H&y Wood

"Input power Plasma:380V Equip:220C Model H&H 1325
Machine power 8500W Working area 1300*2500
Cutting speed 10m/min File format nc, G code
Cutting Thickness 0-6mm Control DSP handle
Frequency 50Hz Working Non-contact striking arc
Electric current 60A Metal Stainless, aluminum, galvanized"

Product features

The machine can process logs, branches and board edges into shavings. The shavings produced by the machine are the same as those produced by the furniture factory. They are fully automatic feeding equipment, which greatly improves the production speed and saves time and manpower.

Application: Animal bedding
Number of cutter heads: 4
Power(W): 100.1kw
Voltage: 380v
Capacity: 3000kg/h
Weight: 8000kg
Dimension(L*W*H): 5.6*2*2m
maximum log input width: 1.2m
maximum log input length: 2.7m
Warranty: within 1 year
Shaving depth: can be adjusted
Product features

The machine can process logs, branches and board edges into shavings. The shavings produced by the machine are the same as those produced by the furniture factory. They are fully automatic feeding equipment, which greatly improves the production speed and saves time and manpower.

Application: Animal bedding
Number of cutter heads: 4
Power(W): 100.1kw
Voltage: 380v
Capacity: 3000kg/h
Weight: 8000kg
Dimension(L*W*H): 5.6*2*2m
maximum log input width: 1.2m
maximum log input length: 2.7m
Warranty: within 1 year
Shaving depth: can be adjusted

Measurements: L: 22cm x W: 8.5cm x H: 10.5cm OR CUSTOMIZE

Material: Ash & Beech Wood

Age Guide & Safety: Recommended for 3 years +. Our toys are safety tested and certified, however we always advise that toys be checked prior to play and recommend adult supervision during playtime. Not suitable for children 3 years and over who still have a tendency to put things in their mouth.

H-beam 20

Length: 1.9m-5.9m
Standard size:20cm(height)x8cm(width)x4cm(flange thickness)x27mm(web thickness)
Flange: sawed-pine or spruce,
Web: birch or poplar or larch plywood as web.
Treated by wbp glue exterior used weather &water-proof coated by antiseptic & water-proof yellow painting.

e equipment was manufactured by Jeffrey Rader AB, Sweden in 1995 and it is in very good operational condition. It consist of two heavy duty rolls with removable profilied surfaces which rotate towards each other and presses overzised wood chips between the profiles. Roll drives 2 x 110 kW / 1500 rpm connected with two gearboxes. Hydraulic pump 7.5 kW, capacity 220 m3/h wood chips.

The equipment was manufactured by Jeffrey Rader Inc, Sweden in year 1995, manufacturers type is DynaYield 80-300 and it is in good operational condition. The Chip Conditioner consists of two heavy duty rolls with removable profiled surfaces. They rotate towards each other and pull the oversize chips between them. The profiled surfaces are aligned so that the pyramid apexes on one roll travel in the valleys of the apexes on the adjacent roll. With normal oversize wood, the Conditioner typically generates less than 1% fines and 3% pins
The normal application for the Chip Conditioner is in a chemical pulping process, processing the oversize materials by fissuring the wood chips parallel with the grain to allow the cooking liquors to penetrate the chip, and allow the oversize chip to cook as an acceptable size chip. Another application is in a thermo-mechanical pulping process (TMP), as a preconditioning
An important feature of this machine is its ability to handle small portions of tramp without going off-line. With the so called Dynagage Conditioner, the dynamic roll is allowed to move away from the static roll, and once the tramp is through the unit, the roll automatically moves back to the proper set point without shutting down the flow and together with slow rotation speed enable were low down time and maintenance costs. Roll distance movements are made with a hydraulic system build on the equipment and controlled by 3 position sensors
More information on requests, for spam protection please introduce yourself properly.

Technical data:
Model: RDY 80-300
Manufacturing year: 1995
Capacity (throughput): 220 m3/h loose wood chips
Press roll diameter: 915 mm
Roll length: 2440 mm
Roll motors: 2 x 110 kW / 1500 rpm / 690 V – 50Hz
Press distance between the rolls: 2.2 mm
Gearboxes: 2 x Kipo Benzler TV 512
Hydraulic pump: Rexroth 200 bar with Mecman syliders
Electric motor for hydraulic pump: ASEA 7.5 kW
Weight: 33 000 kg
Length: 5083 mm
Width: 2550 mm
Height: 2400 mm.

Frame: Legs: solid wood OAK; Metal structure;
chair frame polyurethane. Size H: 85; L: 44; W: 42; H.S: 48 cm

Teak wood



Product (w x l x h) : 205 x 310 x 100 mm
Outside carton : 275 x 380 x 450 mm
Inside carton : 245 x 350 x 140 mm

The console made from oven dry teak wood

The top of console could be modified with bamboo resin top, and coconut shell with variation balck and white , mozaik stone. available in medium brown color and light yellow , dark brown



The small size w;50 x l; 150 x h ; 60
The price including packaging and shipping not including