Api 5L Gr.x65 Seamless Steel Pipe

We deals in the following products of India, China, Taiwan and Korea Origin:-
1)Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc)
2)Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc)
3)Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc)
4)Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc)
5)Steel Tube and Pipes ( ERW, CRW, CRS, Black, Galvanized, Stainless )
6)Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps.
7)Heavy Duty Props & Light Duty Props.
8)Nuts, Bolts, Nails & Fastners
9)System Scaffolding, Base Plate & Adjustable Base.
10)Steel Tie Rod, Waller Plates and Wing Nuts.
11)Drop Forged and Pressed Sheet Metal Couplers of all types.
12)Steel Billets, Steel Angle & Steel Channels.

High Precision Steel Pipe for Gas spring Cylinder
Type:Seamless and Welded Steel Tube
Roughness 0.1-0.8ra
Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020
Surface:Black/bright
Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101
Size :OD 3mm-140mm Thickness 0.5-20mm
Processing :Cold rolled /cold drawn
1. BK (+C) No heat treatment after last cold forming process.
2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing)
3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed.
4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere.
5. NBK (+N) After the final cold forming process the tubes are annealed above the upper
Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request.
Usage: Gas Spring Cylinder

Product introduction

API 5L X80 Pipe is a standardization for pipeline transportation systems within the rock oil, gas, water, and fossil fuel industries.
API 5L-X80 steel is used in polar regions, wherever high toughness at low temperatures is needed.

Specification:

Api 5l X80 Psl2 Sizes

Nominal Pipe Size 1/2" to 48 " O.D.
Wall Thickness - Schedule 10 through 160, STD, XS, XXS.

Api 5l X80 Erw Pipe Standard

API 5L X80 (Specification for Line Pipe - ANSI/API specification 5L - 44th Edition, October 1, 2007)

Product Specification Level (PSL)

API 5L X80 PSL 2
API 5L X80 PSL 1

API 5L X80 Line Pipe Length

Single Random, Double Random & Required Length, Custom Size - 12 Meter lengths

Api Grade X80 Pipe End

Plain, Bevel, Screwed, Threaded

Testing and Inspection Reports

EN 10204 3.1, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, Destructive Test
Report, Non Destructive Test Reports, Mill TC EN 10204 3.1, NABL Approved Lab, Chemical and Mechanical Reports,
India Boiler Regulations (IBR) Test Certificate

API 5L X80 Pipes Type

Seamless / ERW / Welded / Fabricated / CDW



Technical data

ASTM API 5L X80 Seamless and Welding Steel Tube Mechanical Properties:

Grade

Pipe body of seamless and welded pipes

Weld seam of EW, LW, SAW and COW pipe

Yield strength

Tensile strength

Tensile strength

Minimun

Maximum

Minimun

Maximum

ASTM API 5L X80

555 (80 500)

705 (102 300)

625 (90 600)

825 (119 700)

625 (90 600)



X80 Pipe yield strength:

Grade

Permissible yield point ratio

Yield Strength MPa(min)

Tensile Strength MPa

Elongation % (min)

X80

= 0.90

555

625 â?? 700

20



Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

Circular steel pipe is both openings and have hollow concentric sections of steel larger than the surrounding. The specifications of steel pipes are indicated by appearance dimensions and inner diameter and wall thickness, with a wide range of dimensions from very small diameter capillary to large round steel pipe of several meters in diameter. Round steel pipes can be used for pipelines, thermal equipment, machinery industry, petroleum geological drilling, containers, chemical industry, and special uses. It can be divided into seamless, ERW, LSAW, SSAW steel pipe according to the production process.

Product Name Precision Steel Pipe
Standard DIN2391 EN10305-1 ASTMA179 ASTM A192 ASTM A519
Material SAE1010,SAE1020,#10,#20,#45,304,316
Outer diameter 8MM-50MM
Wall thickness 0.5-50.0MM
Length fixed(3-12m) or customized
Technology High precision Cold drawn/ Cold rolled
Heat treatment BK/BKS/NBK
Advantages
Short delivery time Quality assurance Competitive price

Product Name Precision Steel Pipe
Standard DIN2391 EN10305-1 ASTMA179 ASTM A192 ASTM A519
Material SAE1010,SAE1020,#10,#20,#45,304,316
Outer diameter 8MM-50MM
Wall thickness 0.5-50.0MM
Length fixed(3-12m) or customized
Technology High precision Cold drawn/ Cold rolled
Heat treatment BK/BKS/NBK
Advantages
Short delivery time Quality assurance Competitive price

High Precision Steel Pipe for Gas spring Cylinder
Type:Seamless and Welded Steel Tube
Roughness 0.1-0.8ra
Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020
Surface:Black/bright
Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101
Size :OD 3mm-140mm Thickness 0.5-20mm
Processing :Cold rolled /cold drawn
1. BK (+C) No heat treatment after last cold forming process.
2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing)
3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed.
4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere.
5. NBK (+N) After the final cold forming process the tubes are annealed above the upper
Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request.
Usage: Gas Spring Cylinder

High Precision Steel Pipe for Gas spring Cylinder
Type:Seamless and Welded Steel Tube
Roughness 0.1-0.8ra
Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020
Surface:Black/bright
Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101
Size :OD 3mm-140mm Thickness 0.5-20mm
Processing :Cold rolled /cold drawn
1. BK (+C) No heat treatment after last cold forming process.
2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing)
3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed.
4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere.
5. NBK (+N) After the final cold forming process the tubes are annealed above the upper
Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request.
Usage: Gas Spring Cylinder

High Precision Steel Pipe for Gas spring Cylinder
Type:Seamless and Welded Steel Tube
Roughness 0.1-0.8ra
Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020
Surface:Black/bright
Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101
Size :OD 3mm-140mm Thickness 0.5-20mm
Processing :Cold rolled /cold drawn
1. BK (+C) No heat treatment after last cold forming process.
2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing)
3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed.
4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere.
5. NBK (+N) After the final cold forming process the tubes are annealed above the upper
Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request.
Usage: Gas Spring Cylinder

High Precision Steel Pipe for Gas spring Cylinder
Type:Seamless and Welded Steel Tube
Roughness 0.1-0.8ra
Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020
Surface:Black/bright
Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101
Size :OD 3mm-140mm Thickness 0.5-20mm
Processing :Cold rolled /cold drawn
1. BK (+C) No heat treatment after last cold forming process.
2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing)
3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed.
4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere.
5. NBK (+N) After the final cold forming process the tubes are annealed above the upper
Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request.
Usage: Gas Spring Cylinder