The parameters of the single cylinder fructose machine are as follows
Quantitative key position: 16 keys
Rated voltage: 220V/50Hz, 110V/60Hz
Rated power: 280w
Product capacity: 8.5L
Net weight of product: 6.5kg
Product size: 41.5 * 32 * 47cm
Speed: 15-25pcs/minSpecific according to product specifications
Adapt to specifications: 5-5000g(Change the screw parts and customize the screw length and diameter according to requirements.)
Filling head: 1customized
Measurement tolerance±1%
Power380V?60Hz
Power2.2kw
SizeAbout 200010002200mm
WeightAbout 280kg
Quantitative double-component glue filling machine, mainly apply to the fixed ratio mixing of two-component glue and quantitative focused demand. Glue can be either polyurethane or epoxy resin or other materials. Main applications: automotive filters, heat preservation products, steering wheels, seat cushions, filling materials, plates, toys, fitness equipment, or other equipment with quantitative glue demands.
CNC Gantry Machining Center
The main performance characteristics
1 the spindle of the CNC Gantry Machining Center adopts the high precision spindle assembly, the belt type milling head, the main shaft is the servo motor drive. X, y, Z axis servo control, the direct connect architecture, with automatic lubricating system, machine tools to achieve a rapid motion; X, y, Z three directions to feed with high accuracy high strength ball screw, high feed speed; driving motor through flexible coupling with screw direct coupled, servo servo motor directly deliver power to the high precision ball screw, no backlash to ensure the positioning precision of the machine tool.
2 Taiwan famous brand spindle with high speed and high precision, high rigidity spindle unit, axial and radial load capacity, speed up to 6000rpm; the center of spindle blowing structure, with rapidly in the tool release after cleaning of the spindle cone center of high pressure gas, to ensure the accuracy of tool clamping;
3. X, y, Z axis servo control, direct coupled structure is adopted in the Taiwan high precision and high intensity of ball screw, screw installation of pre stretching, connecting rigidity, high feed speed; the servo motor directly transferring power to a high precision ball screw, no backlash, ensure the machine tool positioning accuracy. The Z shaft is provided with a hydraulic balancing device, which ensures.
4 Y, X, Z three direction guide rails, the lead screw all uses the airtight protection, guarantees the lead screw and the guide rail clean, guarantees the machine tool transmission and the movement precision;
5 the outer protection of the machine tool is designed with the ring structure, which is safe and reliable;
6. Machining center configuration: the Taiwan high quality of 16 or 20 knife bevel knife library, the shortest path tool change, tool change accurately, short time, high efficiency, the test run, in line with the reliability requirements;
7 using the centralized automatic lubrication device, timing, quantitative automatic intermittent lubrication, stable and reliable work;
CNC Machining Center main performance characteristics
1 the spindle of the machine tool adopts the high precision spindle assembly, the belt type milling head, the main shaft is the servo motor drive. X, y, Z axis servo control, the direct connect architecture, with automatic lubricating system, machine tools to achieve a rapid motion; X, y, Z three directions to feed with high accuracy high strength ball screw, high feed speed; driving motor through flexible coupling with screw direct coupled, servo servo motor directly deliver power to the high precision ball screw, no backlash to ensure the positioning precision of the machine tool.
2 Taiwan famous brand spindle with high speed and high precision, high rigidity spindle unit, axial and radial load capacity, speed up to 6000rpm; the center of spindle blowing structure, with rapidly in the tool release after cleaning of the spindle cone center of high pressure gas, to ensure the accuracy of tool clamping;
3. X, y, Z axis servo control, direct coupled structure is adopted in the Taiwan high precision and high intensity of ball screw, screw installation of pre stretching, connecting rigidity, high feed speed; the servo motor directly transferring power to a high precision ball screw, no backlash, ensure the machine tool positioning accuracy. The Z shaft is provided with a hydraulic balancing device, which ensures.
