Attention. Looking for serious buyers. EN590 10ppm NWE Platt Price, with -10 % in Discount
1. The Buyer Issue ICPO, C/P to the Seller along with the CPA.
2. The Seller issues Commercial Invoice for the available quantity in the Sellerâ??s Storage Tank to the Buyer along with the Commitment to Supply
3. The Buyer signs and returns the CI to the Seller with the buyers vessel information and details of port clearance through the nominated vessel terminal.
4. Upon receipt and confirmation of the vesselâ??s information the Seller issues the POP documents as below and send to the Buyer within 48 hours:
a. Fresh SGS (not older than 48 hours)
b. DTA (Dip Test Authorization)
c. Certificate of origin
d. Tank Storage Receipt (TSR)
e. ATSC â?? Authorization to Sell and collect
f. Injection Report
g. NCNDA/IMFPA.
5. The Buyer conducts Dip Test in the Seller's Reservoir. Upon successful Dip Test, the injection commences immediately into buyers vessel as scheduled.
6. Within Twenty-Four (24) hours, Buyer issues 100% TT wire transfer payment to the Seller.
The Seller transfers the title ownership to the Buyer.
7. The Seller pays commission to all the intermediaries the buyer and seller.
8. The Seller issues 12 Months Contract for the Buyerâ??s review and execution
TTT procedure: EN590 10pm price $460/MT, Jet fuel A1 price $76/BBL (1) FREE ON-BOARD TRANSACTION PROCEDURE - (TANK TO TANK). Rotterdam, Houston, Fujairah, Jurong, Ningbo-Zhoushan 1. Buyer issues an official ICPO with the seller's procedure, passport copy, banking details along with their Tank Storage Agreement "TSA". 2. Seller issues their Commercial Invoice "CI" to the buyer, Buyer signs and returns the commercial invoice to the seller along with an Acceptance Letter of the sales and purchase procedure. 3. Seller verifies the buyer's storage facility and their Tank Storage Agreement (TSA) with the port authority. (NB: Seller will issue a Tank-to-Tank Injection Agreement (TTIA) to be signed by all parties only if buyer's TSA is engaged, not active or cannot be verified with the local port authority). 4. Seller issues all POP documents below to the buyer upon a successful verification and approval of the buyer TSA or after receiving the TTIA fully signed by all parties: a. Injection Report. b. Product Passport. c. 24 Hours SGS Report. d. Product Certificate of Origin. e. Tank Storage Receipt (TSR). f. Authorization to sell and collect. g. Unconditional Dip-Test Authorization. h. Product Title Holder Transfer Agreement. i. NCNDA/IMFPA. 5. If required buyer may inspect by SGS (Dip Test In Tanks) at buyer's expense. 6. Upon successful verification of POP or Dip Test in the seller's tank, buyer provides Tank Storage Receipt (TSR) to seller in order to issue the scheduled Injection Programming (IP) to be signed by buyer storage facility and then injects the product into buyer's tanks. 7. Buyer makes the payment for the product via MT103, seller transfers the Title Holder & Ownership of the product to the Buyer. 8. After successful Trial Lift (First Lift), Seller issues SPA/Contract for 12 months with R&E to Buyer for processing. 9. Seller pays commissions to all intermediaries involved, for the initial lift and all subsequent lifts according to the signed NCNDA/IMFPA.
Product Description - EN590 10ppm Price of product ( USD price or FOB price) - Market Price Product origin - Oil is from a top global petroleum oil producer Key Specifications/Special Features - Price will be quoted FOB and in USD. Minimum Order Size and Packaging details - Quantity of oil shipment must be worthy for transport on ships that transport crude oil and petroleum products in international waters.
