API standard drill pipe Float valve is one of necessary tool for drilling, it consists of float valve sub and float valve, the main function are to prevent drill cuttings come into mud when connecting each joint and the bit bore block caused by back flow of silt.
Engineered with precision and designed to regulate fluid flow, our high-quality float valves ensure optimal performance and dependable sealing. Crafted from durable materials, these valves offer superior resistance to corrosion, abrasion, and harsh operating conditions. With their innovative design and advanced functionality, float valves play a vital role in preventing backflow, maintaining pressure control, and enhancing safety in oilfield operations. Trust in our float valve solutions to optimize fluid control, increase efficiency, and achieve smooth-running operations in your oilfield projects.
1.1 Plunger-type float valves:
The Model F is a plunger-type float valve that provides a positive instantaneous shut off, providing constant fluid control while drilling. The Model F is a reliable and economical selection under standard drilling operations.
1.2 Flapper-type float valves:
The Model G is a flapper-type float valve that, when opened, offers an unobstructed bore through the float valve. The uniquely designed flapper closes rapidly to prevent shavings from entering the drill string when circulation stops and also assists primary BOP equipment in maintaining internal pressure control. The valve will fully open when the first joint is raised from the hole, preventing pulling wet joints.
Description: Float valve is one of necessary tool for oil drilling, it consists of float valve sub and float valve, The main function are to prevent drill cuttings come into mud when connecting each joint and the bit bore block caused by back flow of silt. When the well blowout or kick, the valve cover of float valve turn off the bore automatically, it will prevent well blowout accident. The working pressure of float valve is supposed to be 5000psi or 10000psi. Float valve sub has two types:
Peculiarity: 1, it uses double lever mechanical design principle and the whole stainless steel structure. The use of life will last more than ten years. 2, the packing material of the ball is waterproof bubble 3, have the automatic adjustment function. Size and weight depand on the demands of yours.
It consists of a valve connected to a hollow sealed float by means of a lever, mounted near the top of the tank. The float is often ball-shaped. The valve is connected to the incoming water supply, and is opened and closed by the lever which has the float mounted on the end. When the water level rises, the float rises with it; once it rises to a pre-set level, the mechanism forces the lever to close the valve and shut off the water flow.
Drill pipe float valves, or non-return valves, are downhole safety valves that create barriers to prevent unwanted flow of fluids up the drill string. The float valve locks down the flow of fluids while the crew at the rigfloor is making or breaking connections. Specifying the optimum drill pipe float valve for oil and gas projects is critical - the different valve types extend further than a simple split between the F-type plunger valves and the G-type flapper valves. For further reading and to view the complete article by Keystone Energy please visit : 7 Types of Drill Pipe Float Valves.
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size �¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
Pvc floating valve
Floating ball valve 1. Design: api 6d, ansi b16.34 2. Face to face: api6d, b16.10 3. Flange end: ansi, b16.5 4. Size range: 1/2 - 10" 5. Pressure ratings: ansi 150, 300, 600, 900, 1500; 6. Body materials: wcb, lcb, cf8, cf8m, cf3, cf3m etc. 7. Trim: 13cr, 304ss, 316ss, duplex stainless steel; 8. Full bore and reduced bore 9. Actuations: lever, worm gear Exporting standards case
Ball valves, TFC china. Sea worthy plywood cases.
Product : Sant Forged Brass Float Valve Body Material cum standard : Forged Brass Product Description : Horizontal Plunger Type End Details : Screwed female BSP Parallel Threads Testing & Certification Body Test Pressure : 1.05 MPa (APS Marines & Logistics)