4 Y, X, Z three direction guide rails, the lead screw all uses the airtight protection, guarantees the lead screw and the guide rail clean, guarantees the machine tool transmission and the movement precision;
5 the outer protection of the machine tool is designed with the ring structure, which is safe and reliable;
6. Machining center configuration: the Taiwan high quality of 16 or 20 knife bevel knife library, the shortest path tool change, tool change accurately, short time, high efficiency, the test run, in line with the reliability requirements;
7 using the centralized automatic lubrication device, timing, quantitative automatic intermittent lubrication, stable and reliable work;
8 the machine electrical system wiring neatly, the structure is reasonable, the electric box seal is good, is equipped with the heat exchange system, guaranteed the good use environment;
9. CNC system (FANUC, Mitsubishi, Siemens, wide number) can be selected. The system has perfect and reliable interlocking, safety protection and fault diagnosis and alarm functions, equipped with RS232 communication interface;
10 the machine is easy to operate, flexible and quick.
CNC Gantry Milling Machine China,
The main performance characteristics
1 the spindle of the CNC Gantry Machining Center adopts the high precision spindle assembly, the belt type milling head, the main shaft is the servo motor drive. X, y, Z axis servo control, the direct connect architecture, with automatic lubricating system, machine tools to achieve a rapid motion; X, y, Z three directions to feed with high accuracy high strength ball screw, high feed speed; driving motor through flexible coupling with screw direct coupled, servo servo motor directly deliver power to the high precision ball screw, no backlash to ensure the positioning precision of the machine tool.
2 Taiwan famous brand spindle with high speed and high precision, high rigidity spindle unit, axial and radial load capacity, speed up to 6000rpm; the center of spindle blowing structure, with rapidly in the tool release after cleaning of the spindle cone center of high pressure gas, to ensure the accuracy of tool clamping;
3. X, y, Z axis servo control, direct coupled structure is adopted in the Taiwan high precision and high intensity of ball screw, screw installation of pre stretching, connecting rigidity, high feed speed; the servo motor directly transferring power to a high precision ball screw, no backlash, ensure the machine tool positioning accuracy. The Z shaft is provided with a hydraulic balancing device, which ensures.
4 Y, X, Z three direction guide rails, the lead screw all uses the airtight protection, guarantees the lead screw and the guide rail clean, guarantees the machine tool transmission and the movement precision;
5 the outer protection of the machine tool is designed with the ring structure, which is safe and reliable;
6. Machining center configuration: the Taiwan high quality of 16 or 20 knife bevel knife library, the shortest path tool change, tool change accurately, short time, high efficiency, the test run, in line with the reliability requirements;
7 using the centralized automatic lubrication device, timing, quantitative automatic intermittent lubrication, stable and reliable work;
8 the machine electrical system wiring neatly, the structure is reasonable, the electric box seal is good, is equipped with the heat exchange system, guaranteed the good use environment;
9. CNC system (FANUC, Mitsubishi, Siemens, wide number) can be selected. The system has perfect and reliable interlocking, safety protection and fault diagnosis and alarm functions, equipped with RS232 communication interface;
Moving column CNC pipe cutting machine is an equipment that can automatically cut and process the coherent line end, coherent line hole and pipe elbow on the metal round pipe or square pipe.Good welding grooves can be cut according to the requirements of the welding Welding Procedure Specification
https://boda-steelcutting.cn/9420.html
Detailed Introduction
Cutting method and principle
This moving-column CNC intersecting line cutting machine can automatically complete the cutting and processing of the intersecting line ends, intersecting line holes, and pipe elbows of metal round or square pipes. A perfect welding groove can be cut according to the requirements of the welding process.
Product advantages
Moving column type cutting head mobile structure, stroke 6m. Chuck type steel pipe clamping method, manual or electric clamping. Bracket type steel pipe support structure, which can be driven manually or hydraulically. Special intersecting line cutting system, quantitative built-in intersecting line expansion cutting macro library. Plane connecting rod type slope control structure �±60 swing angle range. Linear guide rail, ball screw, rack and pinion combined transmission mechanism.