COMMODITY: EN590-10ppm ORIGIN: NETHERLANDS DELIVERY: FOB ROTTERDAM LOADING / ROTTERDAM QUANTITY TRIAL: 100,000 MT QUANTITY MONTHLY: 200,000 MT CONTRACTUAL (Long-Term 3 TO 5 YEARS) QUANTITY CONTRACT: ROLL & EXTENSION CONTRACT LENGTH: MINIMUM 12 MONTHS / 52 WEEKS SPECIFICATION: Fresh SGS Report QUALITY: Â As Per Inspection DISCOUNT: -USD 70 TO USD 80 (from the West European Pallet Price) PROCEDURE: End buyer sends his ICPO, CIS, TSA, or CPA and approved procedure by buyer. Ministry of Energy start due diligence. After approval of due diligence, the buyer will receive a confirmation through the XXXXXXXX. After exchange of the bank coordination of the supplier/seller, XXXXXXX. The buyer will start official BANK TO BANK communication to send his BCL and proof of Funds. BCL, POF is equivalent to two times delivery After confirmation of BCL, POF the SELLER / SUPPLIER sends FRESH SGS to the BUYER. The BUYER verifies the fresh SGS report via his logistic company or any other organization he wants. Finally, start the DIP Test in Seller / Supplier tanks and after that immediately pay for inspections and seal the product in the Tank of the SELLER / SUPPLIER. Then exchange the final document and the buyer receives the title. The above is for 1x trial and 12x contract Note: For the contract of 12x delivery, we donot ask any LC, DLC, or SBLC. Because our seller right now operates on behalf of the government. It means,
EN590 10PPM OFFER Price:$530/MT 1. Buyer issue ICPO and TSA containing the seller's working procedure with scanned copy of buyer's passport along with buyer Company certificate of incorporation. 2. Seller issues commercial invoice of the product in tanks at the port, to be sign along with the attached below partial proof of products. 3. Upon receipt of the signed CI and ATV from buyer storage tank for verification seller issue the below pop documents. -48 hours fresh SGS -INJECTION REPORT -BILL OF LADDING. -TITTLE OF OWNERSHIP TRANSFER -TSR OF WHERE THE PRODUCTS STORE TO VERIFY PHYSICALLY. 4. Buyer inspects by SGS on buyer s expenses and sends TSR. 5. Upon successful dip test in tanks, product will immediately be injected into Buyer's tanks. Buyer makes payment for the product via MT103/TT POINT NO 1,2,3 Is most important . If u can provide then can deal . If not do not waste time 1) Icpo 2) TSA 3) ATV
PROCEDURE ON CIF BASIS Product EN590-10ppm MOQ : 50.000MT per shipment PRICE : US$480/MT Commision : US$ 5/ MT for Buyer's Side US$ 5/ MT for Seller s Side 1.The buyer sends the ICPO along with a Company Profile and passport copy of bearer. 2. Seller acknowledges buyer's ICPO and issues Contract to buyer open for amendment, buyer signs and returns the Contract to the seller. 3. Seller makes the final signature on the Contract and sends the final approved, endorsed to buyer. Within 2-3 days seller issue partial PPOP document to buyer as follow: a) statement of availability of product b) product certificate of origin c) commitment to supply d) product passport 4.Buyer's bank in accordance with seller's verbiage issues agreed payment instrument SBLC MT760 /DLC MT700 within 7 working days for the product value and seller's bank issues operative 2% PB in favor of buyer. If buyer fails to issue SBLC/DLC within the validity date, the buyer will be obliged to secure the product allocation until the instrument is in place. 5.Whereby buyer could not meet up with the instrument, buyer will negotiate with refinery a refundable guarantee deposit in replacement for instrument. Refinery-supplier will send Charter Party Agreement [CPA] details to buyer confirmation and endorsement. 6. Refinery-supplier release FULL set of PROOF of document accordingly to the below and performance bond guarantee to buyer bank and upon confirmation receipt of full POP document, against shipping documents/ inspection by SGS or CIQ at discharge port upon the arrival of the vessel at the port of delivery, after quantity and quality of the product is checked and confirmed. a) copy of products certificate of origin b) copy of statement of availability of the product c) copy of export license certificate d) copy of CPA to transport the product to the loading port e) copy of port storage agreement f) copy of the vessel questionnaire 88 g) copy of tank storage receipt (TSR) h) copy of the charter party agreement with the shipping company i) copy of bill of lading (BL) j) fresh cut SGS report/ dip test letter 7. Buyer bank releases payment to seller bank within 5 days via MT 103 T/T wire transfer after inspection of product at discharge port and receipt of all the shipping documents as indicated below and seller pays all the intermediaries involved
