Power Diodes (Stud/Flat Type)
Silicon Diodes are electronic components that conduct current in only one direction. In function, they are similar to one-way valves. Silicon Diodes, using semiconductor materials such as silicon are used as voltage regulators, signal rectifiers, oscillators and signal modulators / demodulators.
Semiconductor diodes consist of a PN junction having two terminals, an anode (+) and a cathode (-). Current flows from the anode to the cathode within the diode. Diodes can be used as voltage regulators, tuning devices in RF tuned circuits, frequency multiplying devices in RF circuits, mixers in RF circuits, switching applications, or can be used to make logic decisions in digital circuits.
Diodes can be sub-divided into six major categories:
General Purpose Diodes (PN junction diodes)
PIN Diodes
Schottky Barrier Diodes
Step-recovery Diodes
Varactor Diodes
Zener Diodes
Laser Diodes
PIN Diodes are three-layer Semiconductor Diodes consisting of an intrinsic layer separating heavily doped P and N layers. The charge stored in the intrinsic layer in conjunction with other Diode parameters determines the resistance of the Diode at RF and microwave frequencies. This resistance typically ranges from kilo ohms to less than 1 ohm for a given diode. PIN Diodes are typically used as switches or attenuator elements.
Step-recovery Diodes employ graded doping where the doping level of the Semi conductive materials is reduced as the P/N junction is approached. This produces an abrupt turn-off time by allowing a very fast release of stored charge when switching from forward to reverse bias. It also allows a rapid re-establishment of forward current when switching from reverse to forward bias. These Diodes are used in very high frequency (VHF) and fast switching applications.
Varactor Diodes are P/N junction Diodes that are designed to act as a voltage-controlled capacitance when operated under reverse bias. One characteristic of P/N junctions is inherent capacitance. When the junction is reverse biased, increasing the applied voltage will cause the depletion region to widen, thus increasing the effective distance between the two â??platesâ?? of the capacitor and decreasing the effective capacitance. By adjusting the doping gradient and junction width, the capacitance range can be controlled and changes can be applied using reverse voltage.
Our Products
Automatic Voltage Regulator (AVR)
Automatic Transfer Switch (ATS)
Power Diodes (Stud/Flat Type)
Power Diodes (Capsule Type)
Phase Control Thyristors (Stud/Flat Type)
Phase Control Thyristors (Capsule Type)
Inverter Grade Thyristors (Capsule Type)
Power Modules
Bridge Rectifier Modules
Three Thyristor Welding Modules
Bridge Rectifiers
Moulded Rectifiers For Generators
Mono Block Bridge Rectifiers (Single Phase)
Mono Block Bridge Rectifiers (Three Phase)
Welding Bridge Rectifiers
Field Failure Relay (FFR)
Generator Diodes
LED light.
Power 900W LED Qtyï 72pcs 5W LED & 6pcs 90W COB Voltageï AC85-265V Work frequency 50/60Hz Lumen >15400Lm Dimmensionï 660X385X118mm N.W 11.4kg Coverage 1.0Ã?1.2 m Warranty 50000 hours
Power 900W LED Qty 72pcs 5W LED & 6pcs 90W COB Voltage AC85-265V Work frequency 50/60Hz Lumen >15400Lm Dimmension 660X385X118mm N.W 11.4kg Coverage 1.0 1.2 m Warranty 50000 hours
Power 1200W LED Qty 96pcs 5W LED & 8pcs 90W COB Voltage AC85-265V Work frequency 50/60Hz Lumen 21050Lm Dimmension 848X385 X118mm N.W 14.8kg Coverage 1.5 X1.0 m Warranty 50000 hours
For the Mosquito killer Led Bulb Light, is a 900 lumen bulb that doubles as an insect killer. The light features a blue UV LED which attracts insects into a Mosquito Killer grid.And the Mosquito Killer grid uses only 1W of electricity, while the light itself uses a meager 9W – and both can be used independently.They are used at home and outdoor. A brush is provided to clean off insects once the bulb switched-off.Compare to other traditional mosquito killer, this bulb has no chemicals, no sprays and hence no fumes to our life. 2nd generation 2-in-1 LED LIGHT Bulb Plus LED Mosquito Killer Bulb Wattage: 10W Blue UV light Lumen: 900-1000lm Color Temperature (CCT): 6500K Input Voltage: AC 90-130V & 220v-240V With CE and ROHS Operation: Step1: Switch it on,both lighting +killing are on. Step2: Switch on again,light off,only killing on. Step3: Switch on again,killing off,only light on. Step4: Switch off, both off.
Supplier: Gas lighter, led screen protector ( not even in domestic ), refill paper cups, table runner, earing brass clamp, auto brass electric parts, cashew nuts, wire mesh, petha sweet, niwar, mohini powder, vermicompost, dry bath incubator, test tube plastic, sordium citrate tube, health care product, ornamental freshwater fish, safed musli, used polymer bag, cotton linter, auto hood cover, areca plate, rice
We just processed in a large batch of chipsets. I posted below current inventory and attached pictures of each type of chipset. Please review and let me know your interest/offer. Chipset 1 (H61) â?? 3,350 units Chipset 2 (H81) â?? 2,206 units Chipset 3 (H55) â?? 436 units Chipset 4 (B250) â?? 1,600 units Chipset 5 (SR406) â?? 345 units Thank you, Divanti Group
Our comprehensive range of Rectifier Diodes offers class-leading performance and reliability. Devices are available with blocking voltages from 200 V up to 6000 V. Optimized to offer low conduction losses, these devices are ideally suited to line frequency applications up to 400Hz including input rectifiers for variable speed drives, traction converters, trackside substations, welding and DC power supplies. Featuring high temperature alloyed die construction, these devices offer low thermal impedance with high overload capacity and are designed to survive even the most arduous applications. The latest additions to the IRI Rectifier Diode family are the new 38 mm and 50 mm dia die IRI Rectifier Diodes and the new 96 mm large area rectifier diodes. These new designs are constructed using low temperature sintering technology and have an improved package design for maximum power to package ratio, as well as better thermal and electromechanical performance. The Capsule type parts are available in current ratings up to 7100 A and voltage ratings up to 6000V. Empowering Industries with Excellence in Capsule Diodes Welcome to Insel Rectifiers, your trusted partner in the world of power solutions. As leading Power Diode manufacturers in India, we take pride in our commitment to delivering precision and excellence in every Capsule Diode we produce. Explore our range of Capsule Diodes, discover the innovation embedded in our products, and understand why we stand out as the preferred Capsule Diode supplier for industries across the nation. Innovation in Every Capsule At Insel Rectifiers, innovation is at the core of our Capsule Diode manufacturing process. We specialize in crafting Capsule-Type Power Diodes that redefine industry standards. Our dedication to technological advancements ensures that each Diode is a testament to precision and reliability. Our Capsule Diodes are ideal for both energy-efficient applications and industrial settings due to their high performance and durability.
Supplier: 1. semiconductor / display material, part, equipment
2. electrical/electronic material, part, equipment
3. medical / biomaterial, equipment
4. machine metal part
5. chemical materials
6. power parts
7. car parts
8. cosmetic
9. consumer goods
Services: Consulting and advisory services:
offering expertise and support for businesses engaging in international trade, such as compliance with trade regulations, market entry strategies, and risk management.
Buyer: Material, parts and equipment
