Din Rail Logger

Stick logger supports GPRS, WiFi, 4G, Ethernet and other communication method. Furthermore, stick logger supports RS485/RS232/TTL/USB and other serial communication. With the design of multi-cover, it adapts to a vast majority of inverters. By collecting operating status and power generation of inverter, stick logger can run a long-term and efficient monitoring of PV system, which increases work efficiency and reduces management cost significantly. With its extended functions, such as GNSS, power-off reminder, Bluetooth, stick logger enables a qucik configuration at site and an easy plant O&M. Highlights External indicator lights, ensuring collection status at a glance; Plug and play, no extra power supply is required; Independent module, protecting internal parts of inverter; Waterproof design, resistant to bad weather; External design, easy to replace faulty equipment; Review data and yields via Wavetel Portal at anytime and anywhere; Extended function: Power-off reminder; Extended function: GNSS. Multi-type interface to adapter the main-stream inverters

Provide FF H1 communication ability to Modbus device Support standard DD or EDD specification (FF H1) Electrical interface connected with Modbus device supports TTL level, RS485 and RS232 G0313 Modbus to FF Gateway is a gateway device of Modbus protocol and FF protocol developed by Microcyber. As Modbus master station, G0313 Modbus to FF Gateway communicates with Modbus-RTU device via RS485 interface, and it can convert the data of Modbus-RTU device to FF device variable output. G0313 Modbus to FF Gateway size is 99Ã?22.5Ã?114.5mm, and supports standard DIN rail installation. There is a 3-bit DIP switch for G0313 Modbus to FF Gateway, shown as the following Figure. SIM: Simulation switch, used for simulation function. WP: Write protection, all the write operation for FF smart pressure transmitter shall be refused, which avoid data modification at random. RST: Reset, reset device date to factory original. Power off the device at first, and made the switch at ON, and then power on the device, the device shall be reset to factory original. Modbus to FF gateway is a gateway device supporting Modbus and FF protocol. As FF device, it can communicate with Modbus devices, read Modbus data to FF device by simply configuration, and transfer data to control system through FF bus. Modbus to FF Gateway supports 4 Modbus slave devices, 8 groups of analog input output and discrete input output parameters, totally 32 channels provided. It configures Modbus devices data into transducer blocks parameters via Modbus register, and provides data support for FF system via channels between variables and AI, AO, DI and DO function blocks.

YN-AR41AP-A2 is industrial DIN rail 4G wireless router , wireless support 802.11N, max up to 300Mbps, can be customized according to customer requirements, YN-AR41AP-A2 is based on industrial-grade application of high-performance wireless router. Use the world-leading Atheros solution, the CPU is clocked at 550MHz, wireless supports 802.11N, and it is perfectly compatible with third-party firmware such as OpenWrt to meet customer secondary development. It is also a high-performance 4G wireless router YN-AR41AP-A2 which is completely an industry universal router. Supports wireless, mobile receiver distance is in 50-150M, can wear 2-3 walls. Complies with IEEE 802.11n, IEEE 802.11g/b, and IEEE 802.3/3u standards Wireless transmission rate up to 300M 1 WAN port, 4 Fast LAN ports, all support auto-negotiation and port auto-flip Transmit power up to 27dBm (max) with SKYWORKS and two SE2576 The power network port SIM card holder are with static and surge protection Supports hard watchdog design Support WDS wireless bridging, easy expansion of wireless networks Supports broadband access methods such as PPPoE, dynamic IP, and static IP Automatic dialing, on-demand dialing, scheduled dialing, to meet a variety of dialing requirements Supports SSID broadcast control and MAC address-based access control list Provides 64/128/152-bit WEP encryption and supports WPA/WPA-PSK and WPA2/WPA2-PSK security mechanisms Built-in firewall, support for IP, MAC, URL filtering, can flexibly control access to the Internet and access time Built-in DHCP server can automatically and dynamically assign IP addresses All Chinese/English configuration interface, support free software upgrade Adopting the world-leading Atheros solution, the CPU is clocked at 550MHz, wireless supports 802.11N, and is perfectly compatible with third-party firmware such as OPENWRT to meet customers' secondary development Support Open-Wrt

1. With 4x10/100/1000BaseT(X) PoE ports, and 1x1000BaseX port 2. Up to 30 watts output of each PoE port 3. Smart PoE over current and short circuit protection 4. Intelligent power consumption detection and classification 5. Redundant dual 48 VDC power inputs, Built-in over-current protection, Reverse connection protection 6. -40 to 75C operating temperature range (WT models) 7. No fan, low consumption, industrial design standard, industrial grade electronic components, environmental protection & lead-free production 8. Hard aluminum alloy case(Not sheet metal),DIN-rail and wall mounting 9. IP Rating up to IP40 10. No packet lost in 72 hours full load traffic testing

Supplier: Automation products, switchgears, lamps,lights,switches ,pushbuttons, cables, terminal blocks , din rail, duct.
Services:

Supplier: Power supply, switching power supply, led driver, meanwell distributors, power supplier, power supply manufacturers, meanwell, enclosed, din rail, open frame, specific purpose, pv power, rack power, modular, led driver, led accessory, adaptor, knx, charger.

