus build-up. They are embraced of additives to build up the properties of lubrication, above and beyond having biocides for any reeking unpleasant smell to be controlled. Uses of Water Soluble Cutting Oils These oils are essences of a base mineral oil and emulsifiers that let them blend with water and produce a constant blend. A milky white mixture is shaped. They also comprise additives and further cooling, cutting fluids help the cutting procedure by lubricating the surface between the tool�¢??s cutting edge and the chip. Used in the watery form usually 3 to 10%, they also act as oxidization inhibitors and a biocide to regulate profane smell. Cutting Oils are being used for relentless as well as machining processes. At present, these oils are used frequently because of their reputation. They do have oil�¢??s lubricating properties along with waters cooling potentials. Three Application Procedures for Cutting Oils Flood Application Jet Application Mist Application The Main purposes It greases the cutting procedure at low cutting speeds. It is a coolant at extraordinary cutting speeds. It helps in blushing the chips away from the callous zone. It guards the machine's surface against oxidization. It facilitates fragment handling by cooling the hot surface. It develops the life of the apparatus. It delivers ease of chip handling
Honing Oil is superior perseverance, low viscosity, extremely high pressure straight cutting fluid contrived from pure hydrocracked base oils, and prudently designated extreme pressure additives. It is intended to fulfil the severe manufacturerâ??s necessities in the Indian market. Honing Oil comprises sulphur based extreme pressure additives and lubricity additives. Application Honing Oil is proposed for the machining and honing of cast iron and unobstructed machining of steel when re-conditioning engine cylinder bores and heads. Honing Oil is also apposite for thread cutting and profound hole drilling of hard to machine ferrous materials. Reminder: Honing Oil is not to be castoff with copper or copper compounds and is not suggested for honing aluminium. Benefits Outstanding surface finish available Economical operation by providing that superior cooling with trifling drag out Maintains store cleanliness and maximizes process life Eliminates heat from tool and workpiece Enables quick settling of swarf and chips Outstanding anti-weld properties Low stink and fog over Chlorine and zinc free
Product Description Texol Ultra S SAE 10W40 is an advanced, semi-syn- thetic engine oil meeting the requirements of almost all the engines in passenger cars running on multiple fuels like Gasoline, Bio Diesel, Gasoline-ethanol Mix, LPG & LNG. It is mainly suited for turbo charged, multi valve and direct injection engines, based on OEM recommendation. Applications They are semi-synthetic engine oils designed for use in modern gasoline engines, diesel engines (without partic- ulate filters) and gas engines of model year 2012 and later. And it is also suitable for use with bio diesel and Gasoline Ethanol blends. Features and Benefits As a Semi-synthetic engine oil, it provides excellent oxidation stability and low temperature flow properties. Protection of three-way catalyst poisoning by reducing the volatility of the phosphorus in the lubricant. Helps to protect the engine throughout the oil drain interval helps to protect high performance engines from power and performance robbing deposits. Specifications and Approvals API-SN Health and Safety Detailed health and safety information for this product is provided in a Material Safety Data Sheet which is available upon request from our Texol sales office.
EAJ 709 Fully Synthetic Super White Lithium Grease LITHIUM 12-HSA | FULLY SYNTHETIC | LOW POUR POINT | NLGI 2 EAJ 709 S is recommended for lubricating applications ranging from extreme temperature in cold and warm conditions. It serve as a mechanical grease for use on all moving electrical and electronics parts e.g. on line printers, keyboards, platens, computerized embroidery machine, small gears and bearings, switches, plastic gears, electronic devices, VCR, cassettes, small moving mechanisms etc. Usable temperature range @ -30C to 140C [-22F to 28F] 450 gm/can, 1 kg/tub, 18 kg/pail, 180 kg/drum.
Supplier: S oil seven lubricant made by korea oil company
Introduction to Lubricant oil additive PIBSA Mn=1000 PIBSA-1000 is polyisobutylene succinic anhydride that prepared by high-activity polyisobutylene (Mn=1000) and maleic anhydride, can be used for the preparation of fine performance ashless dispersant, can also be used to produce other additives. Technical Index of Lubricant oil additive PIBSA Mn=1000 Item Typical Value Appearance Viscous Transparent Liquid Kinematic Viscosity(100),mm2/s 500-650 Saponification Value,mgKOH/g 90 Free Acid Value,m% 1
TARGET 9000 FULLY SYNTHETIC motor oil is based on Uniform Molecular Technology of full synthetic base stocks that provides a smooth layer of lubricant between the surfaces sliding over each other hence reducing friction and providing ultimate fuel efficiency. The selection of the most advanced additive technology and superior synthetic base stocks provides engine protection to the highest rated RPM engines of sport cars and precisely engineered engines of modern passenger cars operating at extreme temperatures and prevailing through tough driving conditions. APPLICATIONS TARGET SUPER 9000 FULLY SYNTHETIC is applicable to all kinds of precisely engineered modern passenger and sports cars. BENEFITS Hi-tech and most advanced additives & fully synthetic base oils technology ensure ultimate engine protection at peak performance and is specially suitable for high performance modern passenger cars. Advanced synthetic technology maintains oil fluidity at low temperatures keeping engine components lubricated allowing easy start-up and maximum engine protection. Outstanding shear stability and high viscosity index extends engineâ??s service life by maintaining protective oil film at extreme temperatures, heavy load and high speed conditions. * Advanced uniform molecular technology minimizes oil consumption, reducing deposition on engine components and oil supply lines helping maintain fuel economy and a cleaner environment. * Protects engine over a wide temperature range, ensuring less engine downtime with reduced maintenance cost, enhancing fuel economy and engine efficiency at lower oil temperatures. * Active anti-sludge agent increases oil drain interval, keeping the engine clean for longer periods, removing chances of oil starvation due to filter blockade PERFORMANCE STANDARDS SAE 5W-30 API SN/CI-4
TARGET 9000 FULLY SYNTHETIC motor oil is based on Uniform Molecular Technology of full synthetic base stocks that provides a smooth layer of lubricant between the surfaces sliding over each other hence reducing friction and providing ultimate fuel efficiency. The selection of the most advanced additive technology and superior synthetic base stocks provides engine protection to the highest rated RPM engines of sport cars and precisely engineered engines of modern passenger cars operating at extreme temperatures and prevailing through tough driving conditions. APPLICATIONS TARGET SUPER 9000 FULLY SYNTHETIC is applicable to all kinds of precisely engineered modern passenger and sports cars. BENEFITS Hi-tech and most advanced additives & fully synthetic base oils technology ensure ultimate engine protection at peak performance and is specially suitable for high performance modern passenger cars. Advanced synthetic technology maintains oil fluidity at low temperatures keeping engine components lubricated allowing easy start-up and maximum engine protection. Outstanding shear stability and high viscosity index extends engineâ??s service life by maintaining protective oil film at extreme temperatures, heavy load and high speed conditions. Advanced uniform molecular technology minimizes oil consumption, reducing deposition on engine components and oil supply lines helping maintain fuel economy and a cleaner environment. Protects engine over a wide temperature range, ensuring less engine downtime with reduced maintenance cost, enhancing fuel economy and engine efficiency at lower oil temperatures. Active anti-sludge agent increases oil drain interval, keeping the engine clean for longer periods, removing chances of oil starvation due to filter blockade. PERFORMANCE STANDARDS SAE 5W-30 API SN/CI-4 Minimum Order Size : order size must be one container Packaging details : flexi bag, bottles
