Our separable connectors for IEC markets are compliant with the equipment bushing standards EN 50180 and EN 50181.
Our separable connectors for IEEE standardized markets are made of EPDM rubber for low tension set and high dielectric strength. Both product lines are IEEE 386 compliant and available with accessories such as test points, cable sealing, grounding kits.
IF you are interested in the spare parts of separable connectors to to connect cables to transformers, switchgear units and motors, please feel free to contact me
Supplier: Cold shrinkable cable accessories, heat shrinkable cable accessories, separable connectors, premold cable accessories, high rate communication seal tubes, epdm tubes, heat shrinkable sleeves and other dozens of products.
Supplier: Stainless steel cable tie, high voltage fuses, surge arresters, separable cable connector, clamps
Supplier: Optical fibre wires, pigtail, patch cord, optical power meter, FTTH, OTDR, PLC splitter, separator PLC, connectors, merger or splicers, (kits) tools optical fiber, ODF
General Introduction • 6 pin self-latching terminal connector (lemo compatible) • Specification (1B shell size) 1. Contact resistance: 4MÙ 2. Working voltage: 830V/DC, 560V/AC • Features 1. They are multi-pith, small-sized, push-pull connection and screened electrical connector. 2. The screened electrical connector can be used safely and conveniently, and can connect and separate quickly. 3. The types of the metal electrical connector: solder and PCB.Socket assemble female. Plug assemble male. 4. According to the surroundings it is divided into general (B) and hermetic (K) type. • Application Communication, electronics and medical equipments. It is specially suited for electrical connectors in some instruments and equipments, which should be screened and be connected and separated frequently. Opp box, paper carton.
General Introduction • LEMO 19 pin medical electric cable connector • Specification (2B shell size) 1. Contact diameter: 0.7mm 2. Contact resistance: 7M 3. Working current: 4A 4. Enviromantal working temperature: -50~+125 degree 5. Insulation resistance: 5000 M 6. Mechanical endurance: at least 5000 times (connection and disconnection). • Application Communication, electronics and medical equipments. It is specially suited for electrical connectors in some instruments and equipments, which should be screened and be connected and separated frequently. Opp box, paper carton.
Description: BLMT shear bolted lugl is connection type power fitting between the wire and equipment, mainly used for non-bearing connection in insulated wire, aluminum wire, ACSR and copper wire. The terminal body is made of a high strength tinned aluminum alloy, and the inner surface of the conductor hole has a mesh concave design. Double shear head bolts are made of special aluminum alloy and are treated with high quality lubricants and are equipped with a special contact ring which can not be removed once the bolt head is cut off. Insert or remove the special insert to adjust the scope of the applicable conductor. These inserts have longitudinal stripes and a positioning slot. This product model is streamlined, suitable for different diameter connection. For example: three models can cover from 25mm2 to 240mm2 conductor. The terminals are suitable for outdoor and indoor applications and can provide different bolt size specifications. Characteristics: Wide range of applications; Compact design; Can be used with almost all types of conductors and materials; Fixed torque and double shear head bolt ensure good electrical contact performance; Can be easily installed by using standard socket wrenches; Using a leading industrial design, enable the perfect installation on mdedim voltage cable of up to 42kV. Installation description: No need specialized tools to install; Only need a socket wrench to complete the installation; Including the provision of inserts; Double shear head bolt design with gradable torque to ensure reliable and firm contact; We recommend the use of a support tool to prevent the conductor from bending; Each connector or cable lug has a separate mounting command. Model No.: BLMT-25/95-13 Cross section range: 25-95 Bolt: M13
Description: blmt shear bolted lugl is connection type power fitting between the wire and equipment, mainly used for non-bearing connection in insulated wire, aluminum wire, acsr and copper wire. The terminal body is made of a high strength tinned aluminum alloy, and the inner surface of the conductor hole has a mesh concave design. Double shear head bolts are made of special aluminum alloy and are treated with high quality lubricants and are equipped with a special contact ring which can not be removed once the bolt head is cut off. Insert or remove the special insert to adjust the scope of the applicable conductor. These inserts have longitudinal stripes and a positioning slot. This product model is streamlined, suitable for different diameter connection. For example: three models can cover from 25mm2 to 240mm2 conductor. The terminals are suitable for outdoor and indoor applications and can provide different bolt size specifications. Characteristics: wide range of applications; Compact design; Can be used with almost all types of conductors and materials; Fixed torque and double shear head bolt ensure good electrical contact performance; Can be easily installed by using standard socket wrenches; Using a leading industrial design, enable the perfect installation on mdedim voltage cable of up to 42kv. Installation description: no need specialized tools to install; Only need a socket wrench to complete the installation; Including the provision of inserts; Double shear head bolt design with gradable torque to ensure reliable and firm contact; We recommend the use of a support tool to prevent the conductor from bending; Each connector or cable lug has a separate mounting command.
Description: BLMT shear bolted lugl is connection type power fitting between the wire and equipment, mainly used for non-bearing connection in insulated wire, aluminum wire, ACSR and copper wire. The terminal body is made of a high strength tinned aluminum alloy, and the inner surface of the conductor hole has a mesh concave design. Double shear head bolts are made of special aluminum alloy and are treated with high quality lubricants and are equipped with a special contact ring which can not be removed once the bolt head is cut off. Insert or remove the special insert to adjust the scope of the applicable conductor. These inserts have longitudinal stripes and a positioning slot. This product model is streamlined, suitable for different diameter connection. For example: three models can cover from 25mm2 to 240mm2 conductor. The terminals are suitable for outdoor and indoor applications and can provide different bolt size specifications. Characteristics: Wide range of applications; Compact design; Can be used with almost all types of conductors and materials; Fixed torque and double shear head bolt ensure good electrical contact performance; Can be easily installed by using standard socket wrenches; Using a leading industrial design, enable the perfect installation on mdedim voltage cable of up to 42kV. Installation description: No need specialized tools to install; Only need a socket wrench to complete the installation; Including the provision of inserts; Double shear head bolt design with gradable torque to ensure reliable and firm contact; We recommend the use of a support tool to prevent the conductor from bending; Each connector or cable lug has a separate mounting command. BLMT-185/400-17 Cross section range: 185-400 Diameter of mounting hole: 17 Bolt: M22
Supplier: LV & MV & HV cable accessories, heat shrink tubes, cold shrink tubes, heat cold shrink moulded shapes, separable connectors and kits
Buyer: Silicone rubber