Falcon Premium 200 mm (8) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked in stainless steel stator shell. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set - SS-304 Grade investment casting bowl and SS-304 grade impeller in radial flow series - 20 Mtr. Head per stage in radial flow series - Specially designed high performance thrust bearing (SS-420 Tilting pad with carbon plate) to with stand axial thrust loads - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Special designed thrust bearing to withstand high axial thrust load - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures services feasibility - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps - Fully SS Pumps are available Specification Direction of Rotation : Counter clockwise from driving end -1ph : Electrically Reversible -3ph - Power Range : 7.5 kW to 75 kW (10 HP to 100 HP) - Version : Three Phase 350 to 415V, 50Hz AC Supply - Thrust Load : 7.5 kW -30 kW -10000 lbs - Speed : 2880 RPM - Head Range : 12 Mtr. To 440 Mtr. - Discharge Range : 2400 LPM to 300 LPM - Outlet Size in Inch : 4.0" & 5.0" - Degree of Protection : IP 58 - Minimum Cooling Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : Star Delta (SD) - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
V3 SUBMERSIBLE PUMPS (ALL RANGES) V4 SUBMERSIBLE PUMPS (ALL RANGES) V6 SUBMERSIBLE PUMPS (ALL RANGES) V8 SUBMERSIBLE PUMPS (ALL RANGES) V10 SUBMERSIBLE PUMPS (ALL RANGES) V12 SUBMERSIBLE PUMPS (ALL RANGES) MINI MONO BLOCKS (ALL RANGES) OPEN WELL (ALL RANGES) MONO BLOCKS (ALL RANGES)
V8 Mix Flow Submersible Pumpset MATERIAL OF CONSTRUCTION: Shaft : S.S. 420 / S.S. 410, Motor Body : Stainless Steel, Impeller : S.S. 410 / S.S. 304, Casting Parts : Graded Casting, Thrust Bearing : Carbon With Stainless Steel. TECHNICAL DETAILS: Head Range : Up To 300 mtrs, Discharge Range : Up To 2350 lpm, Delivery : 75 mm / 100 mm, Power Rating : 10 H.P. TO 75 H.P., Voltage Range : 350 V TO 440 V (3-Phase).
V8 Redial Flow Submersible Pumpset MATERIAL OF CONSTRUCTION: Shaft : S.S. 420 / S.S. 410, Motor Body : Stainless Steel, Impeller : S.S. 410 / S.S. 304, Casting Parts : Graded Casting, Thrust Bearing : Carbon With Stainless Steel. TECHNICAL DETAILS: Head Range : Up To 320 mtrs, Discharge Range : Up To 1150 lpm, Delivery : 75 mm , Power Rating : 10 H.P. TO 75 H.P., Voltage Range : 350 V TO 440 V (3-Phase). SALIENT FEATURES: Easy To Install, Highly Efficient Motor & Pump, Law Power Consumption, Specially Design For Wide Voltage Range, Corrosion Resistance Stainless Steel Motor & Pump Body, Use Graded Varnish To Reduce Corrosion In Stator, Rotors Are Dynamically Balanced With More Than 2850 rpm To Reduce Vibration, Long Life And Negligible Maintenance Due To High Precision Work, Rotor Are Painted With Special Epoxy Paint For Prevent Corrosion Effect For Long Time, Noiseless & vibration free motors, All Parts Machined On CNC Machine Only
Submersible Pumps & Motor Set Wide Range Of Submersible Pumps, Openwell Pumps, Centrifugal Monoblock Pumps, Self Priming Pumps Available. All Running Models Are Available With ISI & Star Rating Marks.
Nema Standerd Submersible Pumps And Motor Available 4" & 6" Submersible Motors & Pumps with NEMA Standerds. Available Customised Design For OEM Supply Also. SALIENT FEATURES: Easy To Install, Highly Efficient Motor & Pump, Law Power Consumption, Specially Design For Wide Voltage Range, Corrosion Resistance Stainless Steel Motor & Pump Body, Use Graded Varnish To Reduce Corrosion In Stator, Rotors Are Dynamically Balanced With More Than 2850 rpm To Reduce Vibration, Long Life And Negligible Maintenance Due To High Precision Work, Rotor Are Painted With Special Epoxy Paint For Prevent Corrosion Effect For Long Time, Noiseless & vibration free motors, All Parts Machined On CNC Machine Only
V4 Submersible Pumpset (Fabricated Pump)
Supplier: Submersible pump, motor, pipe, cable
V8V9 MRS
