The new standard applies to GB7588.1
Adopting LDC1000B integrated controller
Super anti-interference serial communication method,without the need for shielded wires for hall calls and car communication lines
The terminal board is highly integrated and Fully prefabricated cables to prevent incorrect plug insertion
Equipped with safety and door circuit node indicator lights,as well as independent short circuit sockets for easy debugging and maintenance
Equipped with UCMP function to prevent accidental movement of the lift car and door lock bypass device
The cabinet body adopts environmentally friendly zinc free galvanized sheet,which is aesthetically pleasing and has a small volume
Floor mounted and wall mounted,embedded installation
Various models for customer’s needs Aux relays for various outputs (FX32J2 and FX32J3) Digital input for event (status) signals Built-in alarm Powerful defrost Temperature display mode selection High/low temperature alarm RS485 communication (Modbus)-options
Energy saving Wide product range (over 20) Multiple temperature sensors 4 power relays Trip message and protection by alarm RS485 communication (Modbus) Display module connection (FxiView)
Aux relay for various outputs Digital input for event(status) signals Built-in buzzer Powerful defrost Communication(MODBUS)
Fuji's servo system can be adapted to several types of motion control, from high-function like synchronization and interpolation to simple-function motion control like Point-to-Point positioning. Meanwhile, the improved auto-tuning function and new option like servo operator make the machine control with high-speed and high-accuracy be achieved more easily.
Product Introduction: The new standard applies to GB7588.1  Adopting LDC1000B integrated controller Super anti-interference serial communication method ,without the need for shielded wires for hall calls and car communication lines The terminal board is highly integrated and fully prefabricated cables to prevent incorrect plug insertion. â? Equipped with safety and door circuit node indicator lights,as well as independent short circuit sockets for easy debugging and maintenance. Equipped with UCMP to prevent accidental movement of the lift car and door lock bypass device  The cabinet body adopts environmentally friendly zinc free galvanized sheet,which is aesthetically pleasing and has a small volume.  Floor mounted and wall mounted Technical parameter: Suitable for business elevators,residential elevators,freight elevators,etc  Maximum speed:3.5 m/S  Input voltage:AC 220V/380V/510V  Power range:5.5KW-30KW Adapted motor:PM/IM â? Adaptive holding brake:currentâ?¤5A,DC48V-220V continuously adjust- able (1V unit) â? Adapted door operator:AC220V door operator system â? Maximum floors:64  Control mode:single elevator/group control  Deceleration method:Distance control directly stops  Size(mm):1300*350*250(height,width,thickness)  Control cabinet weight (kg):35.5
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
AC to DC converter battery charger 150-1000VDC rectifier 120KW power supply Product Introductionï¼? SANDI AC/DC Charger is specially developed for DC chargers. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase, DC output voltage range from 150 to 1000VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger. Unique function High efficiency over the full load range, full load efficiency greater than 95% Wide output voltage range, 150-1000VDC, suitable for a wide range of Lithium or lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main featuresï¼? Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Wide input voltage range: 260~ 530Vac, adaptable to various power grid environments Three-phase AC input without neutral wire: Simplifies system design, eliminates the risk of excessive neutral current, and reduces system costs. Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Battery anti backflow: effectively protects the battery while ensuring reliable and safe operation of the system Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. RS485 interface (Optional)
Supplier: NTC temperature sensor, flexible heater, PTC heater, linear PTC, PTC thermistor, PPTC resettable fuse
Digital temperature controller For fan cooling freezers& cold rooms of low temperature Waterproof panels Double displays (with an outer small display shows temperature synchronously) Manuallyf=automatically defrost by electric heater Evaporator fan control Time/temp.setting to end defrosting Parameter locking Renew factory defaults by button operation Range:·í45f+45f¦(·í40f+120+H) Accuracy: f+1f¦(2+H) Sensor: NTC, 2pcs (room temperature &defrosting control) Power supply: 230VAC or 120VAC 50 / 60Hz Compressor:20A/ 250VAC (1HP) Heater:10A/250VAC Evap.fan:5A / 250VAC Host controller dimension: 77(L)f-35(W)f-60(D)mm Mounting hole dimension of host panel:71(L)f-29(W)mm Accessional display dimension: 83(L)f-23(W)f-18(D)mm Mounting hole dimension of accessional display:66(L)f-19.5(W)mm 50pcs/carton Gross Weight:28.5kg Carton Dimension: 48f-28f-39cm
