We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
Supplier: 1. carbon black
2. rubber crumb
3. precipitated silica
4. silica quartz ore purity: 98% available, silica quartz powder/purity: 99.9% available, silica lumps purity: 99% available
5. calcium chloride powder 74% cacl2 92% cacl2 94%
6. magnesium chloride flake
7. sodium meta bisulphite (food grade 94 96%)
8. red onion as per your required size.
9. sodium acetate anhydrous 99% sodium acetate trihydrate crystal 99%
10.pet preform & fiber, bottle, flakes,
11.bopp tapes
12. capsicum or bell pepper, ready to eat foods, ready green paste like ginger, garlic paste Services: We also do logistic work for cif and we have 3rd party facilities like sgs on client chargeable base.
Sorbic acid is a new, safe, nontoxic and effective food preservative. It is unsaturated fatty acid. It can
participate in normal metabolism and finally be oxidized to water and carbon dioxide, does not accumulate in the human body and has high safety. Its toxicity is only half of salt, 1/ 40 of sodium benzoate.
Food grade sorbic acid has been approved of using in worldwide and successfully used in the food industry in many ways. It has obvious inhibition of molds, yeasts and aerobic bacteria, whose effect on inhibit the growth of bacteria is stronger than the effect on destroy bacteria. It combines with sulfhydryl group in microbial enzyme system to destroy the role of enzymes, so that achieve the purposes of bacteriostasis and antisepsis. It also can prevent from the growth and breeding of botox, staphylococcus and salmonella and other harmful microorganisms. Under acidic conditions (pH value less than 5-6), the effect of bacteriostasis is better, and the food composition has no any impact of preservative effect, so it effectively extends the storage time of food and keep the original flavor of food. However, there is no effect on anaerobic bacteria Bacillus and Lactobacillus acidophilus and other beneficial micro-organisms.
Sorbic acid is a new, safe, nontoxic and effective food preservative. It is unsaturated fatty acid. It can
participate in normal metabolism and finally be oxidized to water and carbon dioxide, does not accumulate in the human body and has high safety. Its toxicity is only half of salt, 1/ 40 of sodium benzoate.
Food grade sorbic acid has been approved of using in worldwide and successfully used in the food industry in many ways. It has obvious inhibition of molds, yeasts and aerobic bacteria, whose effect on inhibit the growth of bacteria is stronger than the effect on destroy bacteria. It combines with sulfhydryl group in microbial enzyme system to destroy the role of enzymes, so that achieve the purposes of bacteriostasis and antisepsis. It also can prevent from the growth and breeding of botox, staphylococcus and salmonella and other harmful microorganisms. Under acidic conditions (pH value less than 5-6), the effect of bacteriostasis is better, and the food composition has no any impact of preservative effect, so it effectively extends the storage time of food and keep the original flavor of food. However, there is no effect on anaerobic bacteria Bacillus and Lactobacillus acidophilus and other beneficial micro-organisms.
THF is an important organic synthetic raw material and a solvent with excellent performance. It is especially suitable for dissolving PVC, polyvinylidene chloride and butyl aniline. It is widely used as a solvent for surface coatings, anticorrosive coatings, printing inks, tape and film coatings, and used in combination. As a reaction solvent, the thickness and brightness of the aluminum layer can be arbitrarily controlled when used in the aluminum electroplating solution. THF itself can be polycondensed (ring-opening and repolymerization initiated by cations) into polytetramethylene ether glycol (PTMEG), also known as tetrahydrofuran homopolyether. PTMEG and toluene diisocyanate (TDI) are made into special rubbers with abrasion resistance, oil resistance, good low temperature performance and high strength; with dimethyl terephthalate and 1,4-butanediol to make block polyether polyester elastic Material.
Pularin:
Foot ball shaped 60 atoms of carbon at edges is layed in pularin.Pularin atoms are arranged in ball.
Each atom is called Bucky balls and tubes are called Bucky tubes or Nano tubes.Each nano tube is 1 to 7 nm diameter i.e 1nm=50000 part of a hair sting.
where?
1)mangampet ,cuddapah dist.Ap,India.app 800 ppm(parts prer million)info given by stanford University.
Cost:
150 times costlier than gold.
10 grams pularin $23000 to $45000
also info given by Bucky-USA website.
Special uses if this becomes common:
1)Pularin coting on aeroplanes withstands from thunders ,rains ,Flashes etc.
2)Bullet proof ackets
3)curing cancer etc.
Product Nature
Chemical name: Potassium Amyl Xanthate (PAX)
Equivalent to : Z-6, AERO 350 xanthate
Molecular Formula: C5H11OCSSK
Physical characteristics: Slight yellow or grey yellow free flowing Powder or pellet and soluble in water. It is a xanthate based on the C5 alkyl isoamyl alcohol in the potassium salt form
Testing method: Lead acetate titration
CAS Number: 2720-73-2
EINECS No.: 213-180-2
Use
A Collector With High Collection And Normal Selectivity,widely Use In Floatation Of CU/PB/NE AND PYRITE, Especially For The Floatation Of The Gold In Gold And Copper Mine.it Could Make Good Result In Copper And Lead Oxidized Ore.ofeen Used In Rough Selecting And Scavenging.
Specifications
Chemical components Specification 1 Specification 2
Purity 85% Min 90% Min
Moisture & volatiles 10% Max 4% Max
Free alkali 0.5% Max 0.2% Max
Packing and Storage
120KG IRON DRUM,134 DRUMS PER 20'FCL,16.08MT; (OR 110-180KG IRON DRUM)
850KG Wooden Box,20 Box Per 20'fcl,17mt; (or 500kg,800kg,850kg Wooden Box With Inner BAG) 25-50KG WOVEN BAG
Product Nature
Molecular formula: Na2SO4
Molecular weight: 142.04
Property: white granular crystal or powder
Use
As filler of detergent, the making of sodium sulphide, water glass, or used in papermaking, glass, dye and used as filler, dyeing auxiliary, laxative, antidote, t also can be used in fiber, leather, metallurgy, enamel and soap.
Specifications
Item GB6009-2003
Type First grade Result of common product Result of neutral product
Na2SO4 99.0 99.20 99 40
Water insoluble matter %0.05 0.02 03
Ca & Mg %(Mg) 0.15 0.02 02
Chloride %(Cl) 0.35 0.23 20
(Fe) 0.002 0.0001 0001
Moisture % 0.20 0.02 02
Whiteness % 82 88 85
Packing and Storage
Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.