Application range and purpose
The application of pipe intersecting line cutting is mainly divided into two categories: one type is conveying pipelines, with simple welding structure of main and branch pipes; the other type is pipe frame steel structure, where multiple pipes intersect and the welding structure is complicated. It is widely used in pipe frame steel structure, petroleum, construction, bridge engineering, municipal construction, electric power, shipbuilding, offshore engineering and other industries
CK5225E Double Column CNC Vertical Lathe
1. Such series of products adopt modularization design and the function can be selected arbitrarily. The product design is mature and reliable, thus, large amount of users have selected them.
2. With 100% full manual operation function, the common operator of vertical lathe can operate it as well without worrying about failure to manipulate machine tool due to the incapacity of programming. In addition, it is convenient and practical.
3. The working platform adopts four-step machinery + big power DC motor stepless speed control (AC frequency conversion can be selected) to realize rotary with large torque and own the turning function with constant line rate.
4. Excellent casting (HT300) is handled by heat aging.
5. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type. The vertical tool holder utilizes square type ram (QT600-3), which can realize heavy cutting. The sliding surface uses sticking plastic treatment with durable performance.
6. The beam guide, ram guide and vertical column guide adopt automatic lubrication pump for automatic timing and quantitative lubricating.
7. The ball screw adopt such type of Nanjing process or Taiwan HIWIN P3 level high precision while the lead screw uses imported bearing (Germany INA) for supporting.
8. The guide can be divided into such two types as static pressure and purely static pressure. The bearing of dynamic and static pressure is 10 ton; the purely static pressure adopts constant current for oil supply with 16-20 tons of bearing.
9. Independent hydraulic station is possessed, which facilitates adjustment, repair and maintenance.
10. The precision performs JB/T9934.1-1999 precision test of CNC vertical lathe as well as JB/T9934.2-1999 technical condition of CNC vertical lathe
11. High-standard processing and assembly process ensure the perfect product quality.
12. High-precision variable speed gear (Grade 6) and high-precision spiral bevel gear (Grade 6 gear grading) are featured with low noise and high rotary precision.
13. It is developed independently by the company.
14. Optional functions: constant current and static pressure, grating and closed loop, heightening the machine tool and ram and function of cutting thread etc.
CK5231E Double Column CNC Vertical Lathe china
Such series of products adopt modularization design and the function can be selected arbitrarily. The product design is mature and reliable, thus, large amount of users have selected them.
2. With 100% full manual operation function, the common operator of vertical lathe can operate it as well without worrying about failure to manipulate machine tool due to the incapacity of programming. In addition, it is convenient and practical.
3. The working platform adopts four-step machinery + big power DC motor stepless speed control (AC frequency conversion can be selected) to realize rotary with large torque and own the turning function with constant line rate.
4. Excellent casting (HT300) is handled by heat aging.
5. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type. The vertical tool holder utilizes square type ram (QT600-3), which can realize heavy cutting. The sliding surface uses sticking plastic treatment with durable performance.
6. The beam guide, ram guide and vertical column guide adopt automatic lubrication pump for automatic timing and quantitative lubricating.
7. The ball screw adopt such type of Nanjing process or Taiwan HIWIN P3 level high precision while the lead screw uses imported bearing (Germany INA) fo r supporting.
8. The guide can be divided into such two types as static pressure and purely static pressure. The bearing of dynamic and static pressure is 10 ton; the purely static pressure adopts constant current for oil supply with 16-20 tons of bearing.
9. Independent hydraulic station is possessed, which facilitates adjustment, repair and maintenance.
10. The precision performs JB/T9934.1-1999 precision test of CNC vertical lathe as well as JB/T9934.2-1999 technical condition of CNC vertical lathe
11. High-standard processing and assembly process ensure the perfect product quality.
12. High-precision variable speed gear (Grade 6) and high-precision spiral bevel gear (Grade 6 gear grading) are featured with low noise and high rotary precision.
13. It is developed independently by the company.
14. Optional functions: constant current and static pressure, grating and closed loop, heightening the machine tool and ram and function of cutting thread etc.
