Globe Control Valve Globe valve are designed strictly on the basis of the IEC standard. They are the latest self-innovated modularized straight stroke control valve of SUPCON. We divide the trims into three modules, namely guide, control and seal module. We provide the best solution according to the function of each module and make action, control and seal more reliable. Each index, linear, hysteresis, dead zone and leakage, for example, is full compliance with national standards. Cage guided valve Note: For below measured results, take LN8100 top guide single seat valve (PN110) as an example. Test Items National Standard SUPCON Standard Measured Results Seat Leakage 0.06 L/min 0.064 L/min 0.01L/min Rated Travel Error +2.5% +2% 1.32% Start Error ±2.5% ±2% 0% End Error ±2.5% ±2% 0.08% BasicError ±1.5% ±1% -0.52% Hysteresis 1.5% 1% 0.16% Dead Band 0.6% 0.4% 0.38%
The valve seat is made of high chrome molybdenum alloy that introduced by internal-combustion engine academe of uk which is the technology by the 90f+s, according to the situation of country, shanghai internal-combustion engine developed a new technology again which is melted by high temperature. So this material are be of high attrition endurance, high temperature endurance and high erosion endurance. Under normal condition, this product can make the engine drive 150~300 thousand kilometers. Our valve seats are suitable for engines imported from europe, america, japan, korean and so on, they are of the best quality and have the competitive price in home and abroad.
Materials:FC-25 We have a wide range of products and models for your selection. All products are produced under strict quality control, and development ensures that you are getting the latest products with the most advanced and cost effective technologies.
Price of product ( USD price or FOB price) : Starting From 0.5 US$ Product origin : Rajkot, Guj rat, India Minimum Order Size and Packgaing details : 500 Pcs Packing In 4,6,8,12 Pcs
A valve guide is a cylindrical piece of metal, pressed or integrally cast into the cylinder head of most types of reciprocating engines, to positively locate a poppet valve so that it may make proper contact with its valve seat.
Cage Guided Valve
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
Hydraulic end assembly AH0501010500 AH35001-05.00 Sealing washer AH0501010203 AH35001-02.03 Hydraulic end assembly AH0801010500 AH34001-05.00 Sealing washer AH0801010203 AH34001-02.03 Hydraulic end assembly AH1001010500 AH33001-05.00 Sealing washer AH1001010203 AH33001-02.03 Exhaust filter assembly AH0501011400 AH35004-11.00 Inner ring AH0501010204 AH35001-02.04 Exhaust filter assembly AH1001011900 AH33014-04.00 Inner ring AH0801010204 AH34001-02.04A Cross head assembly AH0501010400 AH35001-04.00 Inner ring AH1001010204 AH33001-02.04 Cross head assembly AH0801010400 AH34001-04.00 Outer ring AH050101020500 AH35001-02.05.00 Cross head assembly AH1001010400 AH1001010400 Outer ring AH080101020500 AH34001-05.00 Pinion shaft assembly AH0501010300 AH35001-03.00 Outer ring AH100101020500 AH33001-02.05.00 Pinion shaft assembly AH0801010300 AH34001-03.00 connecting rod AH0501010206 AH35001-02.06 Pinion shaft assembly AH1001010300 AH33001-03.00 connecting rod AH0801010206 AH34001-02.06 Crankshaft assembly AH0501010200 AH35001-02.00 connecting rod AH1001010206 AH33001-02.06 Crankshaft assembly AH0801010200 AH34001-03.00 Cylinder assembly AH050101050100 AH35001-05.01A.00 Crankshaft assembly AH1001010200 AH33001-02.00 Cylinder assembly AH100101050100 AH33001-05.01A.00 Power end lubrication assembly AH0501010600 AH35001-06B.00 Cylinder head flange AH0501010502 AH35001-05.02 Power end lubrication assembly AH0801010600 AH34001-06C.00 Cylinder head flange AH1001010502 AH33001-05.02 Power end lubrication assembly AH1001010600 AH33001-06C.00 Cylinder head AH0501010503 AH35001-05.03A Spray pump assembly AH0501010800 AH35001-08B.00 Cylinder head AH1001010503 AH33001-05.03A Spray pump assembly AH0801010800 AH34001-08B.00 Cylinder liner sealing ring AH0501010504 AH35001-05.04 Spray pump assembly AH1001010800 AH33001-08C.00 Cylinder liner sealing ring AH1001010504 AH33001-05.04 Random tool AH0501011500 AH35001-20.00A Cylinder head plug AH050101050500 AH35001-05.05A Random tool AH0801011400 AH34001-15.00A Cylinder head plug AH100101050500 AH33001-05.05A Random tool AH1001012100 AH33001-31.00A Sealing washer AH10010109 AH33001-09
The LN8 series sleeve-guided control valve is a sleeve-guided, pressure-balanced single-seat control valve. It is TV ISO 15848 certified in 2019. It has a split sleeve construction and a high performance balanced seal ring seal. Suitable for fluid control in ambient and priming conditions. Bellows seal type is available. Thousands of applications in the fine chemical, petrochemical, pharmaceutical and other industries. Performance advantages Modular design concept, combining the and of high-precision control and the school of modular concept. The cage valve inner cavity of the valve body is S-shaped distribution, smooth and without dead ends; there are guide wings inside the valve body, which can reduce the mutual force of the medium inside the valve body and reduce the occurrence of cavitation. The use of sleeve guidance, large guide diameter, smooth guidance, with good dynamic stability. The cage valve seat adopts floating design, while the sealing surface adopts tapered form to ensure good alignment of the sealing sub. Sleeve window control flow characteristics, flow characteristics control accurately. The structure of the inner part is balanced, allowing a large differential pressure, small operating force and large flow capacity. Equipercent, linear and quick-open flow characteristics are available. Good use in the temperature range of -80 to 593 And pipeline connection with RF, RJ, FM and other flange type and SW, BW welding type. The flange distance conforms to GB/T 17213.3-2005 / IEC 60534-3-1:2000; or ISA S75.03-1992 standard. Cage Valve Part 1. Valve Trims According to the needs of the working conditions, different materials and surface hardening treatment can easily be chosen to meet the requirements of each function module of trim to improve its performance of the corrosion, cavitation and erosion resistant, lengthen service life. 2. Valve body The body of LN8 series control valves consists of two passages from upper and lower, forming a shape like letter S. The design of an elliptical section reduces the flow resistance and turbulent flow to keep the flow fluent. The flap in the middle of upper passage can reduce the eddy flow and increase the flow capacity. LN81 Series Single Seat Globe Control Valve 3. Actuator The standard mate of LN8 series is AM8 Multi-spring pneumatic diaphragm actuator, which can be used in many conditions with the features of strong output force, high reliability, long lifespan and extensive application. The output force changes with the number of springs. The high stress resistant diaphragm, bearing maximum pressure of 0.5 MPa air supply, gives control valve a reliable shutoff. This type of actuator has a long life cycle with more than 1 million times.
