ER-TS-4256DI1 Features:
1. Biaxial tilt monitoring;
2. Wide voltage input DC 9~36V;
3. Full range accuracy 0.1 , resolution 0.01
Introduction
ER-TS-4256DI1 is a new generation of digital small volume MEMS tilt sensor, with built-in dual channel earth gravity tilt unit, which can be converted into inclination change by measuring static gravity acceleration. Thus the tilt and pitch angle of the sensor output relative to the horizontal plane can be measured. The output mode has RS232, RS485 or TTL, MODBUS level interface to choose from. Due to the built-in MCU control system, the output linearity of the sensor has been corrected twice to make up for the loss of accuracy caused by the lack of analog correction.
The product adopts non-contact measurement original quantity, which can output the current attitude inclination in real time. The operation is simple, and there is no need to retrieve the two sides of the change. It can resist external electromagnetic interference and adapt to harsh industrial environment for long-term work, so it is an ideal choice for industrial automation control and platform attitude measurement. It has strong resistance to external electromagnetic interference and can be adapted to work in harsh industrial environment for a long time.
Features
Biaxial tilt monitoring
Full range accuracy 0.1, resolution 0.01
Industrial grade design
Wide voltage input DC 9~36V (5V can be customized)
Wide temperature working -40~+85
Range 0~±90(optional)
High vibration resistance>3500g
The baud rate is adjustable from 2400~115200
IP67 protection level
Output RS232/RS485/TTL/MODBUS (optional)
Small volume (90*40*27mm) (customizable)
Applications
High voltage power line tower pole monitoring
Satellite solar antenna positioning
Tractor, deep tillage machinery
Mining machinery, oil logging equipment
Medical equipment
Hydraulic lifting platform
Tilt based monitoring
Various construction machinery angle control
Inspection of bridges and dams
Introduction ER-TS-4156DI digital single axis tilt meter is a new generation of digital small-volume MEMS tilt meter, built-in dual-channel earth gravity tilt unit, which measures static gravity acceleration and converts it into tilt change. Thus the sensor output can be measured with respect to the horizontal plane tilt and pitch angle. The output mode has RS232, RS485 or TTL, MODBUS level interface to choose from. Due to the built-in MCU control system, the output linearity of the sensor has been corrected twice to make up for the loss of accuracy caused by the lack of analog correction. The product adopts non-contact measurement of the original quantity, which can output the current attitude and inclination in real time. The operation is simple, and there is no need to retrieve the two sides of the change. It can resist external electromagnetic interference and adapt to harsh industrial environment for long-term work, so it is an ideal choice for industrial automation control and platform attitude measurement. Features Single axis tilt monitoring Full range accuracy 0.1, resolution 0.01 Industrial design Wide voltage input DC 9~36V (5V can be customized) Wide temperature working -40~+85 Measuring range: 0~±180(optional) High vibration resistance >3500g Baud rate 2400~115200 adjustable IP67 protection Output: RS232/RS485/TTL/MODBUS (optional) Small volume (90*40*27mm) (customizable) Applications High voltage power line tower pole monitoring Satellite solar antenna positioning Aerial work vehicle Mining machinery, oil logging equipment Medical equipment Tripod head levelling Hydraulic lifting platform Tilt based monitoring Various construction machinery angle control Inspection of bridges and dams
ER-TS-2186DI Features: 1. Single axis tilt monitoring; 2. Full range accuracy 0.005�°, resolution 0.0007 3. Output frequency 5~100HZ (optional). Introduction ER-TS-2186DI is a high-precision single-axis tilt sensor with a resolution of 0.0007�°, an accuracy of 0.005�°, and a temperature drift of 0.0007�°/â??. The output interface has RS232, RS485, RS422, TTL, CAN, MODBUS bus to choose from. The product is equipped with high-precision digital sensor, which can correct the temperature drift of the sensor according to the monitoring temperature change of the built-in temperature sensor to ensure the repeatability of the product in low temperature and high temperature environments. Its corresponding frequency is 100Hz, the performance is reliable and stable, and the scalability is good, that is, it is suitable for various industrial control environments. Features Single axis tilt monitoring Full range accuracy 0.005�°, resolution 0.0007�° Output frequency 5~100HZ (optional) Wide voltage input DC 11~36V(5V can be customized) Wide temperature working -40~+85â?? Measuring range 0~�±5/�±10/�±15/�±30�° (optional) High vibration resistance >20000g Baud rate 2400~115200 (adjustable) IP67 protection Can output RS232/RS485/TTL/MODBUS (optional) Small volume (107*55*27mm) (customizable) Applications High-voltage wire tower pole monitoring Satellite solar antenna positioning Precision machine tool horizontal control Precision laser platform equipment Medical equipment Tripod head leveling Railway locomotive Based on tilt monitoring Angle control of various construction machinery Inspection of bridges and dams
Supplier: Wireless charger, batteries power bank, dust sensor, optical disc drive, tof, lidar, ar glass
Supplier: Agriculture product and garment product, marine oil, ship engine oil low sulphur fuel, propulsion oil, high sulphur fuel, gl4 oil, water resistant oil, cycle rickshaw & thela, stabilizer, electronic voltage corrector
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Supplier: Wired magnetic door sensors.
Flat Cable M&P is able to support a full line of flat cable and flat ribbon cable for electronic applications. Providing both power and data transmissions, flat cables are mainly used for internal connections within the equipment. They are available in a wide range of configurations to accommodate different connection and data transmission requirements and the range of sizes of the equipment using the cables. Flat cables provide consistent performance due to their layout and the spacing between the cables and are lighter, thinner and more flexible than other cables. Features of Our Flat Cables & Wire * Flat, ribbon and twisted configurations, with different levels of flexibility. * Shielded or jacketed cable to reduce signal interference. * Range of pitches and pin configurations to accommodate the application requirements. * Easy to fasten with clamps, adhesive, and tape. We provide custom services, including marking, kitting and custom cable design to provide you with a custom solution for your cabling application. Contact us to find out more about Flat Cables and Wires.