Supplier: Room thermostat, LED metal pushbutton, grid tie solar inverter, din-rail watt hour
Buyer: Room thermostat

PT-PSE100GFN is a single port midspan Injector with 2 Pair PoE up to 15.4 watts of power at 48Vdc, 0.32 amp. PoE Injector manufacturer:Creative Lianjie Network Technology Designed for the AT powered 15.4W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3at devices. We provide high quality PoE Injector, outdoor PoE Injector, POE for DIN Rail, dc poe injector and soon. Enclosed in an IP40 fire retardant plastic case, designed for indoor use installation with Wall-mounted. It operates with a wide input voltage of 100-240Vac, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables. can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). We are PoE Injector supplier and more information you can view here Parameter PoE Injector for door locks Description Key Features 1. Output: 48Vdc, 320mA, 15.4W 2. Transmission Rate: 10/100/1000Mbps 3. Power Pin: 4/5(+),7/8(-) Part Number PT-PSE100GFN Ports   condition LAN Port*1, AC Input   Port*1, PoE Output Port*1 Regulatory   Compliance  IEEE802.3af  RoHS Compliance  WEEE Compliance Pass Through   Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5 (+), 7/8 () Output Power Voltage: 48Vdc User Port Power: 30W Guaranteen Input Input   Voltage: 100-240Vac Frequency: 50/60Hz Typ Working   Environment Operating   Temperature: 0 to 40 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -20 to 70 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 2000meters AC Surge   Protection Line-Earth   1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical   Characteristics Case: plastic Color: Black Mounting:Wall-mounted IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 135mmX 95mmX 35.4mm  Weight: 400gï¼?0.88lbï¼? LED Indicator Power   Indicator: Green PoE Load Indicator: Green Warranty 2 year Safety   Approvals CE,   FCC

PT-PSE100G-24 is a single port midspan Injector with 2 Pair PoE up to 26 watts of power at 24 VDC at 1100 amp. Designed for the outdoor PoE Injector, such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 0/100/1000Mbps of data rates. Fully comply with IEEE802.3af compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with wall-mounted. It operates with a wide input voltage of 100-240 VAC, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables. Can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). The POE Injector are Enclosed in an IP40 fire retardant plastic case, designed for indoor use, installation with Wall-mounted. We are PoE Injector supplier and more information you can view here We provide high quality PoE Injector, outdoor PoE Injector, POE for DIN Rail, dc poe injector and soon. high quality PoE Injector Specifications Parameter Description Key Features 24VDC   output voltage     Wall-mounted Part Number PT-PSE100G-24 Ports   condition LAN Port*1, AC Input   Port*1, PoE Output Port*1 Regulatory   Compliance     IEEE802.3af     RoHS Compliance     WEEE Compliance Pass Through   Data Rates 10/100/1000 Mbps Output Pin   Assignment and Polarity:     4/5 (+), 7/8 ()     Output Power Voltage: 24Vdc     User Port Power: 26W Guaranteen Input AC   Input Voltage: 100 to 240 Vac     Frequency: 47 to 63Hz (50/60Hz Typ.)     DC Input Current: 1A Working   Environment Operating   Temperature: 0 to 40     Operating Humidity: 20% to 80%, non-condensation     Storage Temperature: -20 to 70     Storage Humidity: 10% to 90%, non-condensation     Operating Altitude: up to 2000meters PoE Surge   Protection Protected   line: 1,2,3,4,5,6,7,8     Common mode surge protection(10/700us): 6KV      Differential mode surge protection (10/700us): 1.5KV  AC Surge   Protection Line-Earth   1.2/50us (8/20us): 2KV     Line-Line 1.2/50us (8/20us): 1KV Mechanical   Characteristics Case:   Plastic     Color: Black     Mounting: Wall-mounted     IP Rated: IP40     Connectors: Shielded RJ-45*2     Size: 134mmX 56mmX 33mm      Weight: 150gï¼?5.3ozï¼? LED Indicator Power   Indicator : Green     PoE Load Indicator : Green Warranty 2 year Safety   Approvals CE/FCC