has been successfully producing composite hammers and vertical mill internals for many years. Composite parts are reinforced with very hard ceramic inserts at the wear zone. Meanwhile, the remaining part is left ductile because the base material is also relatively ductile.
Consequently, the ductility of the base material is combined with the wear resistance of the ceramic inserts. Our composite parts succeed in improving the service life of conventional monometallic parts by several multiples.
can produce bimetallic hammers tailor made for various types of crushers. Bimetallic hammers consist of two different kinds of materials, a tough material in the shaft and a hard and wear resistant material in the working area. The part is produced with a unique method so that the two materials are bonded together like one single piece. A bimetallic hammer is resistant to breakage in the shaft area and is resistant to wear in the working area. The use of bimetallic parts can increase wear resistance and service life, and decrease downtime and maintenance cost significantly, which is especially useful in applications where different mechanical properties in different areas of the part are required.
AINiCo is composed primarily of Aluminum Nickel Cobalt and also Copper and Titanium. They are manufactured through either casting or sintering process. Cast AINiCo may be manufactured in complex shapes such as horseshoes not possible with other magnet materials. Sintered AINiCo offer slightly lower magnetic properties but better mechanical characteristics. it can be efficiently magnetized in any direction, and for anisotropic AINiComagnet, it generally has greater magnetic capacitive in a preferred orientation than isotropic types. AINiCo is hard and brittle, Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances. â?¢ Advantages of AlNiCo Magnet: 1.Customized designs are available. 2.Max working temperature can be as high as 550�°C. 3.Disadvantage: Br and BH(max)are not as high as rare earth magnet. 4.High energies and relatively low coercivity. 5.High magnetic flux density; low mold charge stable temperature properties; easy to shap.
Supplier: Plastic rope, plastic pallet, steel profile, steel parts, wood plastic composite panel, floor, baling twine, bathroom and tiles,
Services: New product development engineering service, sourcing, price negotiations, quality check, factory visit, transportation,
We supply all kinds of Cast Iron Scrap with good price and good service.All the product is available contact us for more details. Cast Iron Scrap for sale. Free from mud, dust, fluff, non ferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings, any organic waste and any other harmful substances. Dirt, dust rust, fluff and other impurities not allowed over 1%. Type: HMS Scrap Composition: iron Scrap Metal Application: Melting HMS Type: HMS1 & 2 Packaging Details: Bulk and Customers preferences d) All scraps shall be free of explosive and oily materials and woody substance in any event. e) Packing arrangement: In break bulk.
Heavy melting steel is a designation for recyclable steel. It is categorised into two major categories: HMS 1 and HMS 2. The difference between the two is HMS 1 does not contain galvanized and cast iron, whereas HMS 2 does. Because both grades guarantee a minimum piece thickness â?? at least 1/4inch (6.3mm) for HMS 1, and 1/8 in for HMS 2 â?? consignments have a high density. The typical constituents are plates, truck parts, structural items, large machinery parts, automatic parts, pipes, post consumer steel goods. Chemical Composition: C:0.06 â?? 0.082% Mn:0.75 â?? 1.05% SI:0.13 â?? 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15%
Supplier: Brass, Aluminum Precision Part
Casting Process:Resin sand casting line or "V" method casting line Dimension Tolerance: CT9 Surface Roughness: Ra6.4~12.5 Casting Weight: 300-2800 KG Standard: ASTM, AISI, DIN, BS and JIS certificate:ISO9001 and AQA Total Capacity: 6000T/month Material:ductile iron, gray iron etc. we are leading Sand casting , manufacturer & supplier in carbon steel & ductile iron and gray iron casting parts, we can do casting & machining &paint by oueself. Excellent casting parts are exported to markets in Europe, America and all of the world. OEM casting service available according to customers requirements. Casting Process:Resin sand casting line or "V" method casting line Dimension Tolerance: CT9 Surface Roughness: Ra6.4~12.5 Casting Weight: 300-2800 KG Standard: ASTM, AISI, DIN, BS and JIS certificate:ISO9001 and AQA Total Capacity: 6000T/month Material:ductile iron, gray iron etc. we are leading Sand casting , manufacturer & supplier in carbon steel & ductile iron and gray iron casting parts, we can do casting & machining &paint by oueself. Excellent casting parts are exported to markets in Europe, America and all of the world. OEM casting service available according to customers requirements.
Supplier: Aluminum Extrusion, Aluminum Casting
Customizes And Processes All Kinds Of Extruded Aluminum Profiles
Buyer: Extruded Aluminum Profile
Supplier: Rigging, plastic products, composition material, electric appliance fitting, non-ferrous metal processing.
