Parameters
Finish:
Gloss:
Application
Methods
Substrate
Exposure
Formulation
Parameters Finish: Gloss: Application Methods Substrate Exposure Formulation
Parameters Finish: Black Gloss: 95% Application Methods: Spray Substrate: Rubber, Mango, MDF Exposure: Formulation
Parameters Finish: Gloss: Application Methods Substrate Exposure Formulation
Parameters Finish: Gloss: Application Methods Substrate Exposure Formulation
Parameters Finish: Gloss: Application Methods Substrate Exposure Formulation
Ritver Powder Coating is a Italian product manufactured in Dubai UAE for Africa and Asia markets. Powder coating is categorized in: Class 1,2 and 3 (for metal intrusions- aluminium, cast iron and steel) Class 1 POLYESTER : Standard Powder Coating with upto 150 color codes as per RAL systems with a warranty of up to 20 years Class 2 EPOXY: Super Durable (for exterior and interior) for up to 45 RAL color shades Class 3 EPOXY-POLYESTER:Hyper Durable (for high end structures to protect from UV), Recommended for high rise structures, aviation and metro- locomotive industries Available in Full Gloss: 90/Gloss: 77/Semi Gloss: 35/Matt: 25/Dead Matt:15% in soft textured, standard texture and coarse finishes Product is available in 20kg packing
Ritver Powder Coating is a Italian product manufactured in Dubai UAE for Africa and Asia markets. Powder coating is categorized in: Class 1,2 and 3 (for metal intrusions- aluminium, cast iron and steel) Class 1 POLYESTER : Standard Powder Coating with upto 150 color codes as per RAL systems with a warranty of up to 20 years Class 2 EPOXY: Super Durable (for exterior and interior) for up to 45 RAL color shades Class 3 EPOXY-POLYESTER:Hyper Durable (for high end structures to protect from UV), Recommended for high rise structures, aviation and metro- locomotive industries Available in Full Gloss: 90/Gloss: 77/Semi Gloss: 35/Matt: 25/Dead Matt:15% in soft textured, standard texture and coarse finishes Product is available in 20kg packing
ACRYLIC TOP COAT it is an acrylic resin based premium top coat for metals. It has exceptional color and gloss retention in a variety of climatic condition. PROPERTIES Colour : full range Solids: 38 + 2 % Theoretical Coverage 9 â??12 m2/Lit Recommended (Dft) : 30 - 40 Microns/ per coat Recommended (Wft) : 90-100 Microns/ per coat DRYING TIME â?? AT 25 �° Surface Dry: 5-10 mins To Recoat: 3 â?? 4 hours Vehicle type: Modified alkyd Specific gravity: 1.15 �±0.05 (depends on color)
Easy To Apply Single Pack Superior Durability Excellent Gloss Retention SCOPE USES Kisomin Aluminium Paint is a modified Synthetic Resin based enamel. It provides high Light fastner and brightness with excellent orientation finish. it has good adhesion on interior or Exterior surfaces. Recommended as a decorative finish coat & can be applied on surfaces like Grill, Windows, Cabinets & wide range Metal Structures. FEATURES/ BENEFITS * Smooth durable finish. * Smooth flow & easy to apply. * Excellent coverage & hiding. * Superior surface protection KEY ATTRIBUTES * Application temperatures : 10-44 degc VISCOSITY FOR APPLICATION * For Brushing 40"-45" at 30C * For Spraying 18" 20" at 30C * For Roller 55"-60" at 30C SURFACE PREPARATION APPLICATION BRUSH CONVENTIONAL SPRAY NOTES : HEALTH & SAFETY Steel : Sand the surface with coarse Sand / water paper according to the type of surfaces to remove rust, dust & other foreign particles. System of Coating should be selected depending upon the type of substrate. Wipe to clean the surface. Apply single coat primer & allow to dry. Re sand the surface with Sand paper & wipe to clean. Apply 2nd Coat of primer & allow drying for overnight. Before application of paint, thin down to achieve desired viscosity & filter through white cloth. Apply Kisomin Paint to finish. Stir the base thoroughly and then mix to uniform consistency. Apply by diluted material, where viscosity has to be ensure 40-45 sec by f.c. B4 Add Kisomin thinner to adjust viscosity depending on spray condition. Use any standard equipment at an atomizing pressure of 3.5-4.5 kg/cm. 1. Use off the mixed paint . 2. Do not apply when temperature falls below 10c or rises above 50c and when relative humidity rises above 90%. Do not apply during rain, fog or mist 3. Brushes and spray equipment should be cleaned with Thinner, 4. Special care to be taken to close immediately the partly used Diluted Material. Please refer to the separate Material Safety Data Sheet available with detailed information
