20Kw Wind Generator

Aeolos wind turbine 20kw specification Rated power 20 kw Maximum output power 31 kw Output voltage 320-480 v Blade quantity 3 glass fiber blades Rotor blade diameter 10.0 m (32.8ft) Start-up wind speed 3.0 m/s (6.7 mph) Rated wind speed 10 m/s (22.3 mph) Survival wind speed 45 m/s (100.7 mph) Generator three phase permanent magnetic generator Generator efficiency >0.85 Turbine weight 410 kg (903 lbs) Noise 35 db(a) @ 5m/s Temperature range -20ípc to +50ípc Design lifetime 30 years Warranty standard 5 years extended 10 years

Rotor diameter: 12.35m Blades quantity: 3pcs Direction: always downwind Blades material: Carbon fiber reinforced plastic Rated output Power: 20KW Power supplied to Grid 24KW [in 5seconds] working voltage: DC360V/500V,AC220V/380V Annual average energy production: 50MWH (in rate 5m/s wind speed) working wind speed: 3-35m/s Initial wind speed: 2.0m/s Nominal wind speed: 9.0m/s30.3mph Storm-stand: up to 55m/s Max rotate speed: 120r/min Wind turbine type: Three-phase, PMG Alternator Working temperature: from -40 to +60 C Blade Pitch Control Variable Pitch Over-speed Protection Aerodynamic brake + Electromechanical disc brake Speed Regulate and Shut Down Methods Auto-Yawing, Positive Pitch and Electric Magnet Switch. Gearbox: None, Direct Drive Battery charge time: SENWEI-

Main Parameter: Model: TR10.0-20KW Rated Power: 20KW Max Power: 25KW Generator: Three Phase Permanent Magnet Alternator Rated Output Voltage: 360V Start Wind Speed: 2m/s Rated Wind Speed: 12m/s Maximum Wind Speed: 45m/s Rotor Diameter: 10.0m Rated Rotor Speed: 90r/m Blade Number: 3 Blade Material: Reinforced fiber glass Blade Pitch Control: None, Fixed Pitch Overspend Protection: Auto programmed control Gearbox: None, Direct Drive Temperature Range: -40 to +70 Deg. C Tower Type: Wire Guyed or Free Standing Tower Height: 18m or higher

TL-20KW's parameters rotor diameter£¨m£© 10 speed adjustment way electromagnetism plus drift blade material intensive fiberglass stop way electromagnetism plus manual operation blade quantity 3 generator type permanent magnetism of three-phase current rated speed(m/s) 12 rated power 20KW start up wind speed(m/s) 4 max power 30KW work speed(m/s) 4-35 rated rotor speed(r/min£© 200 security wind speed(m/s) 45 work voltage DC360V-500V start up force moment(n/m) 17 weight of main body£¨kg) 1400.

Rated output: 5kw Max. output: 6.5kva Voltage: 220V/50Hz DC output: 12V/8.3A Noise level: 66-68db Engine model: 186FAE Net weight: 141kg Fuel tank capacity: 16L Dimension: 900*565*700mm Phase number: Single/Three phase Engine type: 1-cylinder,4-stroke,air-cooled

High frequency generator 1.Introduction: High frequency generator named radio frequency generator also. It is the core part of high frequency machinery. Different frequency- 6.78mhz, 13.56mhz, and 27.12mhz can be widely used for woodworking (plywood bending, glue curing, timber drying), grain worm killing, freezing meat melting, and environment protection field.  High frequency generator generates electromagnetic fields between two electrodes through three phase alternating current. In this field, water and glue molecules are polarized - rotated - heated by friction.  high frequency heating is not like conductive heating, which heat material step by step, but help object heated themselves by friction. This is called high frequency dielectric heating-quickly, efficiently and evenly. Besides, there are more advantages in high frequency heating: 1). Easy to control: once cut off power, no heating anymore; once power on, heating works wholly. 2). Low heating loss, energy saving. 3).Environment friendly: high frequency is clean power, dust free. 4).Hf power can kill worm and bacteria in the material like timber and grain. 2.Parameter: Model, hf20-6-ii-ch, hf30-6-ii-ch Power supply, ac 380 v, 50hz, 3 phase four wire Input power, 30kva, 45kva Output power, 20kw, 30kw Frequency, 6.78mhz/ 13.56mhz/27.12mhz Radio tube, fu834 fa, fu924 fa Commutate type, three phase full wave silicon commutate Cooling type, forced air cooled Tuning type, variable capacitance Protection, overload protection, wind pressure protection, door switch protection, filament warm up protection Output type, one/two outputs, one/two outputs Overall size, l1100xw900xh1900mm, l1100xw950xh1950mm Total weight, 700kg, 800kg

Product description Wind turbine / wind power generator 1. Dual, automatic emergency braking system. 2. Unique anti-vibration design. 3. Waterproofing. 4. Unique anti-vibration design. 5. Efficient aero-dynamic design, compared with the vertical shaft, power utilization rate is greatly improved. 6. High strength, corrosion resisting aluminium alloy. 7. Unique permanent magnetic material generator, small size, light weight, power output is very high. 8. Low noise level. Model Nl-3kl-w Rated powe,3kw Rated voltage(dcv) 240v Rated voltage(dca) 17v Wind wheel diameter 4m Blade material Gfrp strengthening Blade numbe,3 Started wind speed 3.0m/s Rated wind speed 10 m/s Safety wind speed 40m/s Upwind method Upwind Rated rotating speed(rpm) 300 Tower height 9m Generato,Asynchronous Braking system Electronic magnet+manual Protection grade Ip55 Noise level ¡Ü55db Insulation class F Operation mode Automatic or manual Suggested battery capacity 12v 200ah 10pcs Efficiency 0.85

Parameter Blade diameter:2.6m Number of blades: 3 Blade material: fiber glass Rated wind speed: 8m/s Start wind speed: 3m/s Working wind speed: 3-25m/s Security wind speed: 40m/s Rated output power: 300w Max output power: 450w Rated speed: 400r/min Type of generator: permanent-magnets-3 phase a.C. Speed regulation: yaw& magnetic resistance output voltage : dc24v Tower type: pull wire tubular tower Normal tower height: 6m Weight of top section: 30kg Necessary battery: 12v 100ah 2 pieces Can supply power for ú¦color tvú¿below 29 inchú¬ú¼lightingú¼electric fan and charger. Packing no. N.W kgs G.W kgs Packing size L (cm) W (cm) H (cm) M3 1 50 62 135 40 31 0.1674 1 3 7 81 55 6 0.0267 3 30 30 200 6 6 0.0216 5 83 99 0.2157

Parameter Blade diameter:2.2m Number of blades: 3 Blades material: fiber glass Rated wind speed: 8m/s Start wind speed: 3m/s Working wind speed: 3-25m/s Security wind speed: 40m/s Rated output power: 200w Max output power: 350w Rated speed: 400r/min Type of generator: permanent-magnets-3 phase a.C. Speed regulation: yaw & magnetic resistance output voltage : dc24v, Tower type: pull wire tubular tower Normal tower height: 6m Weight of top section: 27kg Can supply power for ú¦lightingú¼electric fan and charge. Necessary battery: 12v 100ah 2 pieces Packing no. N.W kgs G.W kgs Packing size L (cm) W (cm) H (cm) M3 1 55 70 113 51 32 0.1844 3 30 30 200 6 6 0.0216 4 85 100 0.2060