SGS VERIFICATION THEN SELLER TANK EXTENSION WE SUPPLY EN590 10PPM ORIGIN KAZAKHSTAN LOCATION FOB ROTTERDAM FOB HOUSTON FOB FUJAIRAH FOB JURONG PROCEDURE SELLER TANK EXTENSION PRICE 360$ MT/FOB WITH 2.5$ COMM TO BUYER SIDE PAYMENT DIP AND PAY DOCUMENT ICPO TO START ref neft PRICE BEING UPDATED ONCE A WEEK
EN590 10ppm 100,000MT ~ 200,000MT (TTV) * Pick up from Fujairah Origin: Azerbaijan FOB PROCEDURE (Tank To Vessel) 1. The buyer issue ICPO and the CPA. 2. Seller release the commercial invoice within 48 hours. 3. The buyer sign and return the C.l to seller 4. Seller issue the p-pop document as below A) Fresh SGS. B) Product Quality passport C) Certificate of origin D) Commitment to supply E) Statement of product availability 5. The Buyer provides ATI and Q88 from his or her shipping company 6. Seller issue unconditional dip test authorization, TSR to buyer, buyer conduct dip test in seller tank at buyer cost 7. After a successful dip test in the seller's tank, the buyer makes 100% payment for the fuel via MT 103/TT to the seller within 24 hours. 8. After payment, the seller begins pumping fuel into the buyer's vessel. 9. After the successful injection seller issue A) Allocation license B) Title ownership transfer affidavit. 9. After receiving 100% payment, all intermediaries receive payment from the Seller and Buyer through a signed NCNDA - IMFPA agreement.
EN590 10ppm 100,000MT ~ 200,000MT (TTV) * Pick up from Fujairah Origin: Azerbaijan FOB PROCEDURE (Tank To Vessel) 1. The buyer issue ICPO and the CPA. 2. Seller release the commercial invoice within 48 hours. 3. The buyer sign and return the C.l to seller 4. Seller issue the p-pop document as below A) Fresh SGS. B) Product Quality passport C) Certificate of origin D) Commitment to supply E) Statement of product availability 5. The Buyer provides ATI and Q88 from his or her shipping company 6. Seller issue unconditional dip test authorization, TSR to buyer, buyer conduct dip test in seller tank at buyer cost 7. After a successful dip test in the seller's tank, the buyer makes 100% payment for the fuel via MT 103/TT to the seller within 24 hours. 8. After payment, the seller begins pumping fuel into the buyer's vessel. 9. After the successful injection seller issue A) Allocation license B) Title ownership transfer affidavit. 9. After receiving 100% payment, all intermediaries receive payment from the Seller and Buyer through a signed NCNDA - IMFPA agreement.
EN590 10PPM FOB Rotterdam / Fujairah Tank To Vessel Refinery Tank To Vessel/dip & Pay Procedure 1. Buyer issues official ICPO addressed to the refinery or representative. 2. Seller issues Commercial Invoice (CI), buyer signs and returns the signed invoice to the seller. 3. Seller issues to the buyer the partial proof of product documents: ATSC - Authority to sell and collect Seller TSR DTA - Dip Test Authorization PRODUCT PASSPORT - Product analysis report from a renowned inspection company. Statement Of Product Availability Duly Signed AND Notarized By The Appropriate Authorities. Commitment Letter To Supply ATV Authority to verify the existence of the product via email or phone call. 4. Buyer obtains port and terminal access permit through the tank farm in order to gain access to conduct dip test 5. After a successful Dip Test in Sellerâ??s tanks, Buyer takes over seller's tank or Seller injects into buyer's vessel / Tank and buyer conducts its DIP TEST Inspection for Q & Q of the Petroleum Products aboard vessel / Tank. 6. Buyer after a successful Q &Q Dip test on the product, the buyer makes the payment for the total value of the product injected into the tanks through the means of MTI03 - TT. 7. Upon seller receives the payment for the product from the buyer, the seller issues to the buyer the Title ownership of the product and all exporting documents of the Product. The seller pays all intermediaries involved in the transaction
