Foam Rebound Tester

This tester is designed for measuring the foam materials hardness property. It isd complied with ASTM D3574 and ISO 2439 standard. Total of eight test methods for selection. All test procedures will be pre-install into the PLC system. Customer can easily choose one of method to perform the measurement. This machine supports standard and self-define test program, test parameters such as sample size, speed, rest time, cycles, can be tailor-made on touch screen.

This porosity tester is used to measure the porosity of flexible cellular polyurethane. The test principle is to place the specimen in a cavity, and the equipment automatically applies continuous air pressure, then test how easy it is for the air to pass through the cellular structure of the foam.

Scope Test standard: ASTM D892 This instrument is used to determine the tendency and stability of oil to produce foam, such as fuel oil, lubricating oil, gear oil, hydraulic oil. Features 1, the instrument uses a high-precision digital display temperature control mode, with high temperature control, display intuitive 2, automatic temperature control, automatic timing, air source and gas flow centralized control system, easy to operate 3, high technology content, and with a digital electronic timing function 4, the instrument uses a split, integrated combination, easy to move 5, configure the dedicated refrigeration system to meet the needs of experimental low temperature 6, the instrument configuration dedicated green pump system, no external air supply Technical Parameters 1, power supply voltage: AC220V ± 10% 50Hz 2, FDT foam properties thermostatic bath temperature: 24 ?? 93.5 ?? 3, the heater power: 2500W (93.5 ?? bathtub) 800W (24 ?? bath) 4, temperature measurement devices: platinum resistance (PT100) 5, the gas diffusion head diameter: 25.4mm ± 0.02 6, diffuser air permeability: at 2.4KPa (250mmH O) pressure is 3000 ~ 6000mL / min 7, experimental cylinder specifications: 1000mL (special cylinder)

Scope Lubricant foam performance tester is based on national standards GB / T12579 design and manufacture of the provisions for the determination of anti-oil, lubricating oil, gear oil, hydraulic oil, the oil tends to foam formation and the degree of stability. Features 1, the instrument uses a high-precision digital display temperature control mode, with high precision temperature control, intuitive display 2, FDT foam properties with automatic temperature control, automatic timing, air source and the gas flow centralized control system, easy to operate 3, high technology, and is equipped with a digital electronic timing function 4, the instrument uses split, integrated portfolio, easy to move 5, configure a dedicated refrigeration system to meet the needs of low-temperature experiments 6, instrument configuration i dedicated environmental air pump system, no external gas source Technical Parameters 1, power supply voltage: AC220V ± 10% 50Hz 2, FDT foam properties thermostatic bath temperature: 24 ? 93.5 ? 3, the heater power: 2500W (93.5 ? bathtub) 800W (24 ? bath) 4, temperature measurement devices: platinum resistance (PT100) 5, the gas diffusion head diameter: 25.4mm ± 0.02 6, diffuser air permeability: at 2.4KPa (250mmH O) pressure is 3000 ~ 6000mL / min 7, experimental cylinder specifications: 1000mL (special cylinder)

Supplier: Polyethylene foam, polystyrene foam, polyurethane foam, continuous plants for polyurethane foam, PE pipe, PE net, profiling extruders, transverse cutting machines, rotary cutting machines, vertical cutting machines, rebounded PU plants, high impact polystyrene, vacuum forming machines, automatic paper glass machines and paper mesh egg tray plants

Supplier: Hardness tester, portable hardness tester, leeb hardness tester, mini printer, visual microscope, rebound hardness tester, metal hardness tester, dynamic hardness tester

Supplier: Oil, Refrigerated Centrifuge, Bod Incubator, Flash Point Tester , Water Bath, Hot Air Oven , Muffle Furnace, Ring And Ball Tester, Pour Point Bath, Copper Corrosion Bath, Silver Corrosion Bath, Penetrometer, Viscosity Meter, Kinematic Viscosity Meter Bath, Reid Vapour Pressure Tester, Foaming Characteristics Bath, Lpg Corrosion Bath And Bomb Kit, Thin Film Oven, Double Distillation Astm D86, Redwood Viscometer, Saybolt Viscometer, Freezing Point Tester, Crm, Certified Reference Material, Digital Temperature Humidity Pressure Display, Mercury Barometer, Filtration Kit Orsat Assembly And Glassware

Supplier: Chemicals such asTDI/MDI & polyols, foam scrap for rebounded foam
Services: Manufacturing

The recovery plant is specially designed to recover CO2 from fermentation processes at breweries. This complete CO2 plant was installed in 2001 and it has nominal CO2 removal capacity of 1000 kg/h. The plant has Siemens S 7 control system where operation is carried our via a large 12 " color screen panel with Windows CE operating system. This is a complete CO2 recovery plant and final delivery scope depends on buyers needs. The plant has been in operation only approx 5 years and is still installed and in very good condition. The carbon dioxide plants was designed by Danish Union Engineering (www.union.dk ) and the delivery includes following main components: - 1 Scrubber for gas flushing - 2 Foam catcher vessels - CO2 collection, inflammable - 2 Mehrer TZW 70 CO2 compressors - 2 Carbon filters - 2 Dehydrators - CO2 Liquefier - CO2 Storage Tank - 2 Cooling compressors GEA Grasso GD-3 for R717 - Air cooled condenser for NH2 compressors - Alarm center for CO2 and NH3 concentration - Station for 40 kg CO2 still tank filling - CO2 pumping station from a truck to the factory - CO2 purification tester - Steam heated evaporator for liquid CO2 Detailed technical information available for serious buyers